Used sand blasting equipment for sale (136)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 15639, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Internal dimensions: 700 x 500 x 400 mm MACHINE DETAILS Operating voltage: 220 V Frequency: 50 Hz Iedjyr Rzhspfx Abneap Dimensions & Weight Dimensions (L x W x H): 870 x 770 x 1,600 mm Machine weight: 400 kg External reference: Lot 89

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. Iajdeyr Rirepfx Abnop TECHNICAL DETAILS Internal dimensions (L x W x H): 1,100 mm x 650 mm x 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,200 x 1,600 mm Machine weight: 400 kg External reference: Lot 82

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Ijdpjwikatjfx Abneap Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

Condition: used, Year of construction: 2010, machine/vehicle number: 0901-260005, Kaltenbach Gietart Sprint 1504 continuous blast system with 4 blast turbines. Technical data Kaltenbach Gietart Sprint 1504 Number of turbines: 4 pcs. type C 380 Turbine output: 11 kW Brush and blow-off unit: 1 piece Sheet thickness min: 6 mm Flat material min: 60 x 80 mm Working speed: 0.8 - 1.5 m/min. Throughput speed: 0.6 - 10 m/min Feed-through opening: 1600 x 650 mm (for sheets up to max. 1510 mm wide) Roller conveyor height 640 mm Power supply: 400 V +/- 5 %, 50 Hz, Control voltage: 24 V DC Total connected load: 84 kW Compressed air supply: 7 bar, dry, oil-free, clean, 20 m³/h The blasting system is suitable for blasting: Profiles: max. 1000 x 300 mm Sheet metal: max. 1510 width Flat bars: min. 60 x 8 mm Transport length: min. 2000 mm Transport weight: max. 1000 kg/m - min. 30 kg/piece Iajdpfx Aeymy Hiobnop Material quality: S 235JR*NEN-EN 10025-2 Structure of the Gietart blasting machine: Machine housing, 10 mm thick Manganese lining, 4 mm thick Manganese wear strips, 8 mm thick Inlet sluice 1400 mm, with rubber curtains Outlet sluice 800 mm, with rubber curtains Collecting hopper with screw conveyor Screw conveyor to the bucket elevator

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. Isdpfx Abew Nbyceneap - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. Iaodpfowt T Uzox Abnsp - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: new, Year of construction: 2025, functionality: fully functional, We offer a universal blasting machine with turbines, type - TSMZ 250-20 10/10 Table + hanging blasting equipment Table diameter - 1000 mm Table load - 250 kg Hanging diameter - 800 mm Hanging height - 1000 mm turbines - 2 pcs, diameter 250 mm Turbine power - 3 kW Each turbine is independently controlled Iasdpfx Abowfyuljnsp Elevator power - 0.75 kW Filtration - manual shaking Filter power 1.5 kW, output - 1400 m3/hour Machine dimensions incl. filter - 3200 mm Machine depth - 1800 mm Total machine power - 9.5 kW CE certificate

Condition: ready for operation (used), Hornich ISK 800 SF Sandblasting Cabinet Injector Blast Cabinet Fine Blasting Unit Work Surface: W=740 mm D=480 mm H=360 mm Required Space: W=800 mm D=770 mm H=1480 mm Electrical Power Consumption: 220 V/50Hz, 400 watts Air Consumption: approx. 400 l/min depending on the air nozzle You are welcome to arrange a viewing. We can organize low-cost shipping for you! Ijdpfxjyr Dlaj Abnoap You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The stated company names and trademarks are the property of their respective owners and are used only for identification and product description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, Machine type: Vapormatt Vapormate Manufacturer: Vapormatt The Vapormate is our highly versatile, manual entry-level system. It is a very popular option for users who require a compact unit for smaller workspaces or wish to trial wet blasting technology before investing in a larger system. The Vapormate is equipped with all the features you would expect from one of our larger manual systems. The wet blasting process was invented by Vapormatt in the 1950s. Through over 70 years of development, Vapormatt has created an ergonomic and cost-effective solution: the Vapormate. The integrated water recirculation system ensures efficient use of consumables. Wet blasting provides gentler and more uniform processing compared to, for example, sandblasting, thanks to the water carrier medium. This technique enables you to achieve smooth and consistent surfaces on your components. Further technical information can be found in the attached brochure. The stated price is net, plus the currently valid statutory VAT and shipping costs. The images may depict the system including accessories, which are optionally available at additional cost. The quoted price refers to the base machine only. If you are interested, we look forward to hearing from you. We are happy to provide you with personalised and non-binding advice. The European Commission offers a platform for out-of-court online dispute resolution (OS platform). Iasdpfx Aoyq Ri Nobnep This listing serves solely as an online presentation of our products. Contract negotiations are carried out by means of telecommunications (email, telephone, message portal). Initially, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice (Impressum) and information regarding your right of withdrawal, before any purchase or contract is concluded.

Condition: new, Sandblasting cabin Bernardo SB 4Workspace dimensions: 1110 x 820 x 810 mmAir consumption: 680 l/minRequired air pressure: 8.6 barFunnel capacity: 148 litresArm-hole opening: 180 mmAir connection: 3/8 "Weight approx. 160 kg Iajdpfx Abed Tb Uzjnop

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement Iaodpfeyn Inwox Abnop - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Iodpfjdrtanex Abnoap

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) Iodoynz Idopfx Abneap - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Iedpfx Aoynr E Tjbnjap Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover Iasdpjynr E Hefx Abnop - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) Iaodjynr Emepfx Abnop - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total width: 1,112 mm, total height: 2,391 mm, total length: 1,237 mm, type of input current: three-phase, overall weight: 750 kg, workpiece weight (max.): 30 kg, input voltage: 400 V, space requirement width: 2,700 mm, space requirement length: 2,000 mm, power: 3 kW (4.08 HP), Equipment: cabin, documentation/manual, lighting, We are selling our mint condition BMF TWISTER blasting machine (demonstration model), built in 2025. The machine operates fully automatically and without compressed air. The workpieces rotate in a cloud of blasting media and are thus blasted on all sides. The desired settings (e.g. blasting time, speed of the blast wheel) are simply entered via a touch panel. The entries can be saved as recipes and reused later. No skilled personnel required. Ijdpfeym T Ugex Abnjap Quick workpiece change system, up to 100 workpieces per blasting cycle. Many commercially available blasting medias can be used, e.g. stainless steel, glass or ceramics. The system includes a suitable extraction system. Inspection and test blasting of customer parts are possible at our premises.

Condition: used, Year of construction: 2003, functionality: fully functional, air demand: 60 m³/h, pressure: 6 bar, total width: 1,500 mm, total height: 2,850 mm, total length: 1,600 mm, type of input current: three-phase, overall weight: 900 kg, turntable diameter: 950 mm, Equipment: cabin, documentation/manual, front-end loader, PRICE REDUCED AGAIN!!! MHG Rotary Table Indexing / Sandblasting System "SMG 260" with 6 nozzles and Siemens CNC control. The system comprises three units: the rotary table installation complete with Siemens CNC control; the "Abrasive Recovery System RGWS 510"—cyclone extraction/separation of waste and blasting media for re-use; and a large "Dust Extraction System DUST-EX 3003 4.0kW"—i.e., filter box/filtration cabinet with exhaust air. Year of manufacture: 2003. It was operated only occasionally in my neighborhood until about a year ago. I acquired it because I planned to glass bead blast stainless steel parts for a customer (approx. 100 pieces/day). However, I did not get the order, so the system has been sitting unused since. Isdpfx Aboymn Iusnsap The buyer must arrange collection and transport. On-site assistance is very limited. My forklift is out of service; at least two pallet trucks are required, plus, for example, a 7.5t flatbed truck or box-body truck with tail lift. The heaviest unit, the machine itself, weighs approx. 900kg (approx. 1500x1600x2500mm); the other two components are lighter, each approx. 250kg and each 3000x1500x1500mm, on a long pallet. The system was configured for a customer in Siegen, with a detailed manual/description specific to this configuration available. More photos available on request. If you require an invoice with VAT and EU VAT ID as a company, I can provide this. In that case, 19% VAT will be added to the actual purchase price—which you will, of course, be able to reclaim.

Condition: like new (used), Year of construction: 2000, functionality: fully functional, ROSLER machine, force centrifuge with classification screen, can be seen in good working condition, speed 174 rpm, capacity 60 litres Iajdsxg Dgfepfx Abnsp

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t Iedpsupxd Dofx Abnjap

Condition: new, 0 945 x 605 x 605 mm operating pressure 2,2 - 5,5 bar dimensions 1,0 x 0,61 x 1,65 m Iajdpfxsupw Sms Abnep 1300 x 1000 x 750 cm Air consumption 250 l/min. weight of the machine ca. 0,09 t

Condition: good (used), Year of construction: 2013, Low carbon steel shot LC S-110, size: 0.3 mm Min. workpiece size: 50x80 mm Max. workpiece size: 600x400 mm Number of spray nozzles: 4 pcs Iaodpfx Asyhbkfebnop Spray wheel diameter: 380 mm Grain flow rate: 60-120 kg/min/nozzle Spray material loading: 1500 kg Spray material to be used max. HRC 51 Grain size 0.2–1.4 mm, max. carbon content 0.7%

Condition: good (used), Year of construction: 1988, Equipment: cabin, IEPCO Micropeen Peenmatic 1000 SK with tilting hood including filter tower, blast guns, manual Special features: - Tilting hood, opening angle approx. 70° Isdpfx Abeyk Dm Iensap - Heating system for abrasive drying - Conveyor system for pre-acceleration of abrasives - Pneumatic filter cleaning Working area w x d x h: 800 x 800 x 840 mm Year of manufacture (estimated): 1988 Good, well-maintained condition, operating hours: 600h Overall dimensions (without filter tower): 1800 x 1900 x 2000 mm Weight: 530 kg (blasting unit), 100 kg (filter tower) Sale only to businesses as defined in § 14 BGB.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, power: 3 kW (4.08 HP), Blasting system with carousel; parts are evenly blasted all around. Highly cost-efficient thanks to unique, airless blasting technology for surfaces of the highest quality. New price approx. 65,000 CHF. Operating manual available. Inspection and testing possible. Very good condition. Iedpfx Absykl Sfjneap Type: Twister Machine number: 18/141 Year of manufacture: 2018 Operating voltage: 400 V Frequency: 50 Hz Connected load: 5.0 kVA Weight: 400 kg Maximum power: 3 kW Maximum rotational speed: 9,000 rpm If you have any queries or require further information, please feel free to send us a message or call us.

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Iajdpfx Aslf Hq Nebnsp Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm