Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 15361772, 1 used TIG welding machine Manufacturer: Fronius with digital measuring system. Portable with handle. Model: Trans TIG 2200 with pulses. Year of manufacture: 2015 Condition: good TIG working voltage 10.1 - 18.8 V Electrode 20.4 - 27.2 V Ignition voltage 9.5 kV The arc ignition device is set up for manual operation. Protection class IP 23 Cooling type AF Cooling unit FK 2200 230 V, 1.3 A, pmax 4.3 bar Insulation class B Bwelqewahtxe R Dpqjl EMC A Dimensions 485 x 180 x 390 mm Weight 16.4 kg Test mark S / CE 3 A / 10.1 V 220 A / 26 V X 40°C 40% 220 A 18.8 V 60% 180 A 17.2 V 100% 150 A 16.0 V Mains connection 230 V Ncjbmmvyovcp Uwohwsp Instruction manual included Various hose packages with high-quality torches

Condition: good (used), Offer 24526 Clamping, straightening, and welding table with perforations Technical specifications: - Length 1500 mm - Width 1000 mm - Workpiece thickness 25 mm - Hole diameter 28 mm Bslq Rjwfgf Re Dpqewl - Center distance of holes 100 mm each - Total height adjustable approx. 880 mm - Vice LEINEN type Junior 125 - Weight approx. 350 kg

Condition: excellent (used), Parallel-guided, water-cooled spot welding machine Brand DALEX Type PL 40 Rated power at 50% duty cycle: 40 kVA Secondary short-circuit current: 21.5 kA Secondary open-circuit voltage: 5.5 V Single-stroke cylinder - electrode stroke 65 mm Electrode force: 65-390 daN Arm reach: 450-750 mm adjustable Arm spacing: 150 or 310 mm Equipped with an add-on control cabinet in accordance with VDE 0110 Main switch Bslq R Dpowd I Anjqewl Synchronous welding control system MPS 1036 Straight tubular arm with 750 mm reach Photos show loading condition (electrode arms were removed due to pallet dimensions)

Year of construction: 1988, Condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Bjlqswfg Ewj R Dpqowl

Condition: like new (used), Year of construction: 2017, TRUMPF TruDisk 5001 (6C) * MFD 2017, as-new condition Bslqjqfguae R Dpqswl * laser power: 5 kW * wavelength: 1030 nm * beam quality: 4 mm mrad * beam switch for 4 fiber exits, min. fiber diameter: 100 µm * fiber connector: LLK-D * option: field bus interface & IIO3-card * 2 identical lasers available

Condition: good (used), Welding curtain, welding protection wall, sliding curtain, welding curtain, slatted curtain Bslqev Ullcs R Dpqjwl -Welding protection wall: Welder protection wall -Length: 3145 mm -Number: 3x protective wall available -Dimensions: 3145/600/H2120 mm -Weight: 120 kg/piece

Condition: good (used), Year of construction: 2007, 400 V, 26 kW, dead weight: 6,150 kg. Control system: Siemens Sinumerik, laser (make: Rofin, type: DC 020, control: Rofin). Chip/material conveyor (make: FB Automazione, serial number: 322-06-12, year of manufacture: 2007), filter system (make: Sideros, type: FL045L00A1, year of manufacture: 2006), hydraulic cooling system. Pipe storage: approx. 660 cm. Bwslq R Dowduizopqsl

Condition: new, neu ca. 4 Wochen ab Auftragse 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) Bwslq R Dsvzh Nkjpqol - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: refurbished (used), Functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 330 A, For Sale: EWM Phoenix 330 ColdArc 330 AMP Watercooled Pulse Double pulse ColdArc Refurbished + Serviced Including: 3 Months warranty, double wire feeder, transport cart, 2x Welding torches, earth work lead with clamp, and 2x gas hose. With this machine you can weld Steel, Stainless Steel, and Aluminium. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Bjlq Rsv Ubz He Dpqswl Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2011, Condition: ready for operation (used), Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Bwjlq R Dpowfg Edsqol

Condition: used, Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 87874 DS, power: 10 kW (13.60 HP), Arnold stapling station: Bolsrvyrboq R Dpqewl Max. Back-up fuse: 63 A Mains connection: 3 x 400 VAC + N + PE Power: 10 kW Control voltage: 24 VDC Incl. KLH Kältetechnik W05.HL3 and Trumpf TruPulse 103

Condition: new, - 20 kVA power - 500 mm extension - Arm diameter 50 mm Bwslq R Djgg N Uqepqel - The arms are adjustable in straight and inclined positions - Documentation

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% Bslqowd Nlkj R Dpqswl - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: new, neu ca. 4 Wochen ab Auftragse 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg Belq R Dpevn Altsqjwl 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, Never used Year of production: 2017/2018 Quantity: 5 pieces Never used Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Bwolq R Dotu Udiepqsl Noise level - 70 dB(A)

Year of construction: 2001, Condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range with a bar diameter of 3mm to 6mm: 500mm-2150mm, mesh width range with a bar diameter of 2mm to 3mm: 500mm-2000mm. Grid length range with a rod diameter of 3mm to 6mm: 600mm-3000mm, grid length range with a rod diameter of 2mm to 3mm: 600mm-2000mm. Min. cross wire pitch: 12.5mm, min. longitudinal wire pitch: 25mm, wire diameter range: 2mm-6mm, max. number of longitudinal wires: 52, production capacity: 52 strokes/min, rated power at 50%: 840kVA, max. stack height: 600mm. Total system dimensions X/Y/Z: approx. 20000mm/7600mm/3400mm. Including longitudinal wire distributor in 40mm and 50mm pitch and longitudinal wire console in 40mm, 50mm and 75mm pitch. Documentation available. On-site inspection is possible. Bwsljwfg Eqeq R Dpqol

Condition: new, neu ca. 4 Wochen ab Auftragse 1940 € 2000 x 1000 mm 850 mm 450 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m² Bwslqevn Alge R Dpqsl

Condition: excellent (used), Year of production: 2017/2018 Quantity: 5 pieces Bslq R Djtvf Enepqowl Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Year of construction: 2009, Condition: ready for operation (used), A fully automatic lattice girder welding system for the production of reinforcing steel (rebar) is available. Outlet height: 1400mm, beam length min./max.: 800mm/16000mm, base width: 58mm, beam width range: 70mm-116mm, max. production capacity: 15m/min. Beam type KT: upper beam diameter range: 5mm-16mm, lower beam diameter range: 5mm-16mm, diagonal beam diameter range: 4.5mm-9mm, beam height range: 70mm-400mm, diagonal pitch: 190mm-210mm. Beam type KTS: top chord diameter range: 5mm-7mm, bottom chord diameter range: 5mm-7mm, diagonal beam diameter range: 5mm-7mm, beam height range: 80mm-310mm, diagonal spacing: 200mm. Documentation available. On-site inspection is possible. Belowfg Ekoq R Dpqjwl

Condition: new, neu ca. 6-8 Wochen ab Auftrag 1490 € 1500 x 1000 mm 850 mm 344 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 Bslqovn Alaj R Dpqowl The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, Year of construction: 2024, Year of production: 2024 Model: R1550 Bjlq Revbbn Hs Dpqowl Serial number: V00324 Max demand: 12KW Rated voltage: 220V/50HZ/1 PHASES Max current: 32A

Condition: new, neu ca. 6-8 Wochen ab Auftrag 1190 € 1000 x 1000 mm 850 mm 450 kg 25 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 Bwjlqjvn Akps R Dpqel The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, Year of construction: 2023, OKIO 2000W automatic 4-axis fiber laser welding machine Power: 2 kW Country of origin: China Number of axes: 4 Travel distance in the X-axis: 500 mm Travel in the Y-axis: 300 mm Travel in the Z-axis: 300 mm Work table dimensions: 350 mm × 450 mm Bwjlq R Dpepq Nzasqel Travel speeds: Y-axis: 10 m/min X-axis: 10 m/min Z-axis: 5 m/min Positioning accuracy: ±0.02 mm 4th axis: Positioner Rotational positioning accuracy: ≤0.05 mm Power supply: 220 V/380 V Power requirement: 7.5 kW Geräteabmessungen: 500×1400×1900mm Weight: 280 kg Cooler Welding source: MAX Mounting plate, welding head CCD visual observation system - uses a high-resolution camera and monitor to improve welding efficiency and quality OKIO automatic laser welding machine can realize the welding of metal components in straight lines, circles and other arbitrary trajectories, such as cell phone cases, cell phone batteries, sensors, medical devices and other industries. Laser welding machines use high-energy pulsed lasers to weld objects. High energy and high laser pulse density can make the welding smooth, the weld width is small, and the heat-affected zone is small.

Condition: new, neu ca. 6-8 Wochen ab Auftrag 6400 € 132.48 € 3000 x 1500 mm 850 mm 8000 kg Bwelq R Devx Dv Uspqjl 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 4 Wochen ab Auftragse 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) Bolqevzh H Ao R Dpqjwl - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners