6
through-put width: Siehe Text mm
pass through height: Siehe Text mm
Numbers of turbines: 3 Stck.
space requirement approx.:: Höhe ges. ca. 4,5 m
Shotblasting Line for Springs
application area:
- for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain.
- troughput speed of the chain adjustable
plant consists of:
- machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates
- conveyor system
-...
6
0 70 ltr.
motor 1,1 kW / 1500 - 3000 U/min.
internal dimension 498 x 387 x 410 Trog mm
total power requirement 1,1 kW
weight 140 kg
range L-W-H 730 x 650 x 910 mm
Trovalizing and slide grinding machine
** Complete system with accessories
The washing machine-sized trovalizing machine represents
with a capacity of 95 l is a popular one
Compromise between large industrial barrel grinding machines
and sliding machines for small series.
Furnishing :
- trough vibrator cpl.
- with integrated flush...
5
Sputter target, tube, pipe
-Tube dimensions: Outside: Ø 152 mm Inside: Ø 125 mm Total length: 3249 mm
Rl9vzh989
-Number: 2x pipes available
-Price: Complete
-Incl. Transport box
-Dimensions box: 3600/570/H585 mm
-Weight: 306 kg
6
Vibrating Bowl Sweco
Liner in perfect condition
sold without the abrasives
Vt70qh7x
We've set the bar high with the development of three different oven types. A tunnel, cross and deck oven. The three furnace types ensure a solution for every production need and available production area.
The deck oven is optimal where space is limited. In just 9 metres, 45 metres of drying are offered, as the oven is built in 5 floors.
The deck oven is assembled and tested at the factory in Denmark before dispatch, and the deck oven is of course delivered assembled. This gives a short installat...
3
- Hersteller Wagner
- Typ. A 32 E x 2 R
- Baujahr 2000
- Leistung stufenlos regelbar
- Stufen 1 - 5
- mit Temperaturanzeige
- max. Temperatur ca. 80 Grad
- bis max. 250 bar
- Watt 3200
B0r38x7dza
- 13,3 A
- 4 Anschlüsse, 3/8"
12
ABB offer package:
Robotics servo drives with Elmo Motor
Harting connector with pins
Various pressure switches/guards
Bivbok0lwv
Pressure sensor
Board
4 cards
14
Rösler ERS 100 drying system
The aftertreatment of wet workpieces from the mass finishing process is practiced in a wide variety of drying systems.
These are often linked directly to the vibratory finishing machines so that the workpiece is dried automatically.
Rösler ERS 100
Oawdn
Drying system
400 V
32A
Bj 2009
Dimensions:
HxDxB
180 x 120 x 265 cm
Components are missing in the control cabinet (circuit diagram available)
Shipping via forwarding agency possible, please contact us.
More items...
Abrasion Tester, Linear Abraser, Linear Abrasion Tester
Hvmkjb0ga
-Manufacturer: Taber, Linear Raser Model 5700
-Voltage: 110-120V / 220-240V
-Cycles: 2-60 min
-Housing: 1 hinge damaged, see photo
-Dimensions: 430/230 / H510 mm
-Net weight: 8.3 kg
6
The SCITEEX CABILUX PC-CL 443 blasting chamber was built in 2016. The shot blasting machine is offered with a pneumatic shot blasting machine - model BM-SB 200, with a smooth operating pressure control system and a DM-FC 12/15 dust filter, with a capacity of 15,000 m3 per hour. Additionally, the shot blasting chamber is equipped with a control cabinet with BMS software. The shot-blasting machine is made of galvanized steel with phonic insulation.
Technical specifications :
- overall dimensions:...
The tunnel kiln is delivered in modules of 6 meters. Each module consists of 2 zones, each with its own temperature and humidity control, which optimises the drying process. IR technology is available in each zone if you wish.
Inspection windows along the entire length of the oven provide optimal visibility and facilitate the introduction of new parts and varnishes. The operator can follow the product throughout the oven and adjust the temperature of each zone up and down as required. It's easie...
3
Airless and Aircoat
- Producer Wagner
- Typ. Leopard 35-150 icebreaker
- Übersetzung 35:1
- Baujahr 2017
- Wetted parts in stainless steel
- Max. Eingangsdruck 8 bar
- Flow rate, cm³/double hub 150
- Max. Materialdruck 250 bar
- Pneumatische Hochdruckpumpe
B0r9i8r3uz
- Mit Hochdruckfilter
- Ansaugschlauch, flexibel
- Mit Wandhalterung
- Machine number 2017-1179
- Standort: am Lager
4
For sale is a little used drying channel of the brand Hymmen.
Bzhmwcem3w
Year of construction 2008; max. workpiece width 1.300 mm, 400 V, suitable for UV-lacquers and water-soluble lacquers
up to 5 % solvent, materials wood and plastic.
The device is very easy to operate without any programming knowledge.
- Englisch user software and user manual
- CE approved, according to European directives
- External PC with network cable
Fvvcdksr
- Fiber laser 20W (optional: 30W, 50W)
- Wavelength 1064nm
- Marking field size 110x110
- Marking software EZCAD in German / English
- Marking speed 7000mm/second
- manual focusing (focus finder)
- Red light preview (contour or simple)
- Max. Component height approx. 370 mm
- Focusing of the las...
6
Hardness tester according to Vickers
B30n2db9e
Vickers / Knoop / Brinell tester
Test force from 20 gf - 30 Kgf
10
Kärcher parts cleaner
Here we offer a Kärcher parts cleaner.
Manufacturing, maintenance, workshop, metalworking - automatic parts cleaners have many places of application.
The parts cleaners work on the basis of aqueous solutions without solvents.
The top loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm diameter, 310 mm height and 130 kg maximum weight.
The parts are cleaned by three-dimensionally arranged flat jet nozzles using solvent-free,
solvent-free, heated wate...
The trolley is supplied in modules of 6 metres length and each module is 2.5 metres in the direction of travel. Each zone has its own temperature and humidity control. This makes it possible to fully optimise the drying process.
The drying oven has inspection windows along the entire length of the oven. This provides an optimal view and an easier running-in of new workpieces and lacquers. The operator can follow the product throughout the oven and adjust the individual zones up and down in tempe...
1
Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, infeed and oscillation, polishing hood.
Bvp3xzykjv
Technical data:
Polishing wheel: max. Ø 500 mm
spindle diameter: 35 mm
polishing wheel width: max. 100 mm
infeed: 100 mm
oscillation: 50 mm
suction connection: Ø 100 mm
dimensions (LxWxH): 900 x 600 x 1900 mm
Weight: approx. 250 kg
Connected voltage: 3 x 400 V
Connected load: 4 kW
10
Coating of AR layer on wafer
Process tube 1 - Nitride front SiN-ARC
Ozli2
Process tube 2 - passivation back side (stack) SiON
Process tube 3 - precoating
Process tube 4 - AlOx/TMA
130 kW
188 A
3/N 400/230 V, 50 Hz
The mobile marking laser is ideal for laser marking large parts.
With the ca. 2,5 m long fiber optic cable and the removable laser head you can also laser large parts.
- Fiber laser 20W (optional: 30W, 50W)
- CE compliant, according to europ. Directives
- Wavelength 1064nm
- Marking field size 110x110mm
- Marking software EZCAD
Cvujjihc3
- Electrically adjustable Z-axis (working plane setting)
- Welded construction made of sheet steel
- Connection 230V
- Air cooled
- Touch IPC with Windows 1...
The equipment is possible to coating in thin film for metal. Sputtering
It works with vacuum technology.
Mqtxt
Maximum machinable workpiece size: 1000 × 300 mm.
Cabin size: 1900mm x 700mm
10
Here we offer a plasma reat FG 3002 with 1 rotation plasma system.
Plasma system
Bewjpeadrc
Type Model: FG3002
Voltage: 3-400 V/32 A
low/Icu: 0.64 kA/-
Fit: 50 Hz
Type: FG3002
Delivery: (See picture)
(Changes and errors in the technical data, information is reserved!)
We can answer more questions on the phone for you.
6
Dear Sirs,
we offer our Top + XL Blue Rotainer® automatic pickling plant for sale.
The plant was built in 2014 and has been maintained regularly.
The new price of the plant in 2014 was net 376,500 € plus installation / commissioning.
The plant consists of the following components:
12m pickling container incl. nozzle system on:
-walls
02vghbrr
-ceiling
-floor
incl. rail system
12m technical container, arranged on top of the pickling container to save space, accessible via a platform and side acce...
1
Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, infeed and oscillation, polishing hood.
polishing wheel: max. Ø 1.000 mm
spindle diameter: 45 mm
polishing wheel width: max. 150 mm
infeed: 200 mm
oscillation: 50 mm
Suction connection: Ø 160 mm
dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm
Bvp3sodfbd
Weight: approx. 300 kg
Electrical connection: 3 x 400 V, 7,5 kW, IP54
KOLLTRONIC C 450
450W CO2 laser system
Without a workstation
Wavelength 10,600 nm
Mains connection 230 V, 50 HZ;
including water / air cooling
SCANNER, CONTROL
F-Theta lens 160mm
Hsoazs7
2 distance lasers for quick focus finding
With red pilot laser
Industrial PC with
Windows 10 operating system
SSD hard drive
Kontrollic - cards for steering and control
of the scanner and laser
Digital and analog interfaces to
System integration; RS232, Ethernet, USB,
19 "color monitor
keyboard and mouse
SOFT...
Fiber laser 20W (optional: 30W, 50W)
- Wavelength 1064nm
- Marking field size 150x150mm
- optional: rotary axis (3-jaw chuck)
- optional: exhaust system (incl. activated carbon filter)
- marking software EZCAD in German / English
- Pilot laser (simple preview)
- focus finder (simple focus adjustment)
- max. part height approx. 300mm
- electrically adjustable Z-axis, speed adjustable
- Laptop incl. holder with operating system Windows 10
- frame made of aluminum profile
- air cooled
- door width ...
2
Connection value: 0.75 kW Pressure range: 0-10bar
Bfhg8gjzz8
Light tunnel for surface inspection of unpainted and painted car bodies or add-on parts.
There are different LED surface inspection lights to choose from.
Variant 1:
- untreated car bodies / unpainted car bodies
Nugc8evt
- to show dents, dents / bubbles, spots, paint runners and dirt
Variant 2:
- painted bodies
- show dents / bubbles, dents, spots, scratches, paint runners and dirt
Variant 3:
- painted bodies
- to show holograms and polishing defects
- Main application in th...
1
A removable industrial curtain wall or divider can be the perfect solution for creating separate work zones within your facility. Solid walls are costly and don’t allow the flexibility to move equipment, products and machines around if your layout needs changing. Thanks to our selection of high-quality industrial curtain walls and dividers here at Elboy, you can block off specific work zones for certain operations as you see fit and remove them again when you’re done.
It provides clean and comf...
1
Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, direct drive, polishing hood
Iawnnvmfa
polishing wheel: max. Ø 1.000 mm
spindle diameter: 45 mm
polishing wheel width: max. 150 mm
suction connection: mØ 160 mm
dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm
Weight: approx. 300 kg
Electrical connection: 3 x 400 V, 7.5 kW, IP54
KOLLTRONIC C 200R
100W CO2 laser system
Without a workstation
Controller: New
PC: New
CO2 laser tube from SYNRAD: refurbished
Wavelength 10,600 nm
Mains connection 230 V, 50 HZ;
including water / air cooling
SCANNER, CONTROL
F-Theta lens 160mm
2 distance lasers for quick focus finding
With red pilot laser
Industrial PC with
Windows 10 operating system
SSD hard drive
Kontrollic - cards for steering and control
of the scanner and laser
Digital and analog interfaces to
System integration; RS232,...
6
TiOx planar target 2600*100*6 mm with TiOx purity 99.9%
consists of follow:
TiOx tile 162.5*100*6 mm - 16 plates
Cu backing plates:
325*106*6 mm - 6 plates
332*106*6 mm - 2 plates
Bfvwt3f8jz
In Total we have 8 x TiOx planar targets of length 2600 mm or 64 TiOx planar sputtered plates 325 - 332 mm.
1
For sale is a compact, versatile, high-performance ultra-short pulse laser with an integrated frequency doubling option (SHG) in one-box design (“Spirit” model series from MKS / Newport / Spectra-Physics). The turn-key system is pre-calibrated, optimized and tested for operation at all basic repetition rates of 200 kHz, 300 kHz, 400 kHz and 500 kHz.
This femtosecond laser is a direct diode-pumped, monolithic, ytterbium-based amplifier system (DPSSL) with a built-in power attenuator and a pulse p...
3
Mobile workstation for surface inspection of components with matt or glossy surface function: -Auditing of matt surfaces with up to 4,000Lux e.g. leather -Auditing of reflective surfaces with 1,500Lux e.g. painted parts, glossy plastic partsShowing surface defects e.g. dents, scratches, colour inclusions etc.-Auditing of matt surfaces with up to 4,000Lux e.g. leather -Auditing of reflective surfaces with 1,500Lux e.g. painted parts, glossy plastic partsShow surface defects e.g. dents, scratches,...
ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual.The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out. The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filter...
1
machine for polishing wheels with diameter 1.000 mm x 150 mm width
with 7,5 kW drive power, infeed, polishing hood
polishing wheel: max. Ø 1.000 mm
spindle diameter: 45 mm
polishing wheel width: max. 150 mm
infeed: 200 mm
Suction connection: Ø 160 mm
dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm
Weight: approx. 300 kg
Bvp3pyism0
Electrical connection: 3 x 400 V, 7,5 kW, IP54
KOLLTRONIC C 200 R
100W CO2 laser system
Workstation: New
Controller: New
PC: New
CO2 laser tube from SYNRAD: refurbished
Wavelength 10,600 nm
Mains connection 230 V, 50 Hz;
including water / air cooling
SCANNER, CONTROL
F-theta lens 160mm
2 distance lasers for quick focus finding
With red pilot laser
Industrial PC with
Windows 10 operating system
SSD hard drive
Control IC cards for control and monitoring
of the scanner and laser
Digital and analog interfaces to
System integration; RS232, Eth...
8
Laboratory Multi-sources 1 - sided vertical PVD coating machine.
1. Number of vacuum chambers: 4
2. Dimensions LxBxH = 5.9 x 3.7x 3.2 m, weight ~ 8 tonn
3. Water consumption up to 50 l/min, gas ( Argon, Oxygen, Nitrogen) depending on the required process, air ~ 6bar, power parameters Imax 250Amp, Pmax - 100 kW.
4. Substrate type, size - glass, acrylic; size - 600 x 600 mm.
5. Tact time for 1 cycle ~ 12 minutes with transport carrier drive speed 1m/min.
6. Set of magnetrons:
- AC rotary dual magn...
6
Dimensions: 3510 x 2820 x 5520 mm
Bg7lxqj0eh
Color Matching Booth (CMK)
Color matching booth
Function
The booth is used for surface inspection and color matching of painted surfaces on complete vehicles.
The construction as a modular system allows a customer-specific configuration of the booth.
Technical Information
Main dimensions:
Cabin size: approx. 6.3 x 5.3 x 3.4 m [L x W x H; variable in length].
Footprint: approx. 7 x 6 m
Height: approx. 3,7 m
Electrical characteristics:
Mains: 3/N/PE/400V/50Hz
Control voltage: 24V DC
Power: 42 kW
...
6
Automation
Use of one photocell
Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme
Array of guns Vertical
8pcs. pistols
Control - profiControl 10 "
Cyclone - CK-D1250
Dust collector - OZ-8H
Center - RP-01 + SV-200
MA1-23 x 2 pcs manipulator
O...
1
Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, infeed, polishing hood.
Technical data:
Polishing wheel: max. Ø 500 mm
spindle diameter: 35 mm
polishing wheel width: max. 100 mm
infeed: 100 mm
suction connection: Ø 100 mm
dimensions (LxWxH): 900 x 600 x 1900 mm
Weight: approx. 250 kg
Connected voltage: 3 x 400 V
Connected load: 4 kW
Pevzp
KOLLTRONIC C 200R
200W CO2 laser system
Without a workstation
Controller: New
PC: New
CO2 laser tube from SYNRAD: refurbished
Wavelength 10,600 nm
Mains connection 230 V, 50 HZ;
including water / air cooling
SCANNER, CONTROL
F-Theta lens 160mm
2 distance lasers for quick focus finding
With red pilot laser
Industrial PC with
Windows 10 operating system
SSD hard drive
Kontrollic - cards for steering and control
of the scanner and laser
Digital and analog interfaces to
System integration; RS232,...
2
External dimensions: W x H x L: ca. 1500 x 2100 x 900 mm
Oxmtrr3x
Mobile light stand for surface inspection
There are different LED surface inspection lights to choose from.
Application: for displaying dents, bubbles, pimples, scratches, paint runners and dirt.
technical data:
1. mobile with 4 swivel castors + locks
2. light frame manually height adjustable 550mm
3. light frame 90° tiltable
4. LED surface control lights 15° tiltable
5. luminaire control: ON/OFF and dimming
6. mains connection 230V, 50Hz with autom. cable drum, 8m rubber cable + Schuko plug
7. ...
1
Machine for polishing wheels with diameter 500 mm x 100 mm width
with 4 kW drive power, direct drive, polishing hood
Gxnl7g
Technical data:
Polishing wheel: max. Ø 500 mm
spindle diameter: 35 mm
polishing wheel width: max. 100 mm
suction connection: Ø 100 mm
dimensions (LxWxH): 900 x 600 x 1900 mm
weight: approx. 250 kg
Connected voltage: 3 x 400 V
Connected load: 4 kW
KOLLTRONIC C 200 R
200W CO2 laser system
Workstation: New
Controller: New
PC: New
CO2 laser tube from SYNRAD: refurbished
Wavelength 10,600 nm
Mains connection 230 V, 50 Hz;
Bjfgz0p3ku
including water / air cooling
SCANNER, CONTROL
F-theta lens 160mm
2 distance lasers for quick focus finding
With red pilot laser
Industrial PC with
Windows 10 operating system
SSD hard drive
Control IC cards for control and monitoring
of the scanner and laser
Digital and analog interfaces to
System integration;...
4
Light tunnel for surface inspection
Manufacturing according to customer specific requirements, e.g.
main dimensions: L6m x W5,5m x H3,5m
Electrics: semi-automatic control for displaying different light scenes and with dimming function or
manual control ON/OFF with dimming function
1 cycle = 5 rings x 5 LED surface control lights
There are different LED surface control lights to choose from.
Variant 1:
- unfinished car bodies / unpainted car bodies
- show dents, dings / bubbles, spots, paint runn...
5
Good day,
we offer a used pipe - brushing machine of the manufacturer ROLOS S.a.r.l..
Type: SO 9374
Year of manufacture: 2001
Electrical voltage: 400 V
Gk3s3njtq
If you have any questions, you can contact us by phone, as well as by e-mail.
2
Mobile light tunnel for surface inspection of unpainted and painted car bodies and add-on parts.
There are different LED surface inspection lights to choose from.
Variant 1:
- untreated car bodies / unpainted car bodies
- to show dents, dents / bubbles, spots, paint runners and dirt
Variant 2:
- painted bodies
- show dents / bubbles, dents, spots, scratches, paint runners and dirt
Variant 3:
- painted bodies
- to show holograms and polishing defects
- Main application in the...
