CNC turning and milling center

DOOSAN Puma 2600SY

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Rjdpfx Asxqq Hyof Sol

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Redpfovivx Nex Af Sjl Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: used, Year of construction: 2017, operating hours: 2,612 h, functionality: fully functional, GENERAL SPECIFICATION PUMA GT 2100M 1.1. CAPACITY : - Swing over bed (interference with front cover) / : 600 mm - Swing over saddle: 390 mm - Recomended turning diameter : 210 mm - Max. turning diameter : 300 mm - Max. work length : 513 mm - Bar working diameter : 65 mm - Max. permissible mass (including chuck) : o Chuck work : 150 kg o Shaft work : 300 kg - Base structure o Bed slant angle:30 deg. o Guideway type: Box guide 1.2. MAIN SPINDLE : - Drive mechanism : Belt-drive - Chuck size : 210 mm - Motor power (15 min / cont.) : 18,5 / 15 Kw - Spindle speed : 4.500 rpm 1.3. CARRIAGE : - Travel : o X axis : 230 mm o Z axis : 580 mm o C axis : 360 grade (in 0.001) - Rapid traverse rate : o X axis : 24 m/min o Z axis : 30 m/min o C axis : 200 rot/min - Continuous thrust force : o X axis : 6207 N o Z axis : 11305 N - Intermittent thrust force : o X axis : 9931 N o Z axis : 16958 N - Ballscrew (diameter x lead) : o X axis : 32 x 10 mm o Z axis : 32 x 10 mm - Servo motor: o X axis : 1,8 kW o Z axis : 3,0 kW 1.4. ACCURACY : - Positioning : Rodpfx Aox Ecwaof Sjl o X axis : 0,01 mm o Z axis : 0,02 mm o C axis : 0,0167 degrees

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV Rjdewlvlgjpfx Af Ssl CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device Rodpfx Aoxn Amtsf Sjl

Condition: excellent (used), Year of construction: 2012, Offered here is a Doosan Puma TT1800SY-GL CNC lathe including portal loader. The machine is in good condition and can be inspected under power in our warehouse. The scope of delivery includes various static tool holders and 4 driven tool holders. The machine will be loaded free onto truck by overhead crane. Make: Doosan Redpfxexmkfho Af Ssl Model: Puma TT 1800SY-GL Control: Fanuc 31i Year of manufacture: 2012 Technical Data: Turning diameter (lower and upper turret): 230 mm Turning diameter over bed: 230 mm Turning diameter over slide: 230 mm Recommended turning diameter: 210 mm Chuck size (both spindles): 210 mm/ 8 inch Spindle bore: 65 mm Travel: X1-Z1 (upper turret): 165x700 mm X2-Z2 (lower turret): 190x720 mm Y (upper turret): 100 mm A (sub spindle): 770 mm C-axis: 360° (0.001° increment) Feed rates: X1-X2-Z1-Z2: max. 20 m/min Y: 7.5 m/min A: max. 40 m/min Spindle speeds (both spindles): 6000 rpm Spindle power S1: 22/19.6 kW Spindle power S2: 22/18.5 kW Torque (both spindles): 208 Nm Number of tool stations: 24+24 (lower and upper turret) Rotational speed of driven tools: max. 6,000 rpm Torque driven tools: 5.5/2.2 kW (7.4/3.0 kW) Power consumption: 64.86 kVA Dimensions: 3905x2250x2600 mm (machine only) + portal loader

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 450 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 32 mm, travel distance Z-axis: 450 mm, spindle motor power: 20 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, bar diameter (max.): 51 mm, CNC Fanuc 16i WORKING AREA: Max rotation diameter: mm 500 Rotation diameter above transverse guide: mm 300 Transverse travel (X): mm 160 Y-axis travel: mm +-32 Longitudinal travel (Z): mm 450 MAIN SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Bar capacity: mm 51 Front bearing diameter: mm 100 Power (40/100% ED): kW 20/16 Torque (40/100% ED): Nm 200/155 Rotation speed: rpm 20-6,000 COUNTER SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Spindle bore: mm 37 Front bearing diameter: mm 75 Power (40/100% ED): kW 9/7.5 Torque (40/100% ED): Nm 57/48 Rotation speed: rpm 20-6,000 FEEDS: Z-axis rapid: m/min 45 X-axis rapid: m/min 60 TOOL TURRET: Number of motorized tool stations: 12 Power (40/100% ED): kW 10 Torque (40/100% ED): Nm 20 Rotation speed: rpm 5.000 Machine complete with: Rsdswhkm Ropfx Af Ssl • No. 03 radial motorized modules • No. 02 universal motorized modules • No. 3 fixed tool holders • Self-centering main spindle Autoblok diam. mm 210 • Self-centering counter-spindle Autoblok diam. mm 160 • Instruction manuals and CE declaration Year of construction: 2004

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D Redst Tyqmepfx Af Ssl The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) Rodpfxsxxpaus Af Sel - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition; inspection during operation is possible by arrangement. Bar feeder length: 1,500 mm. Equipped with Fanuc control system, new linear guides and covers installed in 2024. Runs without issues, accuracy within 0.02 mm. Rsdpfx Afjxy N Ihe Ssl