Veneer press

Ott

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, sliding unit metal roller, sliding unit with shoe metal output roller, sliding – from below: traction belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11 kW with pneumatic brake operating pressure 6-8 bar diameter of the extraction nozzle 2x150 mm overall dimensions L/W/H 1960x1700x2000 mm weight approx. 2000 kg – manufactured in Germany – 2 units – unpainted Crodpfx Aezty Rtoqtsh – used sanding machine, very good condition Net price: 31900 PLN Net price: 7420 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7976 Csdpoztw H Esfx Aqterh TECHNICAL DATA - max. width of workpiece: 1100mm - max. height of workpiece: 160mm 2 processing units: 1) grooved rubber roller for calibration 2) pneumatic shoe + 2 metal rollers – from above: - 2 metal rollers, sliding - pressure roller - processing unit - 2 metal rollers, sliding - processing unit - 2 metal rollers, sliding - cleaning brush – from below: - 2 rubber rollers, sliding - conveyor belt - pneumatic belt oscillation controlled by photoelectric sensors - electric table lifting - 2 types of feed speed - working pressure 8-10 bar - diameter of dust extraction nozzle 2x200mm - total power 30kW - overall dimensions (length/width/height) 2230x2020x2050mm - weight approximately 3000kg ADVANTAGES – made in Germany – 2 processing units – used machine, very good condition Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1980, Press dimensions: 2500 x 1300 mm Storage location: Nattheim Crsdpsz Ink Ujfx Aqtsh

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Crodpfevvkfqox Aqtsh

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm Csdpfx Ajx Uru Neqtorh stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No serial production. Crjdpfozvqclex Aqteh Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Cable cross-section: 5×6 mm² If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS Credpfx Aov I Sayoqtjh TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: as good as new (ex-display), Year of construction: 2026, OTT Pacific+ with special paint finish Equipment: Riepe transmission Gluing, laminating (PUR/EVA), pressure zone, edge trimming for increased edge overhang Capping with 2 motors, flush trimming at the top/bottom, radius trimming R2, corner copying AKF fully equipped with optional multi-tool, NC radius draw blade R2/R1, surface draw blades 2-point, RS special unit with Riepe spray nozzles. Crjdoz D Uwmepfx Aqtjh Suitable for solid wood up to 15mm thick Feed rate from the roll: 18 m/min, including profile milling Machine weight approx. 3000 kg Return possible.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: S/70032, grinding width: 1,360 mm, power: 49 kW (66.62 HP), height adjustment type: electric, The refurbished automatic wide-belt sanding machine is designed for calibrating and final sanding of solid wood. This model belongs to the higher range of automatic wide-belt sanding machines, characterized by an exceptionally rigid frame, top-quality sanding performance, and versatile applications. Main components: Crodsz D Ufdepfx Aqteh 1. Steel roller – 15 kW 2. Hard rubber roller – 15 kW 3. Mechanically adjustable platen – 11 kW + Brushing/cleaning unit at the outlet (without tooling). Sanding width 1360 mm Working thickness 3 – 160 mm Motorized adjustment of working thickness with LCD display Automatic centering of the feed belt Total maximum power consumption 49.8 kW Conveyor in good condition CE safety standard Weight approx. 4000 kg

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Crsdpfjz Dxkdex Aqteh Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.