Used veneer presses for sale (118)

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 9 PLATENS - Platens dim. mm. 800x800 - Opening mm. 1600/1800 - Cylinder diam. 350 mm. Hpedpewryw Tsfx Ad Asa

Condition: good (used), ORMA LCC44/14 CONTINUOUS PRESS LINE WITH PREPARATION BELT AND OUTPUT BELT OSAMA TYPE S4R/P-1400 GLUING MACHINE, 4 ROLLERS Hpedpsvtx Hkefx Ad Aja

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Hpjdpfx Aot Eq E Sod Aja Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: Hpjdpfomb U A Iex Ad Asa 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Hpodpfx Adowd N Rme Asa Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Technical specifications: Number of pistons: 6 Piston diameter: 140 mm Connection to central heating Hpodpew U Nvpsfx Ad Aoa Shelf dimensions: 3500x1300 mm Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: SOC 469/10, Membrane press with angled worktop. The special, patented shape of the worktop allows flat surfaces up to 70 cm to be plated. Hpedevu Dvaspfx Ad Aja

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press Hpodpfstwp Iwex Ad Asa connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: ready for operation (used), Hot press Hedpfxjwbwixs Ad Ajpa Plan size 2500 x 1300 mm 1 intermediate plan 4 pistons

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 800 kN Setting range 10 – 100 % Hsdpfx Ajfhqhdjd Aspa Total pressing surface 3100 x 1300 mm Specific pressure at full charge 2,0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 265 bar Daylight height 400 mm Heating platens: Electric heating platen 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: excellent (used), Hot Platen Press with Medium Heating Platens Hpjdpfx Adovzq Rkj Asa Pressing area 2750 x 1300 mm Number of press cylinders #6 Total pressing force 100 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx. 3.0 kW Space requirement (L x W x H) approx.: 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Hydraulic Hot Platen Press Down-piston design Medium heating plates - for connection to the central hot water supply Pressure continuously adjustable via pressure switch Central control panel Analog temperature display for heating plates Safety ripcord Rack compensation Main switch Automatic opening Stroke limiter CE NEW AL cover plates

Condition: used, Year of construction: 1984, Special pressing size, large pressing depth 1600 mm Pressing length 2750 mm Plate size 2750 mm x 1600 mm - 2.75 x 1.60 m - with 3 heating plates 2 levels incl. control system – newly retrofitted retrofitted Used, in good condition Manufacturer: Ott Model 300 K 135 Year of manufacture: 1984 Machine number: 13741 Number of levels: 2 pieces Cover sheets hard-anodized Plate size approx. 2750 mm x 1600 mm Opening width approx. 185 mm Tip control Safety cable below Side guidance Electrical heating Specific pressing pressure max. 5.5 Piston diameter 90 mm Lower pistons: 6 units Original price approx. €40,000 Space required approx. 3600 mm x 1600 mm x 2000 mm Total connected load 49 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Delivery in the current as-inspected condition, Hsdsv Hhudopfx Ad Ajpa without warranty or guarantee

Condition: good (used), functionality: fully functional, heating capacity: 14 kW (19.03 HP), Machine types: U 60 Machine no: 78/3103137 Power: 3/380V/50Hz Total power 14 Kw Press area: 2200X1250X400mm Hjdpowb Skkjfx Ad Aspa

Condition: not inspected (used), Year of construction: 1975, Power supply 400V 13kW Hpjdpfx Adjkkflbo Aoa 2 heating plates à 1200 x 2250 mm heating plates controlled by 2 thermostats pressing pressure at 250 bar LxDxH: 2590 x 1330 x 1950 mm weight approx. 2800 kg pressing thickness 380 mm

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total width: 3,090 mm, total length: 2,000 mm, total height: 3,600 mm, overall weight: 3,800 kg, type of input current: three-phase, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 2,600 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Hsdpfetx T Tyjx Ad Ajpa

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 700 kN Setting range 10 – 100 % Total pressing surface 2500 x 1250 mm Specific pressure at full charge 2,2 daN/cm² (kg/cm²) 4 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 348 bar Daylight height 400 mm Heating platens: Hodpfxefhqhas Ad Ajpa Electric heating platen 2500 x 1250 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: ready for operation (used), Shelf length 250 cm Shelf width 110 cm Clearance 40 cm Motor 1.1 kW 4 hydraulic cylinders Hpjdpfx Adswx H Hbe Aoa

Condition: used, with new Mylar film used, in good condition Brand: Joos Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee. Hpsdpfxsww Nd He Ad Aea

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, BURKLE MULTIFOILER Press Model M8 + STOLMAT Spray Booth Wall Machine for covering flat and formed MDF furniture components with thermoplastic foils. Basic machine data: • Electrical connection power: approx. 28 kW (without optional components), • Operating voltage: 400 V, 50 Hz, 3-phase, • Control voltage: 24 VDC, • Required air pressure: min. 6 bar, • Air connection diameter: min. 1 inch, • Required air volume: max. 2880 l/min, • Air consumption during pressing process: ◦ 4 bar forming pressure: approx. 720 l/cycle, ◦ Chamber filled to 50%: approx. 360 l/cycle. Hpjdpfxowfz Nke Ad Aoa Operating side: in the direction of feed, right-hand side. Electrical equipment: • In compliance with DIN/VDE (EN 60204) standards, • Electrical documentation according to VDE, • Paint color: machine and control cabinet RAL 7035 light grey, decorative elements RAL 5002 blue. Working materials: • Material applied: ◦ PVC foils 0.30–1.0 mm, ◦ High gloss foils 0.50–1.0 mm, ◦ PET foils 0.35–0.60 mm. • Material processed: ◦ MDF board (smooth or profiled surface), ◦ Board temperature: approx. +18°C, ◦ Board moisture content: approx. 6–8%, ◦ Board density: approx. 750 kg/m³. Technology: • Thermal forming without membrane, • Working area: 1330 x 2430 mm, • Maximum workpiece size: 1250 x 2350 mm, • Minimum foil width: 1400 mm, • Workpiece thickness: 6–35 mm (depending on part geometry). STOLMAT Spray Booth Wall 1. Purpose of the device: • Wall for extracting paint dust and vapors. • For capturing dust generated during spray application of paints and lacquers onto furniture components. • Designed for use with high-efficiency spraying equipment (spray gun). • Filtration efficiency >96%, eliminating the need to clean exhaust ventilation ducts. • Equipped with side covers ("tapacze") to improve extraction efficiency. 2. Technical data: • Dimensions (LxWxH): 2500 x 2130 x 700 mm, • Fan type: duct fan 500, • Fan capacity: max 7500 m³/h, • Max pressure: 400 Pa, • Fan motor power: 1.85 kW, • Voltage: 230/400 V, • Number of fans: 1 unit, • Filtration surface (1st stage – cardboard filter): 4.80 m², • Filtration surface (2nd stage – PS fiber filter): 2.50 m², • Dust filtration efficiency: >96%. 3. Technical description: • The spray extraction wall is made of galvanized steel sheet, 1.5 mm thick. • Wall elements are connected by screwing and sealed with acrylic mass. • The fan is mounted on a wall bracket. • Side covers ("tapacze") made of galvanized steel sheet. 4. Dust filtration parameters: • Cardboard filter (labyrinth type): ◦ Class G3 (DIN 53438, EN 779), ◦ Thickness: 60 mm, ◦ Flow rate: 1200–3800 m³/h/m², ◦ Filtration efficiency: 90–98%. • PAINT STOP filter: ◦ Flow rate: 2500–6300 m³/h/m², ◦ Filtration efficiency: 93–97%.

Condition: used, Year of construction: 2008, machine/vehicle number: 0806060, Veneer Guillotine Hodpfx Adowi Nqws Aepa Cutting length - 2800 mm Cutting height - 100 mm Cutting width - 25-800 mm Weight 3900 kg

Condition: excellent (used), functionality: fully functional, HOT PRESS model ITALPRESSE SCF 6 with hot platens second hand machine for wood, veneer, composite materials, furniture, panels etc plates useful size mm. 3000 x 1300 n.06 pistons diam.mm. 70 max. thrust Ton. 90 opening mm. 400 hot water plates heating with wood fired boiler weight kgs. 5000 volt. 380/50 Hpsdpeq Slt Ijfx Ad Aea

Condition: as good as new (ex-display), - pressing force: 700 kN - pressing surface: 2500 x 1250 mm - medium heated (water) with heating unit max. temperature 85 °C - incl. Joos-A.B.S.-Safety-System to protect the heating platens in case of incorrect loading or forgotten parts Hedpfx Adowaznj Aopa

Condition: excellent (used), Opening: 530mm Hpedpfev U A H Djx Ad Aoa

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Opening width approx. 280 mm Aluminum plates Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Weight approx. 3000 kg Total connected load 13.2 kW heating power Hpodpfxswrtlqs Ad Aja Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without guarantee and warranty

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm Hedpfx Ads T R Nhj Aspa total pressing force 900 KN (=80 MP) specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar goldclour anodized heating platens, tooth rack guidance