CNC turning and milling center

Goodway GS-2000SY

Condition: good (used), Year of construction: 2014, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, quill diameter: 78 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) Fpsdpfx Afjykikxjusd C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: excellent (used), Year of construction: 2011, Control system MXS 850 IV Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Fpsdpfx Afjyilzheujd Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, NCT 201/15” Touchscreen + USB Control (Windows based) Max. Swing over bed: 590 mm Max. Swing over cross slide: 340 mm Max. Turning diameter: 300 mm Center distance: 300 mm Chuck diameter: 8" Guide type: Linear Travels X / Z / Y / W: 160 / 455 / - / 325 mm Rapid traverse X / Z / Y / W axis: 24 / 30 / - / 24 mm MAIN SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-6 Spindle bore: D75 mm Bar diameter: max. D60 mm Drive: Belt Number of areas: 1 Motor power: 15 kW Cooling: Air DOUBLE SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-5 mm Motor power: 6.9 kW Drive: Belt TOOLS: Fpodpfox R Smkex Afued Tool change: Tool positions: 12 Tool equipment: VDI30 Number of driven tool positions: 12 Maximum driven tool speed: 4000 rpm SETUP: Footprint x Height: 2693 x 1810 x 1950 mm Net weight of machine: 4230 kg BAR LOADER: Type: BF1500 / DH65-LN Max. bar length: 1500 mm Max. bar diameter: 65 mm Weight: approx. 333 kg Accessories, equipments - Chip conveyor - Coolant system - Bar feeder - Finished part conveyor - Counter spindle - C-axis + driven tool turret - Tool holders - Manuals - CE marking - Foot pedals The machine has barelly been used. It is currently under power and located in Western Hungary and can be viewed upon request.

Condition: used, Year of construction: 2005, CNC Control: MSX 850 X Axis mm: 260 Z Axis mm: 795 Y Axis mm: +/- 50 Maximum Turning Diameter mm: 366 C-Axis Increment: 0.001° Maximum Turning Length mm: - Cutting Feed Rate mm/min X, Z, Y: - Swing Over Bed mm: Ø Swing Over Cross Slide mm: Ø Bar Capacity mm: Ø 80 (main) / Ø 51 (sub) Rapid Traverse Rate max. m/min X, Z: - Main Spindle 12" Spindle Speed rpm: 4,000 Spindle Power kW: 18.5 Torque Nm: - Spindle Bore mm: - Main Spindle Nose: A2-8 Sub-Spindle 10" Spindle Speed rpm: 6,000 Spindle Power kW: 11 Torque Nm: - Spindle Bore: - Sub-Spindle Nose: A2-5 Turret Positions: 12 Number of Driven Tool Stations: 12 Driven Tool Speed rpm: 6,000 Driven Tool Power kW: 5.5 Fodpfx Afjyc Ngqouopd EQUIPMENT Chip conveyor 3-color status lamp MACHINE DIMENSIONS Length mm: 4,414 Width mm: 2,370 Height mm: 2,115 Weight kg: 6,200

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Fsdpfewym Nfjx Afuopd Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, functionality: fully functional, overall weight: 1,000 kg, A machine designed to automate the gluing of display units, display stands, crowners and pall boxes. Its strength lies in its versatility. Easy to programme, it will fit into any gluing department seamlessly, causing minimal disruption to the department. Fsdpfx Asr Hqgxsfuspd

Condition: new, Year of construction: 2022, operating hours: 173 h, functionality: fully functional, machine/vehicle number: TJPM1003, turning length: 640 mm, turning diameter over cross slide: 215 mm, turning diameter: 215 mm, spindle motor power: 15,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 12 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, bar diameter (max.): 51 mm, Equipment: documentation/manual, rotational speed infinitely variable, Japanese Takisawa TM-2000 Y2 turning center with two turret, and Y axis (both), sub spindle and Fanuc 0iTF Plus controller. Demo machine with 173 h running time. Options: Kitagawa BB206 3 jaw chuck for main spindle Kitagawa B206 3 jaw chuck for sub spindle SMW (Mario Pinto) PPBE-42 collet chuck for main spindle SMW (Mario Pinto) collet chuck for sub spindle Raku-Raku monitor controller option Abnormal load detection function 9 bar high pressure coolant Bar feeder interface Remaining bar discharge device Tool setter (manual) Workpiece unloader with conveyor Chip conveyor Static toolholders Fedexn Sapjpfx Afuopd 2 pcs axial rotary toolholder

Condition: used, Year of construction: 1989, operating hours: 12,142 h, functionality: limited functionality, Equipment: chip conveyor, documentation/manual, For sale: 1989 Chiron FZ22 W machining center with dual pallet system. The machine operates accurately. Occasionally, there is a tool change error— the tool is not properly positioned into the spindle. Compatible with SK40 tool holder. Fitted with Sinumerik 810 control. Comes with chip conveyor and Knoll AE 1058.009 water treatment system; all machine manuals are included. Can be demonstrated under power upon request, currently not in production. Loading assistance is not available. Fodpfxsymbdij Afuepd