Used tool milling machines - NC/CNC 700-999mm X-axis travel for sale (18)

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm Helhccoud Illeqmenr z-travel / mm Control TNC 355C

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Hnelhccewm Rrwjqmsr Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON Holjup Hw Eehccqmsnr - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 155 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW Holjzip Hiohccqmenr weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,20 x 2,30 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Y-travel 406 mm Holhotud Uteccqmenr Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Condition: good (used), machine/vehicle number: 85382, UNIVERSAL MACHINING CENTER MAHO MH 800 C, series: 85382 X axis stroke 800 mm Y axis stroke 500 mm Z axis stroke 600 mm Work table dimensions: 900x625 mm Maximum weight allowed on the table: 600 kg Spindle rotation speed: from 20 to 5.000 rpm, 15 kW Tool taper: ISO 40 cone Tool shop with 30 positions MAHO numerical command Machine dimensions: 3,350mm x 2,520mm X 2,500mm; Car weight: 6,200 kg Good technical condition Price EURO 7.000 + VAT Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Hslsldgf Hjhccqmsnr Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, input voltage: 380 V, We are offering this defective Klopp UW5 CNC tool milling machine, manufactured in 1990, for sale. The spindle of the Z-axis is defective. It was inspected by a technician approximately 5 years ago, and it was determined that a repair would no longer be economically viable. Otherwise, the milling machine was functional. It is explicitly offered as a source of spare parts. The milling machine can be inspected, but it is no longer connected to the power supply. Collection must be arranged by the customer; a 10-ton overhead crane is available. Model designation: UW5/TNC355 Year of manufacture: 5/90 Serial number: 5309 Connection voltage: 380 V Frequency: 50 Hz Rated current: 43 A Fuse rating: 50 A Control voltage: 220 V Hslhccjzh Taksqmonr Auxiliary voltage: 24 VDC Wiring diagram: 0552 828 If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Hnjlhoxg Rxboccqmer

Year of construction: 2000, condition: ready for operation (used), SELCA S 3045PD Numerical Control Hslhcsgiyltocqmsnr Dual head. Table dimensions: 1400 x 360 mm. Longitudinal axis travel: 1100 mm. Transverse axis travel: 350 mm. Vertical axis travel: 500 mm. Operation and maintenance manual included.

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm Hnelhccetqqpljqmjr z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 600 mm Hnjlhcstqqtbecqmer z-travel 500 mm NC-rotary table 630 mm spindle taper SK 40 spindle turning speed range 18 - 6300 U/min control DIALOG 4 feed 2 - 3600 mm/min rapid traverse 6 m/min table load max. 485 kg quill stroke 80 mm spindle drive 9,5 kW total power requirement 20 kVA weight of the machine ca. 4,6 t dimensions 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Hnolhezcmz Esccqmer Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm

Condition: used, Year of construction: 1985, machine/vehicle number: 31268, x-travel:850 mm y-travel:700 mm z-travel:600 mm quill stroke:115 mm table surface area:900x700 mm spindle turning speed range:30-6000 U/min spindle taper:SK 50 control:Sinumerik 3 M feed speeds:0-6000 mm/min spindle motor:7,5 kW total power requirement:32 kW weight of the machine ca.:6,6 t dimensions of the machine ca.:3,8 x 1,8 x 2,9 m The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Rotary Work Table - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 7.5 kw Motor for Main Spindle. Helhcscxxwgscqmjnr - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Year of construction: 1988, condition: used, machine/vehicle number: 82053, table mounting size: 600 x 1100 mm movement x: 800 mm movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand ca. 50 mm spindle turning speed range: 63 - 3150 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x/y/z 4,5/2,6/3 m/min electrical connection: 380 V, 5,5 kW Hnjlhcoxnp Djcqmor space needed: 3000 x 2500 x 2030 mm weight: ca. 4000 kg control 432 with graphic

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar Helhccex Uz Apoqmonr mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: repair required (used), Year of construction: 1990, functionality: limited functionality, machine/vehicle number: 5337, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 7 m/min, table length: 600 mm, table width: 1,400 mm, type of input current: three-phase, total height: 2,400 mm, total length: 4,000 mm, total width: 3,800 mm, overall weight: 4,500 kg, Equipment: documentation/manual, For sale is this used UW5-CNC milling machine from Klopp Korradi. Holhccqoymdhwemenr Year of manufacture: 1990 Cosmetically in condition appropriate to its age The machine has not been operated at our facility in recent years One axis occasionally generates errors; due to lack of expertise to fix this, it was simply no longer used Equipped with a Heidenhain TNC 355 control system Manuals, instructions, and spare parts lists are available Tool holder: Available tooling can be purchased for an additional charge Inspection possible by appointment

Condition: good (used), Year of construction: 1993, Tool holder SK40, speed range 20-4000 rpm, clamping area 1,100 x 600 mm. Helhccolcbggjqmsnr

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 140014, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, spindle mount: MK 4, table length: 1,270 mm, table width: 305 mm, total height: 2,390 mm, total length: 2,170 mm, total width: 2,510 mm, overall weight: 2,500 kg, workpiece weight (max.): 200 kg, controller model: Siemens 828 D, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine, model V 760 L by MMD. The machine has been in single-shift operation since 2014 and shows normal signs of use. However, it is fully functional and continues to work precisely and reliably. Technical specifications: Control: Siemens 828 D Automatic tool changer 3D probe included Automatic tool measurement The machine is powered on and can be inspected under operation at any time. Helhccqoxnnb Nsmenr Condition: Used, well-maintained, technically flawless. Regularly serviced, immediately ready for use. Year of manufacture: 2014 Operation: Single-shift operation Inspection and test run possible by appointment.