Used other sheet metal working machinery for sale (229)

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Lhsdpfx Ajx E Adpjlcsk

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Lhodpfx Alsy U Nqbocjk

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Ledpezfaalofx Alcohk

Year of construction: 2019, condition: ready for operation (used), Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible. Lhsdpfx Aszcyrdolcjk

Year of construction: 2002, condition: ready for operation (used), Press force: 1800kN, stroke: 300mm, strip width: 80-400mm, max. coil weight: 3t, system operating pressure: 250bar, pump drive power: 15kW. An inspection on site is possible. Lhodpfx Alsy Sncwjcek

Year of construction: 1990, condition: ready for operation (used), A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement. Lsdpfxjy Tat De Alcjhk

Year of construction: 2008, condition: ready for operation (used), A CNC punching and cutting system Finn-Power in need of repair, including an automation and stacking system STR 6, is available. Punching force: 300kN, cutting force: 250kN, max. operating pressure: 300bar, max. material thickness: 8mm, max. punching diameter: 89mm, turret stations: 20, axis speed: 150m/min, positioning speed: +/-0.1mm, repeat accuracy: +/-0.05mm, machine weight: approx. 28000kg, operating hours: approx. 40342h. The thread-cutting unit is non-functional. Documentation available. An on-site inspection is possible. Ledpjzcp T Rofx Alcehk

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Lodpfeyz Ap Rox Alcjhk

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Lhodpfx Aljwhp N Decek

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Lsdpfx Alex U Dwvjcohk

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Ljdpfxszukrqo Alcohk

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Ledpfx Aonvfdbolcjhk

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Lhedpfxjq Ewi Ae Alcjk

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Ljdoq A Un Sspfx Alcshk

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Lhodpjlzizmjfx Alcjk

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Lodsim Ixfjpfx Alcjhk

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Ledpfx Aji El Ucjlcehk

Year of construction: 1990, condition: ready for operation (used), Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible. Lhsdpfx Ajztzrfolcjk

Year of construction: 1986, condition: ready for operation (used), Max. pressing force: 400kN, stroke rate: 100-1200/min, connected load: 18kW, compressed air connection: R 1/2inch, 6-10bar, adjustable strokes: 13, 15, 19, 25, 32, 38, 44, 51, 57mm, max. fixed stroke (special version): 57mm, ram height adjustment: 60mm, tool installation height: 4 Mm 677, max. width of tool installation opening: 690mm, max. strip passage width: 190mm, strip feed height above clamping plate: 60-140mm, bed opening: 640x220mm, lower clamping plate: 4 Mm 671, upper clamping plate: 4 Mm 672, installation dimensions: 4 Mm 667, length: 1695mm, width: 2185mm, height: 3010mm, weight with feed unit: 6.37t. Equipment: drive control, tool clamping plate, installation dimensions, upper clamping plate, hand protection device, BBV 41.202/150 strip feed unit, strip-end monitoring, transport and lifting device, complete documentation, installation, operating and maintenance instructions and machine tools. An on-site inspection is possible. Ledpfx Aeztra Tslcjhk

Condition: used, Used strip layout die set from LVD Lsdpfx Aljzk Hr Socehk Upper blade: P10.12 W20 Lower die: T12 20 V12 opening (for approx. 1.5 mm) 6 x 508 mm = 3048 mm

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: MP2506992, input voltage: 400 V, total width: 960 mm, total length: 1,060 mm, total height: 2,250 mm, pressure: 200 bar, overall weight: 675 kg, stroke length: 200 mm, control voltage: 24 V, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), pressing force: 6 t, Hydraulic Clinch Press Miller MP645E, with optional vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-57KN (6 ton) Throath depth 450mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2250mm x W 960mm x D 1060mm Weight ca. 675 Kg Electrical connection 400V, 2.2 KW  Berghof PLC control system  In-house programming Ledpfx Aoztcykslcjhk  Automatic press force adjustment with counter; position-based  Memory for up to 1,000 parameter sets and 200 programs  Electronic and mechanical safety system with distance monitoring  Safety electronics by MURR & EATON  Safe processing of conductive and non-conductive materials  Linear length measurement system  Electronic (indirect) press force measurement  Proportional valves for electronic press force control  Peripherals and digital I/O by Beckhoff  Made in Germany; in-house service support Optional  Tooling set with 14 or 33 punches and dies  4-station die holder with position sensor; parameters for each of the 4 stations can be selected individually and stored in the program  Vibratory feeder for automatic transport of press-fit elements  Singulation and feed unit for automatic processing of clinch fasteners  Length measurement of automatically fed press-fit studs or bushings  Force/displacement diagram displaying the most recent press-fit data  Custom requirements—such as program selection via barcode scanning, production data output, etc.—can be programmed in-house  Adaptation to handling systems or robots possible; communication via PROFIBUS, PROFINET, EtherCAT, or Modbus We are happy to answer any questions you may have; on-site visits are possible by appointment. Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Condition: good (used), functionality: fully functional, Used flatbed die set from Wila Upper die: BIU 051 Ljdpfx Alezkt S Eecehk 5 x 515 mm 2 x 200 mm Lower die: OZU-381 4 x 515 mm Approx. 700 mm split piece V10 – for 1 to 1.5 mm New price: €7,535

Year of construction: 2008, condition: ready for operation (used), A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible. Lhsdpfszrhg Hjx Alcok

Condition: ready for operation (used), Offered is a combined Peddinghaus section shear with punch unit for punching, shearing and notching flat bar, sections and bar stock. Punching force: approx. 80t, punching capacity: 31mm in 20mm steel, throat depth: 510mm, max. round bar diameter: 50mm, max. square bar size: 45mm, max. angle iron dimensions X/Y/Z: 140mm/140mm/13mm, weight: approx. 3400kg. An on-site inspection is possible. Lodpfxszrhhdj Alcshk

Condition: good (used), Year of construction: 2009, machine/vehicle number: 67894-09, Offer 18204 Technical data: - Pole plate length 400 mm - Width 200 mm - Nominal adhesive force 150 N/cm² - Weight 35 kg Lhsdpfjumkafsx Alcjk - Space requirement W 400 x D 200 x H 60 mm