Turning Automatic Lathe - Longitudinal

TSUGAMI HS 2075AX

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Ljdpfx Afsx Hib Re Ssta Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 Ltsdpfswlvlgox Af Sja DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, Ledoxv Svmspfx Af Seta 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 450 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 32 mm, travel distance Z-axis: 450 mm, spindle motor power: 20 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, bar diameter (max.): 51 mm, CNC Fanuc 16i WORKING AREA: Max rotation diameter: mm 500 Rotation diameter above transverse guide: mm 300 Transverse travel (X): mm 160 Y-axis travel: mm +-32 Longitudinal travel (Z): mm 450 MAIN SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Bar capacity: mm 51 Front bearing diameter: mm 100 Power (40/100% ED): kW 20/16 Torque (40/100% ED): Nm 200/155 Rotation speed: rpm 20-6,000 COUNTER SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Spindle bore: mm 37 Front bearing diameter: mm 75 Power (40/100% ED): kW 9/7.5 Torque (40/100% ED): Nm 57/48 Rotation speed: rpm 20-6,000 Ljdpfx Ajwhkm Rof Seta FEEDS: Z-axis rapid: m/min 45 X-axis rapid: m/min 60 TOOL TURRET: Number of motorized tool stations: 12 Power (40/100% ED): kW 10 Torque (40/100% ED): Nm 20 Rotation speed: rpm 5.000 Machine complete with: • No. 03 radial motorized modules • No. 02 universal motorized modules • No. 3 fixed tool holders • Self-centering main spindle Autoblok diam. mm 210 • Self-centering counter-spindle Autoblok diam. mm 160 • Instruction manuals and CE declaration Year of construction: 2004

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Ltjdpjt Tyqmefx Af Sea Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2015, Data Fanuc 32i B Chuck: 250 mm / 170 mm Bar passage: 65 mm Y-axis: 120 mm Turret: 20 positions Ltjdpfxoxmid Ns Af Soa Tool measurement Parts catcher Chip conveyor