Veneerpress
Joos
HP 90
Veneerpress
Joos
HP 90
Condition
Ex-display machine
Location
D - Baden-Württemberg
Veneerpress
Joos HP 90
MACHINE DATA
- Machine type:
- Veneerpress
- Manufacturer:
- Joos
- Model:
- HP 90
- Condition:
- as good as new (ex-display)
PRICE & LOCATION
LISTING DETAILS
- Listing ID:
- A101-2582
- Update:
- 09.06.2022
DESCRIPTION
total pressing surface 2550 x 1350 mm
total pressing force 900 KN (=80 MP)
specific pressure force 2,6 daN/cm² (kp/cm²)
4 cylinder 80 mm diameter 400 mm stroke
Yo9kdg
operating pressure 355 bar
goldclour anodized heating platens, tooth rack guidance
total pressing force 900 KN (=80 MP)
specific pressure force 2,6 daN/cm² (kp/cm²)
4 cylinder 80 mm diameter 400 mm stroke
Yo9kdg
operating pressure 355 bar
goldclour anodized heating platens, tooth rack guidance
SELLER
Gottfried Joos GmbH & Co. KG
Contact person: Herr Reinhard Schatz
Langestraße 41
72285 Pfalzgrafenweiler, Germany
Registered since: 2009
Firma Joos produziert seit über 80 Jahren hydraulische Pressen für internationale Kunden aus den Bereichen Automobil- und Flugzeugbau und der Holzindustrie.
Weitere rechtliche Angaben
Kommanditgesellschaft, Sitz Pfalzgrafenweiler
Registergericht: Stuttgart HRA 430405
Persönlich haftende Gesellschafterin
Gottfried Joos GmbH, Sitz Pfalzgrafenweiler
Registergericht: Stuttgart HRB 430279
Geschäftsführer: Jonas Joos, Reinhard Schatz
USt-ID-Nr. DE144252802
Registergericht: Stuttgart HRA 430405
Persönlich haftende Gesellschafterin
Gottfried Joos GmbH, Sitz Pfalzgrafenweiler
Registergericht: Stuttgart HRB 430279
Geschäftsführer: Jonas Joos, Reinhard Schatz
USt-ID-Nr. DE144252802
Send inquiry
TELEPHONE & FAX
These listings may also fit your interest.
2
Electro-hydraulic hot plate press,
pressing area 2500 x 1300 mm, four cylinders, 400 mm opening,
Vvrs9y
emergency stop.
2
Furnierpresse Joos
Mit goldeloxierten Platten
Type HP 65/2
Pressfläche 1100 mm x 2500 mm
Mit goldeloxierten, kratzfesten Heizplatten
Elektrisch beheizt
Mit Tipp Steuerung
Ges. Presskraft 650 kN
Höhe des Pressraumes, Öffnung maximal 400 mm
4 Presszylinder
Zylinderdurchmesser 80 mm
Zahnstangenführung
Pressdruck 2,4 kg/cm² bei 100% Auslegung
Pressdruck 3,4 kg/cm² bei 70% Auslegung
Hvqfjwh
Betriebsdruck 325 bar
Leistungsbedarf 1,1 kW
Schließzeit ca. 16 sek.
Sicherheitsleiste Fuß-Stopp Le...
11
Veneer press
JOOS HP 80/3
year 1987
connected load: 17,5 kW (power per heating plate: 8.200 W)
gold anodized aluminum heating plates
pressing area: 250 x 125 cm
opening width:350 mm
Cguxuu3qe9
4 hydraulic cylinders each 80 mm diameter
operating pressure: 385 bar
Spec. pressure: 2,5 daN/cm²
Pressing pressure: 800 kN
Circumferential safety step (emergency stop)
swiveling operating unit
Dimensions (approx.dimensions):
L: 285 cm
W: 141 cm
H: 200 cm
Weight: approx. 3.100 kg
Very good original cond...
6
Hessisch Lichtenau
1970
used
Hydraulic press, Hydraulic panel press JOOS type HP 75
Veneer press
make no. 994 year of construction approx. 1970
nominal pressing force 75 ton. (not reached)
pressure force 60 ton. at 300 bar
table area 2200 x 1250 mm
ram area 2200 x 1250 mm (without press plate)
Column width front 2235 mm
column width lateral 1260 mm
Ram stroke 335 mm
Installation height max. 335 mm (without upper pressing plate approx. 50 mm)
Table height above floor approx. 960 mm
Tank capacity approx. 40 liters
Pressure bu...
7
Second hand machine
Technical data:
Qyvsx
Pressing surface 2500 x 1100 mm
Total pressing pressure 650 kN
Opening width 400 mm
Number/diameter cylinder 4/80 mm
Operating pressure 325 bar
Closing time approx. 16 sec.
Dimensions 2600 x 1300 x 1970 mm
type of plate: alu / nature
thickness approx. 51 mm
Connected load per heating plate approx. 6.8 kW
Heating time to 90° C approx. 16 min.
Emergency stop: foot switch on all sides
Weight: 2500 kg
Availability: Short term
Storage location: R...
8
Randers
2000
excellent (used)
Max. press measures : 2550 x 1350 mm
Pq3kv
Max. press opening : 400 mm
Electric heated
Total Kw : 22,5
Number of pistons : 6 ( 90 mm diameter )
2 hand operated ( Security )
2 x Emergency stop wire arround the machine
Mylar press table cover on the back of machine
CE Marked
Electric diagram
Like new all over
3
TECHNICAL DATA
dimensions of heating plates: 2500x1300mm
number of shelves: 1
electrically heated shelf
clearance: 400mm
thickness of heating plates: 9mm
number of cylinders: 4
cylinder diameter: 80mm
Pxjwma
pressure: 2.15daN/cm2
max temperature of the heating plate: 200 degrees
emergency disconnection of the machine
total power: 19.1kW
dimensions length/width/height: 2860x1500x2050mm
weight about: 3500 kg
15
Langenfeld (Rheinland)
1993
good (used)
Electrically heated veneer press
pressing area 2500 x 1300mm
Electric heating plates with gold anodized coating
Cfaecwd0x3
scratches due to age are present
Heating power per plate 8,9kW
The bonding of the heating plate is apparently a bit loose in the middle (pressing plate slightly curved upwards), but when pressing the plate becomes straight
Maximum temperature 120°C
Maximum opening approx. 400mm
Circumferential emergency stop cord inside and outside
Press moves to and holds preset pressure w...
5
Used veneer press (cold press)
Internal machine number: m3356
Manufacturer JOOS
type HP 80/3
pressing area 2.500 x 1.250 mm
Cfajvqfkku
max. workpiece height 350 mm
weight approx. 3.000 kg
Space requirement approx. 2.9 x 1.45 x 2.05 m
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tried out under power.
A forklift / crane for loading is available.
There is the possibility to expertly examine the items for sale, on site. Specific questions should be clarified in...
5
Model: HP-80
Shelf 125 x 250 cm
In very good condition.
Cesyxaaf73
5
Second hand machine
Technical data:
Pressing surface 2500 x 1100 mm
Total pressing pressure 650 kN
Opening width 400 mm
Number/diameter cylinder 4/80 mm
Operating pressure 325 bar
Closing time approx. 16 sec.
Dimensions 2600 x 1300 x 1970 mm
type of plate: alu / nature
Qyvtv
thickness approx. 51 mm
Connected load per heating plate approx. 6.8 kW
Heating time to 90° C approx. 16 min.
Emergency stop: foot switch on all sides
Weight: 2500 kg
Availability: after contact
Storage location...
3
Connected load 380V 18kW
Jyflaq
pressing area 2500 x 1300 mm
Working pressure 350 bar
pressing pressure 700 kN
Weight approx. 2700 kg
4
Berlin, Germany
(dealership location)
1998
ready for operation (used)
Working surface: 2200x1250mm, pressing force: 65t, connected load: 1.4kW, length: 2540mm, width: 1450mm, height: 1950mm, weight: 2.6t.
Zp88c
1
Pfalzgrafenweiler, Germany
(dealership location)
as good as new (ex-display)
total pressuring force 800 kN
total pressing surface 3000 x 1300 mm
specific pressure at full charge 2,1 daN/cm² (kg/cm²)
Hdjsxmew
6 cylinders 80 mm diameter 900 mm stroke
hidth lower pressing table/working hidth 500 mm
9
Fumane, Italy
(dealership location)
2016
used
Used Filling Monoblock for Water SMI 2016 Manufacturer SMI SpA Model ECOBLOC 16 90 18 HP VMAG Year 2016 Speed b h 31 000 bph for the PET bottles format 1 lt 1 5 lt 0 5 lt 27 000 bph for the PET bottles format 2 lt 2 lt weight 35 94 mm H 349 mm 1 5 lt weight 40 88 mm H 336 mm 1 lt weight 25 78 mm H 320 mm 0 5 lt weight 12 66 mm H 204 mm Processed formats 2 0 lt 1 5 lt 1 lt 0 5 lt Rotation direction Counterclockwise Accident prevention protections Yes Manuals available Yes Revisions available Yes ...
15
London, United Kingdom
(dealership location)
ready for operation (used)
Condition Used
Stock Number 00013
This listing is for the HP 5890 Series II Plus GC
This unit is sold on its own.
Qlxrvqbl
The Hewlett Packard HP 5890 Series II Gas Chromatograph is a chemical analysis instrument used for separating chemicals in a complex sample. This instrument uses a flow-through narrow tube known as the column, through which different chemical constituents of a sample pass in a gas stream (carrier gas, mobile phase); the constituents move at different rates depending on t...
9
Joos HP45 veneer press
- German production
- DTR
TECHNICAL PARAMETERS:
- shelf dimensions 1800 x 900 mm
- clearance between shelves 415 mm
- electric heating of shelves
- max heating temperature 1200
- total power 11.9 kW
- four 65 mm actuators
3lmxgpu
- pressure force 2.7 kg / cm2
- max pressure 350 bar
Transport dimensions
225x110x190 cm
weight ~ 1980 kg
7
Condition Used
This listing is for a HP 5890 GC With 7673 autosampler controller and 6890 InjectorHP 5890 GCHP 7673 Auto SamplerHP 6890 InjectorThe Hewlett Packard HP 5890 Series Gas Chromatograph is a chemical analysis instrument used for separating chemicals in a complex sample. This instrument uses a flow-through narrow tube known as the column, through which different chemical constituents of a sample pass in a gas stream (carrier gas, mobile phase); the constituents move at different rates ...
10
Condition Used
This listing is for a HP 6890 GC with Autosampler, Controller and 6890 InjectorHP 6890 GCHP 6890 Series InjectorHP Auto Sampler Controller G1512AThe Agilent 6890 series GC features electronic pneumatic control of all gas pressures and flows. On board sensors automatically compensate for ambient temperature changes and barometric pressure differences to routinely achieve more accurate and reproducible results. By providing stable results, EPC reduces re-calibration frequency and im...
6
Used Eurotherm Drives 590 Digital 20HP /15 KW 590 Regenerative DC Drive.
Eurotherm Drives
590 Digital
ssd
Supply Voltage: 500 VAC, 29 AMPS, 3 PH, 50/60 Hz
Output Rating: 20 HP
Baumbukq
Armature Output: 460 VDC, 35 AMPS
Field Supply Volts: 500 VAC, 1PH
Field Output Current: 10 AMPS DC
Auxiliary Supply: 110 VAC, 1PH, 4 AMPS
1
Wiener Neudorf, Austria
(dealership location)
new
neu
ca. 10 Wochen ab Auftrags
Türkei
25300
468.05
Bwwqff8dlb
90 mm
260 mm
3
5.5 kW
6,37 m/min
100x20 mm / 2000 mm; 80x2
125x25 mm / 600 mm; 60x5
45x45 mm / 500 mm; 15x15
Ø 50 mm / 500 mm; Ø 15 mm
Ø 100x2,5 mm / 1200 mm; Ø
80x25x3 mm / 800 mm; 25x1
70x3 mm / 1300 mm; 25x2 m
80x80x8 mm / 800 mm; 30x3
70x70x7 mm / 700 mm; 30x3
UPN 140 / 1600 mm; UPN 12
UPN 140 / 1600 mm; UPN 12
IPN 120 / 600 mm; UPN 80
1700 mm
1450 mm
1200 mm
2800 kg
4 roll machine...
15
- Shaft diameter 90 mm
- Roller diameter 260 mm
- Lower three rollers are moved hydraulically
Bhuaoplo
- 3 digital displays
- Brake motor
- Can be used horizontally/vertically
- Mobile control panel
- Emergency stop
- documentation
- Weight 2800 kg
- 400V
Oradea
2012
refurbished (used)
Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897
Max working width: 120 mm
Max. roll width 80 mm
Electric connection: 230 V, 50 Hz, 500 W
Own weight: 50 kg
Total dimension L 1000 mm x W 800 mm x H 1900 mm
Pld8b
Description
Including mobile frame, documentation available
Working speed 30m per minute
Saves in the software the models of over 100 labels
It has both configurations on the left LH and on the right Rh, at the customer's option
Lumino...
6
Used Eurotherm Drives 590 Digital 150HP /110KW DC Drive.
Eurotherm Drives
590 Digital series
Model:
Supply Voltage: 500 VAC, 222AMPS, 3 PH, 50/60 Hz
Output Rating: 150HP
Armature Output: 460 VDC, 270AMPS
Field Supply Volts: 500 VAC, 1PH
9qaohcuov
Field Output Current: 10 AMPS DC
Auxiliary Supply: 115 VAC, 1PH, 4 AMPS
6
Used Eurotherm Drives 590 Analog 100HP /75KW 590 DC Drive.
Eurotherm Drives
9qanuajgt
590 Analog series
Model: 590A/1800/9/0
Supply Voltage: 500 VAC, 148 AMPS, 3 PH, 50/60 Hz
Output Rating: 100HP
Armature Output: 460 VDC, 180 AMPS
Field Supply Volts: 500 VAC, 1PH
Field Output Current: 10 AMPS DC
Auxiliary Supply: 110 VAC, 1PH, 4 AMPS
5
12
2
Rexroth prop. directional control valve NG6
- removed from KM 380 CXL
- removed from running machine
- fully functional
E7d30snm0
manufacturer: Rexroth
type: NG6
sparepart no.: R900929205
4WREE6W2-32-2X/G24K31/A1V
Dition: used
2
Motoman EA1900n industrial robot, 6 axis, 3 kg payload, 1893 mm horizontal arm reach and 0.08 mm accuracy in repeatability. Special design arc welding robot with hollow wrist to improve manouveranility.
Qllbb
NX100 controller features
Faster, feature-packed, highly reliable and easier to use - Motoman's new NX100 robot control system has arrived. NX100 is the PC-based high performance robot controller.
The NX100 controller features a Windows® CE programming pendant with full colour LCD touch sc...
5
5
5
6
Kaiserslautern, Germany
(dealership location)
2011
ready for operation (used)
Control Unit
Brand Stillmec 90
Model TS9003
Main Drive
Qnkm2
Pressing force 2000 kn
Bending length 6500 mm
This Stillmec 90 6500 x 200 ton Bending machine was made in the year 2011 in Italy. It is equipped with a Stillmec 90 TS9003 control unit. The machine has a pressing force of 2000 kN, it is in perfect condition with an integrated fold-down X and R axis.
Application Types
Bending
6
Weilheim an der Teck
1993
excellent (used)
working surface approx. 2500 x 1100 mm
Q8val
electrically heated
gold anodized heating plates
pneumatic version
minimum workpiece thickness 18 mm
maximum workpiece thickness 100 mm
opening / stroke 120 mm
nominal volume 140 l
recommended design 80
lower heating plate extendable
space requirement approx. L x W x H 3060 x 1400 x 1120 mm
weight approx. 2100 kg
further technical data on request
The information was taken from a brochure:
All data without guarantee
5
Toner, Laser Jet 2100, Canon EP-32
R0buf89yy
-Order Code: 57210PB
-Replaces: C4096A
-Complete price
-Weight: 4 kg
3
Manufacturer, Model:HP Indigo 12000 HD | NEW
Authorized Colours: 7
First Installed: 2018 / never in use
MFD: 2018
Impression: Zero Counter
Reference Number: 61
Printing Speed: 3450 sheets per hour 4/0
Image Quality: 1625 dpi (virtual 4876 x 4876 dpi)
Line Screen: upt to 200 lpi
Printable Area: 740 x 510 mm
Paper Format: 750 x 530 mm
Paper Weight: 70- 400 g/qm
Mxvxw0
Paper Feeding System: 2 Trays
Auto Duplex: Yes
HP Indigo 12000 HD, 7 Colors authorized, machine is unboxed and was never in use, Z...
Manufacturer: Leadermac
Year of manufacture: 2006
Speed: 90 m/min
Planing line Leadermac 6 head, complete with all electric and control system.
- 4-chain rail conveyor
- Tilt hoist
- Spacer belt conveyor
- Spacer collector conveyor
- Board separator
- Infeed conveyor
- Planer Leadermac LMC-623SP 2006, 6 heads
- Output conveyor
Qqmat
- Chain conveyor separating with end saw
- Board stacker
- Roller conveyor for ready board packages
- Dropping the waste board
- Belt conveyor
- Board pocket for wa...
5
I have a shelf press for sale .
Dimensions of the shelf - 110 x 220 cm
Shelves are not heated .
Press in working order used occasionally in our company, about 2-3 years ago were replaced sealers on the cylinders .
The price is net price - we issue f.vat.
Ready for pickup - loading included in the price.
Ce30azvwea
If you have any questions, please contact me - thank you!
Digitaldruckmaschine - Digital Printing Machine HP Indigo 3550 Year 2011 - Serial-No. 3550 Printing speed 68 4-color 8.5 x 11 in images per minute (two-up); 136 2-color and 8.5 x 11 in images per minute (two-up)
Image resolution 812 dpi at 8 bit, 812 x 1624 dpi in High Definition Imaging
Line screens 144, 160, 175, 180, 230 lpi
Paper format 13 x 19 in maximum
Image format 12.12 x 17.7 in
Paper weight* Coated: 55 lb text - 130 lb; Uncoated: 40 lb text - 120 lb; Thickness: 3...
