Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for later reassembly. Technical data and equipment: Codpfxoz Ikyrj Aa Tjhc • Large-area filtered supply air ceiling panel, approx. 8,100 × 4,500 mm • Filter ceiling divided into two sections across the width • Large-area floor extraction, approx. 8,100 × 3,650 mm with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating / hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / switchgear cabinet • Cabin lighting • Sale includes the system as it is currently installed Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work, up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary skilled personnel, as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical data has been compiled based on existing documentation, nameplates, and the current condition of the system. Information is provided without guarantee. The condition and scope determined during inspection shall be binding.

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Codpfx Aoz H Rfxea Tohc Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Technical data according to the manufacturer: Working container volume: 11 l Usable volume: 7 l Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Operating voltage: 400 V, 50 Hz Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee. Codpfx Aaez D Ifqe Tjhc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, We offer a continuous jet dyeing machine with a roller track – GIETART GW 1500-415. Manufactured in 2005. Csdpfx Aez Ebtkoa Tehc Number of turbines: 4. Power consumption per turbine: 11 kW. Width of the dyeing chamber: 1500 mm. Height of the dyeing chamber: 415 mm. Roller tracks with electric drive: 11.5 m + 11.5 m. Sweeping brush: 1500 mm. Total power consumption of the machine: 65 kW. Complete documentation, including electrical diagrams, is included with the machine.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Csdpfx Ajzwqyyja Tshc Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. Chsdszn Ixnspfx Aa Tec - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. It features one turbine with a power input of 7.5 kW. The machine is in excellent condition, fully functional, and can be tested in operation. Codpfx Aaez Dfuvj Tshc

Condition: used, Year of construction: 2003, functionality: fully functional, SCHLICK Continuous Sandblasting System – fully functional – immediately available For sale is a fully functional SCHLICK continuous sandblasting system, manufactured in 2003. Equipment: - Throwing wheel / impeller wheel - Pressure tank - Automatic abrasive filter system - Automatic abrasive conveying system - Extraction system - Electronically controlled impeller wheels - Complete system in operational condition Chjdpfjzbzwxex Aa Toc Manufacturer: SCHLICK Year of manufacture: 2003 Factory number: 24/23717 Location: Wollerau, Switzerland Availability: immediate The system operates very well and can be inspected and demonstrated upon agreement. Upon request, we can also arrange for cost-effective dismantling and re-installation within Switzerland. Selling price: €6,900 net plus VAT. Short-term collection is possible. If you are seriously interested, please contact us directly.

Year of construction: 2007, condition: like new (used), functionality: fully functional, Tape Machine Has been a part of an Elumatic production line and purchased directly from Elumatic. Manufacturer: Ruscher Model: RU-FE Year: 2007 Information Tape-applying machine with roller conveyors, total length 11 meters. Suitable for facade profiles and many other types of profiles that need to be coated with protective film tape. Csdpfxsxyyc Aj Aa Tohc Dimensions Length: 11,000 mm Width: 800 mm Height: 1,400 mm Seller’s Comments Fully functional Used in a production line for aluminum profiles Can be separated for transport

Condition: used, Year of construction: 2013, operating hours: 1,680 h, functionality: limited functionality, air demand: 6.8 m³/h, pressure: 7 bar, total width: 4,800 mm, total height: 5,000 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 5,100 kg, input current: 63 A, input voltage: 380 V, Equipment: cabin, lighting, Professional industrial Vapormatt Leopard wet blasting machine in good working condition. The machine is fully equipped and comes from a professional production environment. Reason for sale: Due to a change in cleaning methods, this machine was taken out of service 2 to 3 years ago. The machine has not been used since. The machine functioned properly. This machine, which we purchased new in 2013, has always been kept in a clean and heated room. The machine must be sold due to lack of space. The machine is sold in its current condition. Technical description: Suitable for high-quality surface treatment, cleaning, and finishing of metal components in various industries, including: * aerospace * overhaul * precision engineering * metalworking * tooling and machine construction Specifications: * Brand: Vapormatt * Type: Leopard * Year of construction: 2013 * Power supply: 380V * Phases: 3-phase * Frequency: 50 Hz * Connected load: 63A * Machine is fully operational * Includes integrated filtration/water treatment unit Cjdpfx Aaezl Slae Tjhc * PLC/HMI control system available * Complete installation Delivery: * Transportation and dismantling can be arranged, preferably with the buyer taking responsibility. (Incoterms to be agreed) * Forklift/loading options are available and can be discussed. Feel free to contact us or visit us to inspect the machine and discuss the possibilities.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. Codpfsz Azx Rjx Aa Tehc The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Chsdpfx Ajzi D T Doa Tsc Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, total length: 40,000 mm, total width: 6,000 mm, Equipment: documentation/manual, Automated nickel–chrome electroplating line for sale in Türkiye. The line was completely refurbished in 2025 and was operational before dismantling. All equipment is now dismantled and ready for loading. The line has a reported coating surface area of 400–450 dm², a maximum rack load of 1,000 kg and a production capacity of 8,000 dm² per hour. Its installed footprint is 40 × 6 m (240 m²), with reported electricity consumption of 80 kWh per operating hour. Csdpfx Aez Ei Ngea Tohc The sale includes process tanks, filters, rectifiers, a hot-water boiler, a purified-water system and dosing pumps. The equipment list includes six 1,300 A nickel rectifiers, two 4,500 A chrome rectifiers and one 3,000 A rectifier for electrolytic degreasing. The buyer is responsible for transport and commissioning. A detailed equipment list and presentation are available upon request.

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. Chjdpfsz D Tb Rsx Aa Tsc - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, pump ratio 30:1, IS, AA, from our demonstration stock. Manufacturer: Graco Model: PROMIX 2KE, pump ratio 30:1, IS, AA Item No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. A great opportunity to acquire a proven, little-used Graco system at attractive conditions. Notes on the sale: Sale exclusively to business customers. No sale to private individuals. Chodpfx Aszwk H Hoa Tjc Sale and delivery exclusively within the EU – no sale to non-EU countries. Delivery conditions and shipping costs are determined individually and by agreement. The sale is made with the exclusion of any warranty. If you have any questions, we will be happy to assist you.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Year of manufacture: 2019. Chamber dimensions: 1200 x 1850 mm. Cjdpsz Dfzcofx Aa Tshc The equipment has 3 turbines.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is a Rösler rotary vibrator, model R 780 Euro. Key data: Manufacturer: Rösler Oberflächentechnik GmbH Type: Rotary vibrator R 780 Euro Working bowl width: 440 mm Outer diameter max.: 1,805 mm Extended container length: 4,100 mm Pneumatic actuation of separating flaps with hand lever valve. Chedpfx Asz Ehgdea Tec

Condition: used, functionality: fully functional, 2x Sulzer Unicoat Powder Coating Systems Csdpfxez Hc Tho Aa Tehc Please view all the sale related information on AllSurplus.

Condition: excellent (used), Year of construction: 2022, Matt HV 1216 suspended shot blasting machine. Two 11kW turbines. In very good condition, lightly used. Cjdpfsztkzijx Aa Tohc

Year of construction: 2012, condition: used, functionality: fully functional, OKAMOTO - ACC 64CA- Codjzxri Sopfx Aa Tehc 10 X: 800 mm, Y: 440 mm, Z: 522 mm

Condition: used, Year of construction: 2008, functionality: unexamined, power: 25 kW (33.99 HP), type of input current: three-phase, temperature: 200 °C, total length: 1,630 mm, total width: 1,700 mm, total height: 2,950 mm, overall weight: 1,650 kg, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We offer a used Nabertherm N 150/03 CDB, manufactured in 2008. This is a furnace for the catalytic removal of adhesive residue from parts coated using the metal or ceramic powder injection method. The binder contained in the load undergoes chemical decomposition using nitric acid and is removed in the form of a gas. Model: N 150/03 CDB Serial number: 199905 Year of manufacture: 2008 Maximum temperature: 200 °C Rated voltage: 400 V 3/N/PE ~ Frequency: 50/60 Hz Current: 50/23/26 A Power: 22.4 kW TECHNICAL DATA: Csdpfx Aozp Hfpea Tohc ✅ Capacity: 150 l ✅ Maximum temperature: 200°C ✅ Chamber dimensions: 450x450x750 mm ✅ Overall dimensions: 1625x1930x2850 mm ✅ Total power: 25 kW ✅ Catalyst, programmable, historical curve tracking, nitric acid pump EQUIPMENT: ✅ Monitoring of nitric acid flow via a probe ✅ API control ✅ Siemens S7-300 If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,670 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 800 kg, number of chambers: 1, Equipment: CE marking, Protective gas annealing furnace, Vötsch type VAW 60/100 • Rated temperature: 750 °C • Power: 22 kW Csdpfoz Azauex Aa Tehc • Connected load: 24 kVA • Usable dimensions: 600 x 600 x 1000 mm (width x height x depth)

Condition: ready for operation (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina drying oven, manufactured in 2007 Cedpfx Aaszcnu Hs Tehc with three different climate zones: evaporation zone - heating zone - drying zone Mobile pallets with conveyors, therefore no minimum size requirement for components Continuous vertical conveyor system

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 300 kg, workpiece height (max.): 1,800 mm, workpiece length (max.): 7,200 mm, fuel: domestic gas L, Eisenmann Powder Coating System – Complete System for Sale A high-quality, industrial powder coating system from the renowned manufacturer Eisenmann is for sale. The system was installed in 1995 and has been continuously modernized and kept up-to-date technologically. It is currently in operation and can therefore be inspected under real operating conditions. The system is characterized by its high reliability, robust industrial design, and long-term operational safety. Thanks to ongoing modernizations, it offers an economical solution for companies looking to expand their coating capacity or replace an existing system. Technical Data • Manufacturer: Eisenmann • Year of Construction: 1995, but continuously modernized • Condition: In operation / ongoing production • Maximum workpiece dimensions: 600 × 1,800 × 7,200 mm (W × H × L) • Water dryer: max. 290 kW (natural gas), modulating, manufacturer Elko • Powder dryer: max. 460 kW (natural gas), modulating, manufacturer Elko • Heating boiler: max. 460 kW (natural gas), modulating, manufacturer Elko • Workpiece weight / carriage: 35 carriages with a workpiece weight of 300 kg • Coating technology: Automatic powder coating with Gema Magic-Cylinder system • Manual coating: Gema manual coating system for rework and special parts • Modernizations: Continuously updated to the latest technology • Pretreatment: renewed in 2024/25 by Euroimpianti, a 5-chamber system independent of chemical suppliers was installed. The system is currently operated with Alufinish chemicals in a chrome-free process. The pretreatment has a fully automatic Medotec chemical dosing and monitoring system. The pressure pumps are also monitored to ensure that the pretreatment is 100% effective. The chamber width is designed for 700 mm. The cycle time is currently 5 minutes/chamber, but can be adjusted individually. System Equipment • Conveying technology with automatic workpiece transport • Pretreatment area • Drying and curing technology • Automatic powder coating • Powder recovery system • Gema Magic-Cylinder application technology • Gema manual coating system with corona and tribotechnology • Control and regulation technology • Wastewater treatment • Demineralized water treatment, 2-fold redundant Special Advantages Codoz E R Abopfx Aa Tjhc • System is currently in productive use • Continuously maintained and modernized • Proven Eisenmann quality for continuous industrial operation • Suitable for large and long workpieces • High coating quality and process reliability • Immediate availability upon agreement • Large package of spare parts for pretreatment/pumps/application/conveying technology available The system is particularly suitable for companies in the fields of metal processing, steel construction, mechanical engineering, vehicle construction, and industrial contract coating. Since 2015, the system has consistently achieved GSB Master Seaproof certification. An inspection of the system is possible at any time by appointment. We will gladly provide further technical documents, layout drawings, photos, as well as information on throughput, oven dimensions, and conveying speed to interested buyers. Price: Negotiable Location: 7344 Stoob

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,490 mm, total height: 2,700 mm, The M.A.L. Mechatronic industrial vacuum cleaner is a mobile, high-performance suction and recovery system for abrasive blasting media and industrial waste. The system operates with a powerful vacuum technology, generating up to 650 mbar of negative pressure, and achieves air flow rates of up to 5,700 m³/h. The integrated H13 filter technology with a separation efficiency of 99.995% ensures the safe removal of even the finest dust particles. The robust steel frame construction allows for use under demanding industrial conditions. The system is particularly suitable for blasting and surface treatment processes where abrasive blasting media should be economically recovered and reused. Immediate purchase possible. Rental available, daily or monthly, upon request. Chodjzarwgopfx Aa Tec