Used Millutensil Spotting Press for sale (19)

Condition: used, Hydr. spotting press MILLUTENSIL type BV 25 PM Machine. No. 632 / 25111 Year of construction 1991 Closing force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mm Frame width 900 mm Installation height max. 750 mm Installation height min. 230 mm Stroke of the upper table 520 mm Lifting speed infinitely variable 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 bar Tool weight on the table max. 2500 kg Tool weight on the upper table max. 800 kg Table height above floor 850 mm Motor power 4 kW Mains connection 380 Volt, 50 Hz - Upper table can be swiveled 360° by motor - Hydraulic ejector unit in the table with 120 mm stroke - M 14 threaded holes in the table - Hydraulically extendable table Laodpfotx E Rdox Abksh - Depth adjustment bar for automatic downward stroke limitation Space requirement L x W x H 1550 x 1500 x 2000 mm Weight 1900 kg

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed Ljdswpkv Iepfx Abkeah 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: excellent (used), Year of construction: 2022, clearance between the columns: 2,130 mm, overall weight: 56,000 kg, retraction force: 55 t, clamping force: 2,000 kN, MIL263 straight version for floor installation few operating hours Siemens S7-1500 / Multipanel TP1200 diagnostic system 2 pcs. Sitema safety catch lower pull-out table; upper machine table tiltable by 180 degrees rotary table with 5 positions electronic parallelism control separate hydraulic unit on trolley for core pulls 4+4, standard version pump 8 liters/min, 2.2 kW Lsdpfewu Upiex Abksah

Condition: used, Year of construction: 1995, pressure 80 t table length 1.200 mm table width 1.000 mm 250 mm 1.200 mm max. table load 7.000 kg distance between columns 1.100 mm voltage 400 V weight of the machine ca. 11,0 t dimensions of the machine ca. 4,40 x 2,58 x 3,66 m - Serial No.: 760/12312 Laodpsvbwitefx Abkoh Dimensions of upper and lower plate: 1.200×1.000 mm. Press upper plate is tilting by 150° Lower plate tilting by ±70° at front/back side The press is equipped with: - 2 energy accumulators in order to better gauge the adjustment of the mould halves - an automatic wax injection unit to check quality of pre-production mouldings - hydraulic ejection unit on lower plate

Condition: excellent (used), Year of construction: 2003, operating hours: 500 h, functionality: fully functional, machine/vehicle number: BV26E.257, installation height: 920 mm, table width: 980 mm, table length: 850 mm, table load: 4,000 kg, overall weight: 3,600 kg, stroke length: 620 mm, pressing force: 30 t, Hardly used, in excellent condition. Laodow Av Hxepfx Abksh

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm Lodpeufufbefx Abkeah This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: good (used), Year of construction: 1991, Millutensil spotting press BV25/PM - Adjustable ejection force (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Lodpfxjum Ry Ee Abkeah Shipping with forwarding agent.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm Laedpfxsrr Ui Ro Abkeh ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, table width: 980 mm, table length: 750 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS Max. clamping force: 300 kN Max. load capacity of the lower plate: 4,000 kg Max. load capacity of the upper plate: 1,200 kg Lsdpfx Aevxtikobksah Swivel angle: 360° Table data Table dimensions: 980 x 750 mm Passage: 1,090 x 920 mm MACHINE DETAILS Machine weight: 3,900 kg Dimensions: 2,200 x 1,900 x 2,300 mm EQUIPMENT Energy storage (impact trigger) Special wax injection unit User-friendly control panel with graphics

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Application Types Lasdpfx Absxnd Sdskoh Bending

Condition: used, Year of construction: 2023, Milutensil L21-05537 Automatic Coil Feeder Press Line 300T; Including Milutensil Equipment: Colombo Press Mercurio 1 (300T-A); SFOC 10000 Decoiler; RMB 60.9.800 C Straightener; AE 125.800 Electronic Feeder; LRF110.800 Lubricator Lsdpfx Abew U N Npokeah

Condition: used, Year of construction: 2022, Millutensil Colombo Coil Fed Press Line 300T (2022) comprising Colombo Mercurio 1 300T-A press Capacity: 300T Table: 1300 x 1200mm Lasdpfxsxlqqzo Abksh Opening: 800mm Millutensil SFOC 10000 Decoiler: Capacity: 10,000 kg Maximum Belt Width: 800 mm Max. coil diameter: 1600mm Millutensil RMB 60.9.800 C Straightener Working width: 800 mm Millutensil AE 125.800 Electronic Feeder Millutensil LRF110.800 Lubricator

Condition: excellent (used), Year of construction: 2006, Table size 3500 x 2500 mm Siemens Simatic OP7 controller Max. work load 80 Ton New price 1 Mil EUR Working force up to 250 Bar Lasdpfx Aboxam Sdsksh Power 30 kW Distance between column:3700mm Hight under roof: 2650mm Table Length: 3500mm Ram stroke: 2100mm Approche speed: 80mm/min. Working speed: 8mm/min. Return speed: 50mm/min. Length: 7800mm Width: 5500mm Height: 6510mm Weight: 135000kg

Condition: used, _____ Description: Year of manuf. : 2022 Laodpfxswx T Ufe Abkjh In Generel: Table dimensions:1,500 x 1,000 mm Max. clamping force:500 kN Max. load capacity top plate:2,500 kg Max. load capacity under plate:7,000 kg RG version:plate can be pulled out and tilted :

Year of construction: 2012, condition: ready for operation (used), This MILLUTENSIL Mil 303 hydraulic press was manufactured in 2012. It features a usable table of 3000 mm by 2000 mm, with a maximum load capacity of 30,000 kg on the upper table and 70,000 kg on the lower table. The press operates with a total power of 31.1 kW and offers adjustable hydraulic pressure up to 240 bar. Consider the opportunity to buy this MILLUTENSIL Mil 303 hydraulic press. Contact us for more information. Application Types Lodpfxjxnr Dhj Abksah Bending

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Length: 3400mm Width: 3400mm Height: 3500mm Weight: 19000kg Laodpfx Abowyuqkoksh

Year of construction: 2003, condition: ready for operation (used), Control Unit Lajdpfx Aboxlvb Ejkoh Brand SIEMENS Model SIMATIC OP7 This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information. Application Types Stamping

Condition: like new (used), Year of construction: 2012, Millutensile AE6020 100, year 2012 , width 100 mm, max thickness 3 mm, speed 120 m/min, including spray lubrication unit. Lasdpfxsxbq Sqj Abksh + uncoiler SM400, year 2012, max load 400 kg, max width 200 mm, motorised

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Lsdpfx Aou A T Hzsbksah Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...