Used filter systems / filtration units for sale (8)

Year of construction: 2017, condition: good (used), Changing Room and Personal Entry Area: Dimensions: 2000 x 2000 x 3000 mm The changing room is divided into two zones: a gray zone and a white zone. In the gray zone, personnel remove the footwear and gowns worn in the assembly area, sit on the bench separating the zones, and change into cleanroom footwear and gowns. Whenever personnel leave the cleanroom during operations, they must always change their attire upon re-entry. Cleanroom: Dimensions: 5500 x 4500 x 3000 mm The goods-in zone is separated from the cleanroom adhesive area (1750 x 750 x 3000 mm). Doors and windows between the goods-in zone and the cleanroom are interlocked; only one door or window can be opened at a time. Upon entry: doors only open after a 6-minute delay, except when issuing storage devices, when no 6-minute lockout is applied. After processing, the glued products are mechanically transferred to the assembly area via a pass-through window. Delivery windows must always be closed after the transfer process. The cleanroom is pressurized, regulated via control dampers. Air of ISO8 quality is supplied to the cleanroom through filters installed in the air handling unit. Air handling units are installed on the support structure above the cleanroom ceiling. Air cleanliness is continuously monitored and recorded. If air cleanliness falls below acceptable levels, a visual alarm notifies personnel, or intervention in the production process occurs and doors and windows are locked. Supply Fan: Air volume: 8,000 m³/h Static pressure: 400 Pa 400 V, 50 Hz, k kW With silencer Ventilation ductwork HEPA filter Frame Structure: Powder-coated Manufactured from cold-rolled profile materials Side Walls, Roof Structure: LV80 Kingspan sandwich panels 3 fixed windows, transparent and thermally insulated 2 entry doors, each with a fixed, transparent upper window 2 hatch doors, each with a fixed, transparent upper window 1 outlet opening with sliding window sash Electrical Control: Djdpfx Ajyhbczof Dscc Electrical distribution cabinet Control cabinet Frequency converter Measuring instruments Monitoring System: Vision monitoring system Data storage computing unit (laptop) Changing Room Furnishings: Gray zone: - Shoe storage - Coat storage - Hanging zone - Dividing floor

Condition: new, functionality: fully functional, Year of construction: 2025, The dust collector for cabin sandblasters is a complete unit equipped with an engine and a filter. Ensures effective removal of dust and dust from the sandblaster, improving visibility and eliminating escaping dust. Perfect for cabins with a large usable area, it ensures hygienic and safe working conditions. Device description The dust absorber intended for cabin sandblasters is a complete solution equipped with an engine and a filter, ensuring effective dust removal. It is ideal for use in various types of large-area booths where sandblasting is carried out. Thanks to its advanced design, the absorber effectively removes dust from the sandblaster, which improves visibility during operation. Dust that previously escaped from the device is now effectively removed, ensuring more hygienic and safe working conditions. The engine integrated with the absorber ensures high dust extraction efficiency. Thanks to this, users can enjoy the effective operation of the absorber, and sand and dust from the sandblaster are effectively collected and retained in the filter. The filter is a key element of the absorber that is responsible for retaining dust. Effectively retains dust particles and prevents them from returning to the cabin air. Thanks to this, employees are protected against inhaling harmful substances and have better air quality around them. The dust absorber intended for cabin sandblasters is not only an effective tool for maintaining cleanliness, but also ensures safe working conditions and improves the efficiency and precision of sandblasting. Technical data Dedpfx Afsrh E Azs Djcc Extraction power 1100W Performance 3m³/min Power 230V/50Hz Noise level 85dB Inlet diameter 52 mm Handle length 280 mm Guard dimensions (height x diameter) 730 x 260 mm Filter dimensions (height x diameter) 310 x 170 mm Weight 9.5 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Djdew Ivr Djpfx Af Docc a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Djdpsw Ivrqsfx Af Docc Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Dcsdpfxow Ivqgj Af Dec a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Dodpew Ivpvofx Af Docc

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Cleaning air contaminated with VOC materials by means of regenerative thermal oxidation. The system was installed in 2017 but never used and is in good condition. Dismantling of the installation must be done under your own management, if necessary. with support from the supplier. Dederdfxrjpfx Af Djcc

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. Dodpfx Aevxfkaef Djcc VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations