Used profile bending machines - intake diameter 31-50mm for sale (56)

Condition: new, Year of construction: 2004, 30 mm 30 mm Dwedpfx Asw Tdxpsduef flat steel 50 x 10 mm L-beam 40 x 40 x 5 mm Axis diameter 30 mm roll diameter -toolpieces 132 mm total power requirement 0,75 kW weight of the machine ca. 0,19 Kg dimensions of the machine ca. 1,2 x 0,8 x 1,4 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Foot switch - Emergency stop device

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement / kW weight of the machine ca. 1000 kg required space 1200 850 x 1200 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 65 Upper shaft diameter: Ø 60 mm Bottom shaft diameter: Ø 50 mm Roll diameter: Ø 180 mm Working speed: 6 m/min Motor power: 3.75 kW / 380 V Dimensions (L x W x H): 1200 x 850 x 1200 mm Weight: 1000 kg Dwedew Nbmpopfx Adusf Standard Accessories: Steel construction welded frame 3 rolls are powered Hardened and ground shafts made of high tensile special steel Horizontal and vertical working position Hardened standard rolls Mobile control panel 3-axis mechanical lateral angle guide rolls Brake motor equipped for precision bending Digital read-outs (2 pcs) Optional Equipment: NC control Hydraulic lateral guide rollers (2-axis) Spiral bending crane Special profile rolls

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal Dwjdpfx Aefkz Rbjduof - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Dwjdpfx Adswt Sy Asuof Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: good (used), Year of construction: 1999, Manufacturer: Tauring Type: DELTA 50 CNC Control: TAURING CNC-S Year of manufacture: 1999 Shaft length 115 mm Max roll diameter 175 mm CNC-C means Computerised Compact Numerical Control. Thanks to the small size offered by the most modern technology and a competitive price it has been possible to obtain a powerful, reliable and suitable product. Tauring bending machines can be equipped with this device, which gives the possibility to realise any shape of regular and irregular geometrical bending. The machine equipped with the CNC-C device executes automatically and in only one pass up to 30 program steps (in the same bar 30 bends of different radius), by simply setting the radius and length in mm of each segment composing the shape. Specifications Metric US Standard Horizontal and Vertical Dodpfewp Idvjx Adujwf H+V Axis Ø 115 mm Number of rolls 3 Control TAURING CNC-S Dimensions (estimate) Length 1400 mm Width 1400 mm Height 1400 mm Weight 780 kg Please note: The information on this page has been obtained to the best of our knowledge and belief by us, and where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent any warranty or contractual terms. We recommend that you check all essential details.

Condition: new, Metallkraft PRM 40 FH ring bending machine Can be used horizontally and vertically for profiles and tubes with foot operation. Heavy cast construction Hardened bending rollers Shafts made of special steel, hardened and ground Lateral straightening rolls, infinitely adjustable All 3 rolls driven by gears Horizontal and vertical working position Suitable for particularly small bending diameters Suitable for particularly small bending diameters due to orbitally adjustable lower rolls Mobile control panel with two digital displays for the infeed rolls Dwodpfx Ajcf D Rbjduof Straightening rolls suitable for bending angle iron as standard special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials Device for twisting bars Spiral bending tool TECHNICAL DATA: Length (product) approx. 1050mm width/depth (product) approx. 500mm height (product) approx. 1250mm Weight (net) approx. 350kg Bending power see data sheet Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 35mm Shaft diameter bottom 35mm roller diameter top 137mm roller diameter down 137mm Speed 7m/min SCOPE OF DELIVERY: Standard bending rolls digital displays for infeed rolls mobile control panel straightening rolls substructure

Condition: new, Year of construction: 1994, 30 mm 30 mm flat steel 50 x 10 mm Axis diameter 30 mm work speed 6,0 U/min roll diameter -toolpieces 132 mm total power requirement 0,75 kW weight of the machine ca. 0,25 Kg dimensions of the machine ca. 0,6 x 0,8 x 1,3 m Profile bending machine with: Djdpfxowrzr Ej Aduewf - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Djdpfx Ajw Hx Tvsdujwf Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: used, Year of construction: 1995, Ring & profile bending machine Type: Alpha 50 H2 Shaft diameter 50 mm Shaft length 115 mm Standard roller diameter 175 mm Speed ​​8 rpm 3 rollers driven Weight 650 kg Hydraulic roller adjustment Dwjdpfxswmdp Nj Adujf Including various roller sets Price excluding VAT

Condition: new, Year of construction: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Dwedehgiuhepfx Adujf Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Year of construction: 2023, condition: new, ERCOLINA CE40MRE hydraulic bending machine No.03 driving rollers - Three-phase Digital display unit included Shaft diameter 40 mm Standard working rollers diameter 165 mm Max push roller stroke 124 mm Shaft speed 10 rpm / 10-20 rpm (mod. V2 60Hz) Machine work surface ,Horizontal and Vertical Top roller adjustment, Manual with reducer Dimensions 560x1430x980 mm Dwodsmkh Hijpfx Aduef Weight 300 kg

Condition: used, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg Dsdpfx Aew Rd Sksduewf - dimensions: 530x420x500 mm

Condition: new, 35 (600) mm 35 (900) mm L-beam 50 x 50 x 5 (800) mm T - beam - web outwards 60 x 7 (600) mm Dwodpfsfv H Etjx Aduof Axis diameter 50 mm work speed 4,5 m/min total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine Dodpfx Aot U R H Ueduewf • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: 070A-633, shaft diameter: 70 mm, roller diameter: 245 mm, rotational speed (min.): 8 rpm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, Equipment: documentation/manual, emergency stop, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated reversible, can work with shafts vertical /horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Dwodpfxowkrpfj Adusf Weight 1300 kgs

Condition: new, Ring profile bending machine Ostas OPK 42 Incl. standard roller set steel Motorized ring bending machine Dwodpfsgw Hmqsx Adusf horizontal and vertical applicable with 2 driven rolls lower rolls motor driven rollers are hardened manual feed via upper roller left/right rotation by means of foot pedal shaft-Ø 50 mm roller-Ø top 158 mm roller-Ø bottom 158 mm speed 4,4 m/min Motor power 0,75 kW Electrical connection 400 V According to CE standard Weight 380 kg According to CE standard

Condition: new, Year of construction: 2024, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Dwsdpfx Adedktnkjuef

Condition: new, Year of construction: 2009, 35 (800) mm Dsdpfswrzrfjx Aduswf 35 (1200) mm L-beam 50 x 50 x5 (850) mm flat steel 60 x 10 (800) mm Axis diameter 50 mm work speed 4,5 m/min roll diameter -toolpieces 155 mm total power requirement 1,5 kW weight of the machine ca. 0,9 Kg dimensions of the machine ca. 0,6 x 0,9 x 1,35 m Profile bending machine with: - Foot pedal for right/left rotation - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation

Condition: new, Ostas hydraulic profile ring bending machine OPK 45 2 driven rollers Digital display Incl. standard steel roller set Description Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 2 driven rollers 2 rollers motor-driven Adjustment of the upper roller hydraulic Rollers are hardened Left/right rotation using foot pedal Mounting: shaft 50mm Roller diameter at top 158 mm Dodpfxjvmzfij Adujwf Roller diameter at bottom 158 mm Speed 4.5 m/min Motor power: 0.75 +1.5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: new, 35 mm 35 mm bar material dia. max. 70 x 2 mm rectangle 60 x 60 x 3 mm flat steel 60 x 10 mm Axis diameter 50 mm work speed 4,3 m/min total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,9 x 0,95 x 1,4 m Profile bending machine with: - Foot pedal right/left rotation Dwjdpfsk Dvhhex Aduof - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven

Condition: new, Tubend hydraulic profile ring bending machine HPK 50 3 driven rollers Digital display Incl. standard roller set steel Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 3 driven rollers 3 motor-driven rollers Hydraulic infeed of the top roller Hydraulic: 8 tons Rollers are hardened Left/right rotation via foot pedal Mounting: shaft 50 mm Roller Ø 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection 400 V According to CE standard Weight 510 kg L.W.H. 810 x 950 x 1500mm Dwsdpfxeum R U Ae Aduef Power table see PDF file

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min Dwsdpfx Ajv Skzdeduof total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Incl. standard roller set steel Dodpfxjg Tzbwo Aduowf Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: new, Akyapak Akbend ring profile bending machine APK 50 Description - lower roll adjustment, hydraulic both lower rolls can be adjusted - horizontal and vertical working - Control panel ( the position of the lower rolls is shown in the display ) - Standard rollers included - 3 driven rollers - CE-sign / declaration of conformity - Instruction manual Technical details - Bending capacity see performance table - bending speed : 4,4 m/min - Roll diameter : 157 mm Djdpfx Adod Er S Ajuewf - Shafts : 50,0 mm - total power requirement : 1,1 kW - weight: 500 kg - Dimension L-B-H: 950 x 700 x 1220 mm

Condition: new, Akyapak Akbend ring APK 35 profile bending machine Description •. base • horizontal and vertical working • Foot switch • Standard rolls (shared) • 2 driven rollers • CE mark / conformity declaration • User manual in German Technical details Djdpfxjd Er S Ie Aduowf • I - steel - flat: 120 x 15 (d 750) mm • I steel upright: 60 x 10 (800 d) mm • Angle steel: 50 x 5 (1200 d) mm • Round material: 35.0 (800 d) mm • Max size: 70 x 2 (1200 d) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m / min • Diameter of the roller - top: 155 mm • Bore: 50.0 mm • Total power: 1,5 kW • Weight: 320 kg • Dimensions L W H: 730 x 830 x 1350 mm