Used surface grinding machines for sale (33)

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available Cslhccsz D Tb Reqkehc

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is a Rösler rotary vibrator, model R 780 Euro. Key data: Chjlhccqoz Ehgdokjc Manufacturer: Rösler Oberflächentechnik GmbH Type: Rotary vibrator R 780 Euro Working bowl width: 440 mm Outer diameter max.: 1,805 mm Extended container length: 4,100 mm Pneumatic actuation of separating flaps with hand lever valve.

Year of construction: 2012, condition: used, functionality: fully functional, OKAMOTO - ACC 64CA- Chjlozxri Sehccqkec 10 X: 800 mm, Y: 440 mm, Z: 522 mm

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Celhccjzw A Rwjqkjhc Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Year of construction: 2015, operating hours: 9,200 h, condition: ready for operation (used), travel distance X-axis: 765 mm, overall weight: 1,960 kg, total height: 1,900 mm, product length (max.): 1,850 mm, table width: 1,920 mm, number of axes: 3, This 3-axis KNUTH HFS 30638 C surface grinding machine was manufactured in 2015. It has a weight of 1,960 kg and has operated for approximately 9,200 hours. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 30638 C machine we have for sale. Contact us for further details. Chelhozzzxhsccqkjc - Total Power: 6.8 kW- Voltage: 400 V- Frequency: 50 / 60 Hz- Centralized Lubrication Unit: ISHAW YET-A2/A2P2, 2 L capacity- Hydraulic System Pressure: 1270 Psi- Included Components: Machine leveling feet/mounts (5 units visible), Electrical diagrams/manual- Compliance: CE-marked

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 3,500 rpm, table load: 200 kg, number of axes: 2, Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details. Cholhccjzwpt Ejqkjc * Grinding length: 500 mm* Grinding width: 200 mm* Maximum grinding height (table to spindle center): 350–397 mm* Magnetic chuck: 500 x 200 mm* Table load capacity: 200 kg* Hydraulic table feed: up to 27 m/min* Grinding spindle motor power: 1.5 kW* Standard grinding wheel: 225 x 19 x 50.8 mm Optional Accessories available

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 700 mm, travel distance Y-axis: 475 mm, travel distance Z-axis: 370 mm, overall weight: 3,800 kg, total width: 1,900 mm, total height: 2,710 mm, spindle motor power: 5,700 W, product length (max.): 2,750 mm, spindle speed (max.): 2,900 rpm, table load: 600 kg, number of axes: 3, This 3-axis ELB Schliff Perfket 6 SPS-NK was manufactured in 2004. It features a grinding range of 600 mm in length, 400 mm in width, and 475 mm in height. The machine has a maximum table load capacity of 600 kg and a longitudinal stroke of 700 mm. If you are looking to get high-quality surface grinding capabilities, consider the ELB Schliff Perfket 6 SPS-NK machine we have for sale. Contact us for further details. • Operating voltage: 3 × 400 V • Frequency: 50 Hz • Total power supply: 11 kW • Max. fuse protection: 25 A • Control voltage: 24 V DC • Grinding range: • X (length): 600 mm • Z (width): 400 mm • Y (height): 475 mm • Longitudinal axis X: • Table speed: 2–30 m/min • Vertical axis Y: • Max. feed speed: 300 m/min • Min. infeed: 0,001 mm • Cross axis Z: • Max. feed speed: 2000 mm/min • Min. infeed: 0,001 mm • Grinding spindle: • Taper: 36 mm • Drive power: 4,3–5,7 kW • Speed range: 1440/2900 rpm • Grinding wheel dimensions: • Diameter (D): 300 mm • Width (T): 50 mm • Bore (H): 76.2 mm Cslhcez Dvmpjcqkehc

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 650 mm, number of axes: 3, This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details. - Handwheel Graduations: 0.01 mm, 0.002 mm, 0.2 mm- Control Panel: Dedicated pendant control panel featuring an emergency stop button and an analog meter Colhccqszu R Rtjkohc

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels Chslhccewdnb Rjqkjc - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us!

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, overall weight: 3,000 kg, total width: 3,350 mm, total height: 1,800 mm, product length (max.): 2,180 mm, number of axes: 3, This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details. Cholhoztdz Nsccqksc • Stone = ø355 x 38 x ø127

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC Panel PC, overall weight: 2,100 kg, total width: 1,650 mm, total height: 2,050 mm, product length (max.): 1,200 mm, number of axes: 1, Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine. Colhcezyp Arjcqkohc - Voltage / Frequency: 400 V / 50 Hz- Max. Current: 50 A- Power Consumption: 26 kW- Wiring Diagram No.: S-2816- Machine Weight: 2100 kg (Nameplate) / Net weight 1900 kg- Dimensions: 1200 × 1650 × 2050 mm- Lapping Wheel Diameter: Ø 450 mm- Lapping Wheel Speed: 0–110 rpm- Max. Lapping Wheel Drive Power: 2 kW- Max. Load on Upper Lapping Wheel: 20 daN- Internal Drive Speed: 0–115 rpm- Max. Internal Drive Power: 0.5 kW- Lapping Wheel Drive Motors (DC Motor): Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 2 kW, Forced Ventilation 220 V (50/60 Hz)- Internal Drive Motor: Continuously variable DC Motor, Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 0.5 kW, Forced Ventilation 220 V (50/60 Hz)- Vertical Motion Motor: Stepper motor, 50 steps/sec, Torque 1100 Nm- Ring Gear Adjustment: AC brake motor (2 positions), 380 V / 50 Hz, Speed 700–1400 rpm, Power 0.25/0.37 kW, DC Brake 24 V (16 Nm)- Power Converter: Input 380 V / 50 Hz, Armature Voltage 270 V, Field Voltage 340 V- Worm Gear Ratios: Internal drive i = 1 : 30, Lower system i = 1 : 15.5, Upper system i = 1 : 15.5- Operating Compressed Air Pressure: 6–7 bar- Lapping Fluid Pump: 380 V / 50 Hz, Speed 2600 rpm, Flow rate 57 l/min, Protection class IP 44- Control and Measuring Device: Measuring range ±3 to ±11,000 mm (Millitron manual reference)- Inductive Sensor: Measuring range ±2 mm- Setpoint Adjustment Device: 4-digit display- Control Panel / System: Siemens SIMATIC Panel PC- Control System Processor: Intel Celeron M processor 1.50 GHz- System Memory: 1562624 KB (Ext. Memory), 640 KB (System Memory), 384 KB (Shadow Ram), 1024 KB (Cache Ram)- Hard Disk Storage: 40021 MB (Hard Disk 2)- BIOS / System Date: PhoenixBIOS, BIOS Date Operating System: Microsoft Windows XP Professional / Microsoft Windows Recovery Console

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B • Power Supply: 200 V • Power Supply Type: 3-Phase • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip • Ethernet (LAN) Interface • Extended Memory Control Module • FANUC Macro B • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h • General overhaul including geometric overhaul. The machine has only operated for approximately 504 hours since the overhaul Additional Equipment • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) Chelhccozk I Afjqksc • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)

Condition: as good as new (ex-display), functionality: fully functional, Demonstration unit. Cholezwv E Uohccqkoc

Year of construction: 2002, condition: ready for operation (used), controller manufacturer: FANUC, Surface grinding machine manufactured in 2002. This Jones & Shipman Format 5-200 includes Mitutoyo PH 350 projector and features a table size of 600 x 200 mm and includes a comprehensive set of accessories, including 42 new discs of various widths and 19 diamond dressers. The machine is in very good condition, having been operated primarily by the same operator. If you are looking to get high-quality surface grinding capabilities, consider the Jones & Shipman Format 5-200 machine we have for sale. Contact us for further details. • Offered in a set with Mitutoyo PH 350, including a complete set of accessories • Outer length: 600 mm Chjlhccqozr Nciokoc • Outer width: 200 mm • Including accessories: 42 pcs of new discs • New discs widths and quantities: 3 mm - 6 pcs, 4 mm - 1 pc, 6 mm - 11 pcs, 8 mm - 9 pcs, 10 mm - 3 pcs, 13 mm - 9 pcs, 16 mm - 2 pcs, 20 mm - 1 pc • Used discs mounted on a carrier - different roughnesses - 10 pcs • Diamond dressers: newly sharpened angle and radius - 19 pcs, suitable for repair - 7 pcs, 4 pcs on the machine • 5x disc drive • 1x balancer • Very good condition • Only one owner • Operated by the same operator 90% of the time

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Cholhcsx D Hi Rjcqkec Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter Chelhjyw Rhmeccqkoc - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Chslhccjyz Scgjqkjc Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Year of construction: 1990, condition: ready for operation (used), travel distance X-axis: 400 mm, number of axes: 3, Surface grinding machine manufactured in 1990. This GEIBEL & HOTZ FS 40 SA features a maximum grinding length of 400 mm and a grinding width of 200 mm. It has a maximum workpiece weight capacity of 150 kg and a clamping surface of 600 mm in length. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 40 SA machine we have for sale. Contact us for further details. Cslsz D Ty Hshccqkjhc - Max. Grinding Length: 400 mm- Max. Grinding Width: 200 mm- Max. Working Height: 300 / 330 mm- Max. Workpiece Weight: 150 kg- Clamping Surface / Table Length: 600 mm- Clamping Surface / Table Width: 200 mm- T-Slots DIN: 14H7- Number of T-Slots: 1- Spindle Diameter in Front Bearing: 35 mm- Additional Equipment / Accessories: - Digital Readout / Scale - Cross Clamping - PMF 50 - Electric Dressing Device - Stepless Cross Feed

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,200 mm, number of axes: 3, This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details. - Manufacturer: Reform- Working Area: 1,200mm x 500mm- Year of Manufacture: 1989- Condition: Very good / Fully functional Chjlhszb Erasccqkec

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,500 mm, number of axes: 3, This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details. - Manufacturer: ELB- Working Area: 1,500 mm x 500 mm- Year of Manufacture: 1989- Condition: Very good / Fully functional Chjlhccjzb Et Doqksc

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, overall weight: 1,250 kg, total height: 2,129 mm, spindle motor power: 1,500 W, product length (max.): 1,940 mm, table load: 120 kg, table width: 1,317 mm, number of axes: 3, This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details. • Grinding table • Grindable surface: 450 × 150 mm • Distance spindle–table: 60–510 mm • Max load on table: 120 kg • Wheel and spindle • Wheel diameter: 205 mm • Wheel peripheral speed: 2,400 m/min • Spindle motor power: 1.5 kW / 2P • Motors Cjlhccqjyiffgokshc • Hydraulic pump motor: 0.75 kW / 4P • Cross feed motor: 0.75 kW / 3P • Headstock up/down motor: 0.4 kW

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Cjlhccoxzuuvjqkshc Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: good (used), machine/vehicle number: 64 DX, Okamoto 64 DX surface grinder. Cjlhszkwudeccqkjhc

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm Celhcjxby Sgjcqkshc - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: good (used), 1 x table grinding machine Sigg Polyfinish D 2 for small parts with 10 chambers. Accessories: Cslhccqsvpikxokjhc 8 x plastic containers, 4 of which come complete with lid and holder. Further details to follow. The machine can be viewed under power.