Year of construction: 2012, condition: used, Technical details: total power requirement: 413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Gbsdpfsw Dufvex Ah Aei Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30 *

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPZ-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Gjdpfx Ahjfzkzhj Aebi Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: new, Year of construction: 2026, 🏭 POWDER COATING BOOTH KPP Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Godpjfy T Tbefx Ah Asbi Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: new, Year of construction: 2020, 🏭 POWDER COATING BOOTH KPO-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Godeflk Akepfx Ah Asbi Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: width: 430cm Godpfxjvu Hvpe Ah Ajbi length: 330cm height: 300cm weight: ca 4800kg

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Gbjdoyddufjpfx Ah Aji Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: Godpfx Ajqcuvwoh Asbi This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. repeatability. Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Gedjt Din Ajpfx Ah Ajbi Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2000, Tray trolley, paint drying trolley Gbsdpfsb A Hcmsx Ah Aoi -Total length: 1400 mm -Total depth: 960 mm -Total height: 2000 mm -Compartment height: 28 mm -Shelf load capacity: max. 15 kg -Number: 2 cars available -Price: per piece -Weight: 127 kg/piece

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Gsdpfx Ahsyfim As Aobi Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Godpfsyfik Isx Ah Ajbi Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: used, Year of construction: 2011, total height: 3,900 mm, total length: 48,000 mm, total width: 12,000 mm, space requirement length: 48,000 mm, space requirement width: 18,000 mm, Equipment: cabin, SAMES automatic powder coating system The offer includes the following components: 1. Automatic transport system with a travel speed of 1 m/min and a DEMAG elevator 2. Surface preparation components: - Water treatment system - 3 water tanks - Surface preparation tunnel 3. Dryer with RX500 thermoreactors measuring 5.0 m long and 2.4 m high, along with a control unit 4. Painting unit components: - Spray booth - 2 RFV 2000 manipulators - Powder coating mixing center - Control cabinet - 6 powder applicators Gbodswcfppjpfx Ah Aei - PVV recycling kit - Filter unit - Filter press - Tanks for the powder coating mixing center - Fire extinguishing unit - Paint shop control system 5. RX500 thermoreactor oven measuring 9.0 m long and 2.4 m high, along with a control unit

Condition: good (used), Paint roller machine, roller coating machine, powder coating system -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg Gbjdpfsgal Agsx Ah Aji

Condition: good (used), Year of construction: 2000, Sandblasting Cabinet Auer ST 700 Blasting Chamber Width 750 mm Height 700 mm Depth 550 mm Blasting Gun Air Nozzle 3.0 mm Blast Nozzle 6.5 mm CONSUMPTION Compressed Air (4 bar) 0.41 m3/min Power 1.0 kW Gbsdpfx Ahjyayu He Aji

Year of construction: 2020, condition: good (used), Pad printing machine, screen printing machine, rotary printing machine, pad printer -Manufacturer: Eickmeyer, screen printing machine, pad printing machine Gedpfx Ahex Ei Twj Asbi -Type: TIC 121 SC -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm -Operation: with foot pedal -Number: 2x pad printing machines available -Price: per piece -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 9884, overall weight: 500 kg, inner dimension width: 800 mm, inner dimension length: 1,150 mm, inner dimension height: 800 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid requires timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 1,150 x 800 x 800 mm MACHINE DETAILS Electrical data Gbjdpoxqnwpjfx Ah Aoi Power: 850 W Voltage: 230 V Frequency: 50 Hz Maximum air connection: 80 bar Dimensions & weight Dimensions (L x W x H): 1,300 x 1,200 x 1,800 mm Weight: 500 kg

Condition: used, functionality: unexamined, machine/vehicle number: 22113, The Schlick Roto-Jet is an industrial blast cabinet / blasting machine designed for efficient and reliable cleaning and preparation of surfaces of metal and other components using blasting media (such as metal grit, glass beads, ceramics, etc.). This machine is widely used in metalworking, mechanical engineering, construction components, sheet metal industry, and other applications where surface preparation, rust removal, deburring or cleaning is required. The Roto-Jet utilizes multiple blast turbines that deliver powerful, uniform blast streams for effective surface treatment. Gbedsx Srh Depfx Ah Asi

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Gbedsxa H Ewopfx Ah Aoi (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. Gbodpfxowzmcbj Ah Aoi COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: Gbedpfx Ahswzl Hxe Aei In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ Gsdpowfgbrjfx Ah Aobi ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves. Gbjdpfjwdfnzsx Ah Aji

Condition: as good as new (ex-display), Year of construction: 2026, Parts Cleaning Machine / Combination Spray Cleaning System Type L101 HP automatically working hot water parts washer with basket drive by means of gear motor, stainless steel washing pump (Lowara), spray system with stainless steel nozzles additional manual cleaning with high pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting - Basket diameter: 910 mm - useful height: 490 mm - max. loading weight: 200 kg - Spray pressure (washing pump): 2.3 bar Gbjdpod R Ahlofx Ah Asi - spraying pressure (HD pump): adjustable up to max. 60 bar - tank volume: 175 litres - Heating: electrically adjustable (RT - 60°C) - plant dimensions (LxWxH): 1.300 x 1.500 x 2.100h mm - empty weight: approx. 200 kg ++washing time clock freely adjustable (minutes and hours) ++complete cleaning machine (interior and exterior cladding) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2.000 micron) ++Operating hours counter ++Steam vapour extraction incl. condensate recirculation ++Omron timer for setting the time in sec./min./hour. Parts washer is as good as new (test plant/technical centre); Year of construction: July/2021 OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. Gsdowt T Uzspfx Ah Aobi - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: used, Year of construction: 1999, 1999 CM System D8 Overhead conveyor (painting chain) for handling chairs or similar products, dyed on hooks. 80 linear meters. Towing group: lightweight Caterpillar engine Working speed: min/max 0:9 m/min Gsdpoxyi Uusfx Ah Aebi Motor power: HP 2 D8 chain development and d. 37 rollers: 80 meters Straight track to measure: 72 meters 90° horizontal bends r= 500 mm: 10 pieces Hook step: 0.80 m Space required for transport: 5 meters free on truck