Used Valtra/Valmet 700 for sale (5,972)

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 Lrodpjxx Tbpefx Adcju • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return • Suitable for high-pressure washing • CE compliant

Condition: good (used), Year of construction: 2019, functionality: fully functional, Valmet RoboCoiler for automatic de-wiring of bales. There are 2 units. Each unit consist of a turntable, metal detection, cutting and spooling unit. CHARACTERISTICS ▪ Max. 140 balen/hr Lredszy Nlajpfx Adcou ▪ Bale length: 700 – 1000mm ▪ Bale width: 580 – 900mm ▪ Bale height: 350 – 650mm ▪ Bale weight: max. 333kg ▪ Wire diameter: 1.8 – 3.0mm ▪ Strength: 500 – 1250 N/mm2

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day Ledpfxsz Hvmhs Adceru - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 313 h, power: 114 kW (155.00 HP), fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, next inspection (TÜV): 07/2029, color: green, overall weight: 6,500 kg, front tire size: 540/65R28, rear tire size: 650/65R38, motor manufacturer: AGCO Power, gearing type: mechanical, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Valtra N155 Forestry – Top-spec – 50 km/h – Front PTO – Olive Green Metallic For sale is a very well-maintained Valtra N155 forestry tractor in the exclusive olive green metallic paint finish. The tractor impresses with its extensive equipment and is ideally suited for both forestry and agricultural applications. Technical data: Manufacturer: Valtra Model: N155 Forestry First registration: 2024 Power: approx. 114 kW / 155 hp Fuel: Diesel Emission stage: Stage V Transmission: DPS Power Shuttle 30/30 Maximum speed: 50 km/h Total weight: 6,500 kg Lsdjzi Erbjpfx Adcjru Next §57a/TÜV inspection: 07/2029 Tires: Front: 540/65 R28 Alliance Forest Rear: 650/65 R38 Alliance Forest Equipment: Cab with automatic climate control and footwell heater Front hydraulics and front PTO Rear linkage HD 4 hydraulic rear control valves Power Beyond 2 hydraulic front control valves Automatic trailer hitch (38 mm pin) Premium work lights 2 yellow rotating beacons Forestry equipment Roof-mounted work light and extensive lighting system The tractor is in very good condition and is ready for immediate use. Viewings are possible at any time by appointment.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 201269, total width: 1,150 mm, total height: 1,650 mm, total length: 900 mm, working width: 700 mm, input voltage: 230 V, type of input current: three-phase, overall weight: 170 kg, power: 0.75 kW (1.02 HP), passage height: 100 mm, height adjustment type: mechanical, working height: 850 mm, roll width: 700 mm, input frequency: 50 Hz, input current: 16 A, Equipment: CE marking, The used roller coating machine for adhesive is designed for applying adhesives such as glue to various surfaces, including veneer, aluminum veneer, and other materials used in the furniture, parquet, and woodworking industries. The machine is also suitable for materials such as plastic, cardboard, textiles, wood, and more. The adhesive roller coating machine uses an adjustable adhesive reservoir for even and precise adhesive distribution. The speed of the adhesive roller and the transport roller can be adjusted using a frequency controller. The machine can operate at speeds ranging from 5 to 50 m/min. The feed height can also be adjusted using a handwheel. The machine is fully functional and has been inspected in our workshop. Lrjdpfx Ade Aayrneceu

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Lrodpfozxrd Aex Adceu

Condition: good (used), functionality: fully functional, Valmet Sunds pulp dewatering press / bleaching press * Roll diameter: 900 mm * Roll length: 2820 mm * Roll speed: 2 - 15 revolutions/min * Roll gap: 3 - 13 mm Lrjdpfjz Hc A Aox Adcsu

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following piece of equipment for sale: Keyence VL-700 coordinate measuring machine. The machine is being sold with the equipment shown in the photographs and specified in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! This equipment originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. Lrsdpfjz Sxq Uex Adceu This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10.00 on 3 November 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Ledpfsyi H Eqox Adcsru Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: used, Year of construction: 1996, functionality: fully functional, Max. roll diameter: 1,300 mm Lrjdpfxoz It D Ho Adcou Roll core: 76 / 100 / 152 mm (unwinding), only 152 mm (rewinding) 2 rotogravure stations + inline adhesive coating unit Drying: diathermic oil system, vertical + horizontal tunnels Cooling rollers after each station Control: Siemens S5, DC drives Processes: barrier coating, lamination (paper + aluminum/plastic), inline primer CE certified, incl. thermal oxidizer (RTO25) and steam generator (Ferroli)

Condition: used, Year of construction: 2015, operating hours: 4,108 h, power: 151 kW (205.30 HP), Equipment: air conditioning, all wheel drive, cabin,

Condition: used, Year of construction: 2015, front tire size: 650/60R34, Equipment: compressed air brake, Rear wheel weights Lower links Cat 3/3 Quick Steer Valtra Evolution / seat 2x sockets 12 V Tires 4x NEW front Mitas 650/60 R34 / Lrjdpfjr N Apfsx Adcju

Condition: used, Year of construction: 2014, Vertical high-speed machining center Manufacturer: DMG Mori Type: MILL TAP 700 Year of manufacture: 2014 Control system: Siemens 840D SL Travel distances X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool magazine: 15 positions Weight approx.: 4,100 kg Lrsdpfx Ajz I Inmodcsu Automation with robot Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Robot: Fanuc 191026

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Lrjdpfjvptbuex Adcsu Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Lredpfx Adoz Dgzdjcju Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 16,201 h, load capacity: 25,000 kg, lifting height: 6,050 mm, fuel type: diesel, mast type: triplex, construction height: 3,900 mm, motor manufacturer: volvo, fork length: 2,390 mm, fork width: 250 mm, Equipment: cabin, lighting, pallet forks, Brand: Valmet Type: TD031 Drive-through height: 390 cm Lifting height: 605 cm Capacity: 25,000 kg Drive: Diesel Year of manufacture: 1992 Operating hours: 16,201 Lredpowuqpfsfx Adceu 3+4+5 valve (side-shift, hydraulic fork adjustment, hydraulic leveling) Triplex mast Pneumatic tires (front twin tires) Fork length: 239 cm Fork width: 25 cm Forks together, outside: 85 cm Forks apart, outside: 288 cm 6-cylinder Volvo engine Enclosed cabin

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) Lrjdjxmr Rropfx Adceu modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached

Condition: used, Year of construction: 1986, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 395 mm, cutting width (max.): 670 mm, roll diameter: 700 mm, saw band length: 5,150 mm, For sale is a used Panhans BSB700 band saw in a robust industrial design. The machine is ideally suited for precise longitudinal, transverse, and curved cuts in solid wood and wood-based materials. Thanks to Panhans’ solid construction, it is a reliable choice for carpentry shops, joineries, or woodworking workshops. Lrodpfx Asz Rv Izjdcju The machine is in used condition and has been in operation until recently. Inspection and functional testing are possible by arrangement. Sale is without warranty or guarantee due to the age of the machine.

Condition: excellent (used), Year of construction: 1996, Maho MH 700 M Tool milling machine Deckel Maho MH 700 M with Heidenhain TNC 116 control, built in 1996, in SUPER condition. From the testing department of Castwerk Technologies. CE compliant!! Technical data: Year of construction: 1996 Universal table Speed: stepless up to 5000 RPM Feed rate: stepless in 3 axes from 0 to 3000 mm/min Travel ranges X/Y/Z: 700/450/450 mm Rapid traverse rates x/y/z: 5 / 5 / 4 m/min Table surface: 750 x 450 mm Table load: 450 kg Vertical quill stroke: 80 mm Vertical quill and horizontal quill - SK40 Hydraulic clamping system Weight approx. 3400 kg Space requirement approx.: 2.5 x 2 x 3 m Drive power: 12 KVA Accessories and equipment: Ledpez Indnsfx Adcoru Heidenhain TNC 116 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control system and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Deckel Maho MH 700 M with a Heidenhain TNC 116 control. This universal milling machine is in very good original condition. It comes from a company where it was only used to a limited extent for training purposes. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel Maho has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Deckel Maho on site under power. You can find more milling machines from renowned manufacturers on our website.

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Ledpfxozwvv Te Adcoru Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2019, operating hours: 44,087 h, functionality: fully functional, machine/vehicle number: 02620000651, overall weight: 6,360 kg, Equipment: documentation/manual, Gildemeister/DMG Mori CTX 2500/700 CNC Turning Machining Center (2019) – used and operational The machine is operational and in good condition, and is available for any testing. Year: 2019 Lsdpfx Aezxxh Uodcoru Technical details: Serial No.: 02620000651 Driven spindles: Rated speed: 4,000/5,000 rpm Net weight: 6,360 kg Total operating hours: 44,087 h Spindle hours: 27,832 h Cooling unit Chip conveyor Coolant treatment system Control system Manufacturer: DMG Mori Model: Ergoline Tool turret 14 positions For driven tools Condition: very good, operational Ready for immediate delivery The machine runs without any problems. The machine is available at H.B.R. srl – Calolziocorte (LC) – Italy. You can inspect and test the machine with your own staff.

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Lredsz T A I Hjpfx Adcju Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Year of construction: 2014, condition: used, For sale: Multivac T700 tray sealing machine (also known as a tray sealer). This machine is used for precise and hermetic sealing of trays with film in large-scale packaging processes. Series 182182, Germany. 400/230V; 50 Hz. Includes 2 dies with dimensions of 280 x 200 mm. Documentation is available. Net price: 24,000 EUR. Price negotiable. Ljdsz Sqr Rspfx Adcsru

Condition: good (used), Year of construction: 2019, Rollfix 700 automatic rolling machine - used - year of manufacture 2019 - computer control with touchscreen - automatic flour dispenser - automatic dough rolling - production machine - inspected and cleaned - stainless steel construction and housings - collection from warehouse / transport option available Ledoz Hv U Ejpfx Adcjru - price on request

Condition: excellent (used), Year of construction: 2019, operating hours: 8,255 h, functionality: fully functional, We are offering a system consisting of two ZK Genius 700 wire EDM machines, complete with the associated Chameleon Quad automation system. Due to changes in our product portfolio, these machines are no longer required for our wire EDM capacity. The complete system is in very good used condition. 1x ZK Genius 700, manufactured in 2015, with 22,056 operating hours 1x ZK Genius 700, manufactured in 2019, with 8,255 operating hours • Travel range: 400 x 350 x 350 mm • Table: 575 x 500 mm • Workpiece weight: 700 kg • 96 Ampere generator capacity • Controlled C-axis and rotating spindle • CO/2 fire extinguishing system from Kraft & Bauer and extraction system • C-module for hard metal, PCD, or etching applications • O-module for very fine surface roughness • CIMCO editor for path-controlled wire EDM 1x Chameleon Quad, manufactured in 2015 • 176 electrode positions • 9 UPC pallet positions with loading drawer Ljdjzwt Eropfx Adceru • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets