Used other metal grinding machines for sale (131)

Condition: good (used),

Condition: used, Vacuubrand Type: MV 10C EX VARIO VACUUBRAND VARIO chemical diaphragm pump Technical data: Max. pumping capacity 50 Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum gauge / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Rated speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Guodpfx Aiszgci Sspoh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2018, condition: used, Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible. Gusdpfez R A Nrjx Aipsh

Year of construction: 2002, condition: used, Grinding wheel dimensions: 455x305x229.6mm, grinding diameter: 2-50mm, length: 2,450mm, width: 2,100mm, height: 1,600mm, weight: 3.7t, operating hours: unknown, including documentation, tooling package and clamping devices, out of operation since 2023. On-site inspection is possible. Gjdpfx Aisz R A N Sepsuh

Condition: used, Year of construction: 2010, power: 6.5 kW (8.84 HP), Long-belt sanding machine suitable for sanding both large containers as well as standard sheets and smaller components. The machine can also be used as a standard-height machine! Guodpfoywzvhex Aipeh

Year of construction: 1994, condition: good (used), Manufacturer: Rollomatic Year of manufacture: 1994 Type: CNC 24-F Gujdswhznxepfx Aipoh Machine number: 142 3 x 380 V, 50 Hz

Year of construction: 2016, condition: used, overall weight: 16,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,200 mm, JUNKER JUPITER 500 – CNC Cylindrical Grinding Machine Plunge-Cut Method Technical Data: Workpiece diameter: 2–220 mm Workpiece length: max. 500 mm Corundum grinding wheel: 610 × 500 × 305 mm CBN grinding wheel: 500 × 500 × 305 mm Guedpfoz E T Tpex Aipeh Spindle drive: 37 kW Regulating wheel: 350 × 500 × 203 mm Regulating wheel speed: 1–800 rpm Regulating wheel drive: 11.5 kW Power: 81 kVA Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4500 x 2600 x 2200 mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Surface Grinding Machine This machine type is a machine with a motor-driven grinding spindle. The workpieces are clamped and ground using clamping devices that are adapted to the specific task. The devices are attached to the machine bed. The column carriage, on which the motor spindle is mounted, serves as a feed, dressing, and oscillating slide. Manufacturer: Diskus Type: DSH 600/1000 Operating voltage: 380 V DC voltage: 24 V Control voltage: 220 V Rated power: 27 kW Rated current: 56 A Year of manufacture: 1964 Gusdpfx Aehtyudsipeh Condition: used You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2017, condition: used, working width 200 mm mains connection 400 V / 50 Hz rated current 25 A connected load 10 kW Through-feed grinding machine with extraction system Gjdpfxjz Ic Axe Aipouh Condition: Used Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors regarding technical data and specifications; subject to prior sale.

Year of construction: 1978, condition: used, We offer this used Doebeli OP 125 optical profiling machine, model OP 125x102, manufactured in 1978. Machine number: OP 125x102 Year of manufacture: 1978 Gsdoz Dg A Uspfx Aipjuh Supply voltage: 380 V Frequency: 50 Hz Phases: 3 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control We do not have any further technical data. Gedpfx Aiszvfpyepsuh

Year of construction: 1977, condition: used, machine/vehicle number: IntNr231519, A used Jung HF 40 surface grinding machine, manufactured in 1977, is offered for sale. This is a robust, heavy-duty model. Technical data: Type: Hydraulic Table size: 400 x 150 mm Grinding length: 400 mm Grinding width: 150 mm Grinding wheel diameter: 200 mm Guedpfjz Ir Sijx Aipeh Grinding wheel width: 16 mm Spindle speed: approx. 2,800 rpm Table speed: infinitely variable from 2 to 20 m/min Automatic vertical feed: 0.002–0.013 mm Machine weight: approx. 900 kg Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and information.

Condition: good (used), Year of construction: 2003, Wampfler GS 21ML/LT Slip Ring Assembly GS 21 Technical Details: • Manufacturer: Wampfler • Type: GS 21ML/LT • Year of Manufacture: 2003 • Protection Class: IP54 • Configuration: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Application: Slip ring assembly for the safe transmission of power and signals in rotating applications, including: • Crane systems • Lifting and conveying technology • Wind turbines Gjdpfx Aisxl Avpopjuh • Mechanical engineering Condition: Used (see images). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 1996, condition: ready for operation (used), overall weight: 6,450 kg, total width: 3,140 mm, total height: 3,705 mm, product length (max.): 6,485 mm, number of axes: 2, Cylindrical grinding machine manufactured in 1996. This Estarta 318 MV features a grinding diameter range of 1.5–120 mm and a maximum infeed grinding length of 254 mm. It includes a grinding wheel with dimensions of 610 × 254 × 304.8 mm and a powerful 22 kW drive motor. If you are looking to get high-quality grinding capabilities, consider the Estarta 318 MV machine we have for sale. Contact us for further details regarding this machine. • Operating hours: 45,780 h • Refurbished and automated: 2019 • Grinding diameter: 1.5–120 mm • Maximum infeed grinding length: 254 mm • Grinding wheel dimensions: 610 × 254 × 304.8 mm • Grinding wheel minimum diameter: 400 mm • Grinding wheel peripheral speed: 35 m/s • Regulating wheel dimensions: 305 × 254 × 127 mm • Regulating wheel speed: 10–250 rpm • Grinding wheel drive motor: 22 kW • Regulating wheel servomotor: 12 Nm • Gross weight: 6,850 kg Additional equipment Gusdpfx Aioz Ia Dyspoh • FANUC LR Mate 200iD/7 robot included

Year of construction: 2018, condition: used, overall weight: 10,000 kg, total length: 2,300 mm, total width: 6,500 mm, total height: 2,400 mm, BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Gusdpfozwa Rhjx Aipjh Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar Control: Siemens SINUMERIK 840D Travel Z-axis: 300 - mm Workpiece diameter over bed max.: 150 mm Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 2300 x 6500 x 2400 mm Travel X-axis: 1240 - mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Z-axis: 2,290 mm, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This Cetos BHU 50 A x 2000 features a swing diameter of 500 mm and a center distance of 2000 mm. It has a maximum grinding wheel width of 200 mm and can accommodate workpieces weighing up to 300 kg. If you are looking to get high-quality grinding capabilities, consider the Cetos BHU 50 A x 2000 machine we have for sale. Contact us for further details. - Z-Axis Travel (Longitudinal Travel): 2290 mm- X-Axis Travel (Cross Movement): > 600 mm (tested, capable of more)- Hydraulic Rapid Stroke (X-Axis): 120 mm- Max. Grinding Diameter: Minimum 500 mm- Grinding Wheel Diameter (New): 500 mm- Swing Diameter: 500 mm- Center Distance: 2000 mm- Grinding Wheel Dimensions (Diameter x Width x Bore): 500 x 80 x 203 mm- Grinding Wheel Diameter After Partial Wear: 380 mm- Minimum Ground Swing Diameter with Worn Wheel (380 mm): 70 mm- Maximum Grinding Wheel Width: 200 mm- Maximum Width of Multi-Piece Wheel Set: 200 mm- Maximum Sum of Individual Wheel Widths in Multi-Piece Set: 200 mm- Swing Diameter in Open Steady Rest: 110 mm- Swing Diameter in Closed Steady Rest: 110 mm- Taper in Workhead Spindle: MORSE 5- Taper in Tailstock Sleeve: MORSE 5- Clamping Chuck Diameter: 200 mm- Bore in Sleeve for Internal Grinding Spindle: 100 mm- Workhead Swivel Angle: +95° / -5°- Wheelhead Swivel Angle: ±45°- Upper Table Swivel Angle at 2000 mm Center Distance: +5° / -3°- Machine Weight with Standard Accessories (at 2000 mm Center Distance): 6700 kg- Workhead Spindle Speeds (Infinitely Variable): 18–112 min⁻¹ / 90–560 min⁻¹ (1st Row / 2nd Row)- Smallest Table Longitudinal Travel: 1 mm- Largest Table Longitudinal Travel (at 2000 mm Center Distance): 2290 mm- Cross Movement of Wheelhead: 415 mm- Hydraulic Rapid Traverse of Wheelhead: 60 mm- Table Speed (Infinitely Variable): 0.05–4 m/min- Cross Movement of Wheelhead per Automatic Infeed: 0.2 mm/ø- Cross Movement of Wheelhead per Automatic Infeed for Fine Grinding: 0.15 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Plunge Grinding: 0.0005–0.01 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Traverse Grinding: 0.005–0.05 mm/ø- Speed of Automatic Wheelhead Infeed During Plunge Grinding: 1 ⁻¹- Infeed Speed for Spark-Out Infeed: 0.015 ⁻¹- Total Power Requirement of Electric Motors: 16 kVA- Wheelhead Motor Power: 9.5 kW- Maximum Workpiece Weight Admitted Between Centers: 300 kg- Maximum Overhanging Workpiece Weight (Including Clamping Device): 60 kg- Table Infeed Advance: 6 m.min⁻¹ Guedpfoz E Nfhjx Aipoh

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 256 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details. • Working capacity: • Maximum swing diameter: 280 mm • Distance between centres: 1,000 mm • Capacity with open steady rest: 70 mm • Capacity with closed steady rest: 70 mm • Minimum machinable diameter with a worn Ø250 mm grinding wheel: 0 mm (applicable at a workpiece swing diameter of 250 mm) • Workhead and tailstock: • Workhead swivel range: 90° • Workhead spindle taper: Morse 4 (ISO 296-91) • Tailstock quill taper: Morse 4 (ISO 296-91) • Tailstock quill stroke: 25 mm • Tailstock centre transverse adjustment (cylindricity correction): ±0.08 mm • Tailstock clamping force: 360 N • Grinding wheel head: • Swivel range: ±45° • Total adjustment range: 270 mm • Rapid traverse travel: 0–270 mm • Rapid traverse speed: 2,000 mm/min Gusdpfx Aiszwxmzepoh • Infeed per handwheel revolution (relative to diameter): 0.1 mm • Minimum manual infeed (relative to diameter): 0.001 mm • Automatic working infeed range (relative to diameter): 0.001–270 mm • Grinding wheel: • Standard dimensions: Ø400 × 40 × Ø127 mm • Maximum wheel width: 40 mm • Axes: • X-axis travel: 256 mm

Condition: good (used), Weipert crankshaft grinding machine Weipert Grinding bench Centering chuck: Röhm 110 H MK5 Gedpfxeihfryo Aipsuh Machine length: 4300 mm You can find more grinding machines in various sizes – both new and used – in our shop! International shipping costs available upon request!

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, rotational speed (max.): 10,000 rpm, shaft diameter: 12 mm, mount diameter: 10 mm, shaft length under head: 2,000 mm, space requirement height: 3,000 mm, 5 x Pferd Mammut – Electronic Suspension Motors: In stock at Kinket SSP B.V. These suspension motors offer an excellent solution for a variety of industrial applications, such as grinding, polishing, brushing, and milling. Features of 5 x Pferd Mammut – Electronic Suspension Motors: Infinitely Variable Speed Control: The Pferd suspension motors are equipped with infinitely variable speed control, from 100 to 10,000 rpm. This allows you to select the optimal speed that suits the specific tasks and materials you are working with. This gives you complete control over your machining processes. Complete Package for Immediate Use: At Kinket SSP, we supply the used suspension motors including the necessary sliding contacts and a 12-meter-long VAHLE contact rail. Versatile: Whether you work in metalworking, woodworking, plastics processing, or other industries, these flexible shaft suspension motors offer versatility and performance that meet your requirements. Their proven track record in various applications makes them a reliable choice for a wide range of machining needs. Quality: The 5 flexible shaft machines are in excellent condition. Each machine has been carefully inspected. Summary: 5 x PFERD flexible shaft machines 5 x suspension brackets 5 x flexible shaft 12x2000mm 5 x straight handpiece 1 x 12-meter-long VAHLE contact rail These machines are fully comparable to the Suhner Rotomax suspension motors. Gsdpfxjtvfnuj Aipouh Current new price approximately: €36,000 Selling price of this well-used set: €22,000 We also have several new and used flexible shaft machines available in stock (approximately 30 units) from the brands Suhner / Biax and Pferd. If you are interested in a mobile or stationary machine, that is also possible. In addition, we also have several used and new handpieces in stock. Belt sander / angled handpiece with collet or M14, etc. Please ask us about our current inventory.

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Gsdpfszhw Ryjx Aipouh

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Gsdpfx Aozg Iqnsipsuh

Year of construction: 2015, condition: ready for operation (used), A Costa Levigatrici wide belt sanding and deburring machine is available. Working width: 1350mm, sanding units: 2, abrasive belt dimensions X/Y: 1380mm/2620mm, working height: 920mm, contact roller width: 1350mm, contact roller diameter: 200mm, roller hardness 1/2: 35Shore/80Shore, max. abrasive belt speed: 18m/s, machine dimensions X/Y/Z: approx. 2050mm/1900mm/2350mm, weight: approx. 2800kg. Documentation available. An on-site inspection is possible. Gedozlkaispfx Aipsuh

Year of construction: 2004, condition: used, Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible. Guodpfx Aisz Da Nzepsh

Year of construction: 1987, condition: used, A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible. Gujdjzxhk Espfx Aipjh

Year of construction: 2011, condition: used, Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible. Gedpez Da Nnofx Aipeuh