Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Buffer: 50 mm Pjdegxug Tepfx Amusgn Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tension, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers, with buffer 50 mm

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, infeed and oscillation, polishing hood. polishing wheel: max. Ø 1.000 mm Pjdpfx Amegxugdsujgn spindle diameter: 45 mm polishing wheel width: max. 150 mm infeed: 200 mm oscillation: 50 mm Suction connection: Ø 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Electrical connection: 3 x 400 V, 7,5 kW, IP54

Year of construction: 2021, condition: new, for grinding belts Pedsgxuhmjpfx Amuegn max. 80 mm x 2000 mm length with 3 kW drive power, for contact wheel max. diameter 80 mm x 80 mm

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed Pedpowdnb Refx Amusgn - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us!

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm Podpfx Ajxby Sgemujgn - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: used, We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet Pgodsxlufvjpfx Amuon If you have any questions, please do not hesitate to contact us!

Condition: used, We are selling a used extraction unit, model IES 20-35-4 / 11MD, manufactured by Ulmatec. The drive power is 11 kW. If you have any further questions, please feel free to contact us! Podjxxxwcspfx Amuogn

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) Pgsdpfxjgxug Ej Amuon spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers With top roller for free belt grinding

Condition: used, Year of construction: 2011, AABO Powder coating line Pgsdpfx Amjyrnh Eeuon

Year of construction: 1989, condition: used, max. temperature 1000 Grad size of opening 170 x 90 mm depth of chamber 280 mm total power requirement 3 kW weight of the machine ca. 80 kg dimensions 0,7 x 0,55 x 0,72 m Pgedpfxjtqqptj Amuen

Condition: excellent (used), Year of construction: 2015, - Continuous flow, suspended part shot blasting system, specifically designed for automatic, continuous surface treatment of suspended workpieces. - Suitable for applications such as derusting, descaling, deburring, fine finishing, final shot blasting, or roughening. - Flexible workpiece suspension. - Efficient blasting technology through high-performance turbines. - Automatic continuous operation. - System dimensions: 12.75 x 6.6 x 10.42 m (W x H x L). - Door opening dimensions: 2.0 x 2.0 m (W x H). - Workpiece dimensions: max. diameter 2,100 mm, max. height 2,100 mm, max. hook load 2,000 kg, max. part temperature 80 °C. - Abrasive: round F16-20. - High-performance turbines, type 3.6, quantity 06. Psdpfsy T H Ihox Amuogn - Impeller diameter 380 mm. - Blade width 55 mm. - Number of blades per turbine: 6. - Drive power per turbine: max. 11 kW.

Condition: used, Year of construction: 2000, Oerlikon Sulzer Metco HVOF coating system, DJCE complete system with burner, control unit, and powder feeder Combustible gas: propane, ethylene, or hydrogen possible has been in storage for several years. Pedpezb Agbofx Amuegn

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, Equipment: documentation/manual, Giardina high-bay dryer, manufactured in 2007 equipped with three different climate zones: evaporation zone – heating zone – drying zone Fitted with explosion-proof components, making it suitable for use with water-based and solvent-based paints Pgsdpszcnu Hefx Amuen Mobile pallets with conveyor belts, eliminating minimum size requirements for components Continuous vertical conveyor system

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. Pjdpfxsyzw Hws Amuogn 4. Crossbeams with wheels (20 pcs.) Currently, the line is dismantled and ready for transport.

Condition: good (used), Year of construction: 1988, Equipment: cabin, IEPCO Micropeen Peenmatic 1000 SK with tilting hood with filter tower, blasting guns, manual Special features: - Tilting hood, opening angle approx. 70° - Heating system for abrasive media drying - Conveying system for pre-acceleration of blast media - Pneumatic filter cleaning Working chamber (WxDxH): 800 x 800 x 840 mm Year of manufacture (estimated): 1988 Good, well-maintained condition, operating hours: 600h Overall dimensions (without filter tower): 1800 x 1900 x 2000mm Weight: 530kg (blasting unit), 100kg (filter tower) Pjdsyk Dm Iopfx Amuegn Sale only to businesses as defined in § 14 BGB.

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Podpey Tiaajfx Amuegn Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: new, Year of construction: 2026, functionality: fully functional, Blasting container, 40 ft, with 9 m blasting chamber, screw conveyor floor (very low maintenance), blasting media preparation, and filtration system. Pgedjzbztaopfx Amuon Chamber dimensions (internal): approx. length = 8850 mm, height = 2485 mm, width = 2250 mm. Option: width including widening = 3240 mm. Transport height: approx. 3000 mm. Floor height: approx. 440 mm. Options: - Side container opening for 9 m and 3 m machine room - Side extension for widening the blasting chamber - Crane roof opening (not possible with side opening) - Crane track, 500 kg and much more upon request.

Condition: used, Used automatic shot blasting machine from KF Strahltechnik for sale. The machine is designed for the automatic shot blasting of profiles, sheet metal, and steel structures. The four blast wheels/turbines make the machine suitable for efficient processing of the top and bottom surfaces of workpieces. The machine is in good condition and is currently in operation. An inspection and test run at our facility are possible by arrangement. Technical data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting machine Number of turbines: 4 Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel structures, and similar workpieces Pgodpfx Amekw Ukueusn Processing: Shot blasting of the top and bottom surfaces Roller conveyor at the front: approx. 6 m Roller conveyor at the rear: approx. 6 m Condition: Good, currently in operation Inspection: Possible at the facility Test run: Possible by arrangement Delivery and sales conditions The stated price is the ex-works price for direct collection. Dismantling, loading, transport, and installation/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. An inspection and examination before purchase is expressly possible. ✅ Automatic shot blasting machine from KF Strahltechnik ✅ 4 turbines/blast wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm ✅ Roller conveyors at the front and rear, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test run possible at the facility ✅ Price ex-works, dismantling and installation optionally available at an extra charge

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, suction capacity: 1,200 m³/h, total height: 610 mm, total length: 800 mm, total width: 625 mm, overall weight: 100 kg, The LTA E 120 air filter extraction system is an electrostatic filtration system specifically designed for the separation of oil and emulsion mists in industrial applications. Such systems are characterized by consistently high separation efficiency and contribute to sustainable production. Pgsdpsv S E H Ujfx Amuen A key feature of LTA filtration systems is the automatic cleaning in place (CIP) system, which ensures consistently high filtration efficiency and long-term operational reliability. This system automatically cleans the filter elements with the cooling lubricant used in the machine, without the use of chemical additives or diluted solutions.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, suction capacity: 1,200 m³/h, total height: 2,970 mm, total length: 930 mm, total width: 930 mm, overall weight: 250 kg, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Pjdpfx Amsv S E Ncousgn

Condition: used, Year of construction: 2003, functionality: fully functional, We offer this used Schlick sandblasting system, manufactured in 2003, for sale. Pgsdezbzwxepfx Amusn It features a throwing wheel, a centrifugal wheel, and a pressure tank, as well as fully automatic sand filters and a conveying system. It also includes dust extraction and electronically controlled conveying wheels. The system is in very good working order. We offer professional dismantling and reassembly services within Switzerland at very favorable conditions. Year of manufacture: 2003 Factory number: 24/23717 Type: If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250106, warranty duration: 12 months, total width: 685 mm, total height: 1,665 mm, total length: 1,000 mm, type of input current: AC, overall weight: 350 kg, inner dimension width: 520 mm, inner dimension length: 750 mm, inner dimension height: 660 mm, input voltage: 230 V, Equipment: cabin, documentation/manual, lighting, Compact, front-operated, semi-automatic 2-in-1 blasting cabinet made in Denmark with removable drum for blasting small to medium-sized workpieces / 3D printed components. - You save time, air and energy. - Flexible adaptation to the shape of the workpiece. - Eliminates tedious manual work. - Eliminates bottlenecks in production. - Easy and simple operation due to semi-automatic operation. The integrated rotating drum can continuously and automatically remove plastic or metal particles from small parts after printing. The nozzle can be started automatically when the drum is rotating. After cleaning the parts, clean compressed air can be blown in to remove the residual dust from the parts. The drum itself can be easily and quickly removed for filling or emptying. For manual blasting, the drum is removed and the entire blasting chamber can be freely operated using a foot pedal. - Professional compact blasting cabin - 1 large swing door with safety door switch - Safety glass, replaceable glass pane - Rubber coating on the inner side walls - Integrated cabin interior lighting - Stable nozzle holder Pgedjvvmaqopfx Amuon - Nozzle(s) made of tungsten carbide - Foot switch for manual blasting - Pressure gauge and pressure regulator

Year of construction: 2014, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 230 mm, number of axes: 2, Surface grinding machine manufactured in 2014. This OKAMOTO ACC 42 SA-iQ features a working surface of 450 x 200 mm and a longitudinal stroke of 530 mm. It includes a maximum weight capacity on the table of 120 kg and a standard grinding wheel diameter of 205 mm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 42 SA-iQ machine we have for sale. Contact us for further details. • Working surface: 450 x 200 mm • Magnetic chuck surface: 400 x 200 mm • Longitudinal stroke: 530 mm • Longitudinal feed: 0.1–25 m/min • Cross stroke: 230 mm • Intermittent automatic cross feed: 0.5–20 mm • Continuous automatic cross feed: 0–1000 mm/min • Manual handwheel graduation (cross): 0.0001 / 0.001 / 0.01 mm • Vertical stroke: 357 mm • Rapid vertical feed: 0–1000 mm/min Pedpjy Rzmyjfx Amuegn • Manual handwheel graduation (vertical): 0.0001 / 0.001 / 0.05 mm • Automatic increment range: 0.0001–0.03 mm • Distance between spindle axis and table surface: 22–303 mm • Max weight on table (including chuck): 120 kg • Standard grinding wheel diameter: 205 mm • Max peripheral speed: 1000 / 3600 m/min • Spindle motor: 2.2 kW • Hydraulic pump motor: 0.75 kW • Cross feed motor: 0.75 kW • Head elevation motor: 0.75 kW • Net machine weight: 2,090 kg • Floor dimensions: 2,270 x 2,781 mm

Condition: used, Year of construction: 2011, max. temperature 1280 Grad size of opening 350 x 250 mm depth of chamber 500 mm volume 41 L voltage 400 V total power requirement 15,0 kW weight of the machine ca. 277 kg dimensions of the machine ca. 1,15 x 1,45 x 1,35 m - Serial-No.: 219660 - control: NABERTHERM B300 - with swivel table 340 x 550 mm Pgjdpjy R Efgefx Amusn

Condition: good (used), Year of construction: 2014, For sale: a professional Nabertherm L40/12 muffle furnace with a working temperature of up to 1200°C. Ideal for ceramics, laboratories, heat treatment of metals, sintering, sample roasting, and many other applications. Model: L 40/12 / B180 Power: 6 kW Power supply: 400 V Max. temperature: 1200 °C Chamber volume: 40 liters Year of manufacture: 2014 Condition: Functional, heats up properly Pgjdpfx Amozb Iv Ueujn Weight: approx. 70 kg