Used Tabe Agb-12 for sale (22,488)

Condition: excellent (used), Year of construction: 2015, operating hours: 6,000 h, functionality: fully functional, TOP CONDITION Dkjdpfx Aps Afi Rweijw

Condition: like new (used), Year of construction: 2012, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 01645, type of input current: three-phase, filling weight (max.): 50,000 g, filling weight (min.): 5,000 g, input voltage: 380 V, input frequency: 50 Hz, PAYPER PB-12/CG semi-automatic bagging machine for open-mouth bags, equipped with a digital electronic weighing controller EWC PLUS (EWC+). Year of manufacture: 2012. Serial number: 01645. Operating hours: 100 h. Condition: like new and fully functional. Inspection while running is possible. Gross weight weighing system: the product is weighed directly in the bag during filling. CG dispensing by gravity using a pneumatic gate, with rapid feed and fine dispensing. The operator places the bag, and the system performs the dispensing and weight control. Suitable for free-flowing products such as cereals, seeds, plastic granules, and granular fertilizers. Dkedpfx Apj Agv Rmjiow Equipment included: EWC PLUS controller, frame, conveyor belts, and bag sewing machine. Electrical power supply: 380 V three-phase, 50 Hz. Compressed air consumption: 8 liters per cycle.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 5995-001, overall weight: 800 kg, Aluminum machining center in operation. Dedpfx Aps Ah Edcsiokw

Year of construction: 2001, condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Stacking device one side feeding / also suitable for pallets. Dkjdpfxsm Dqmaj Apiew Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 8 tacts / min Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 201305503797, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,150 kg, total height: 2,800 mm, total width: 1,750 mm, total length: 2,300 mm, overall weight: 2,500 kg, Equipment: documentation/manual, - Special equipment: with ZEISS VAST XXT measuring head - Weight: CMM: 2,310 kg - Max. workpiece weight: 1,150 kg - Travel speed: Creep speed: SLOW FUNCTION: 0–5 mm/sec - Set-up mode: MAN mode 0–70 mm/sec - For further technical data, see the photographed documentation Dsdpj Ahg Nbofx Apiekw - With accessories and documentationIncluding computer, monitor and keyboard Collection: the pick up has to take place on a date to be confirmed between 13.01. and 14.01.2027. FCA-D 71364 Winnenden - loading on truck

Condition: used, functionality: fully functional, machine/vehicle number: H2Y386N00692, Year of construction: 2024, operating hours: 274 h, load capacity: 1,200 kg, lifting height: 3,745 mm, free lift: 1,868 mm, fuel type: electric, mast type: duplex, construction height: 2,496 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 3,745 mm Free lift: 1,868 mm Overall height: 2,496 mm Dodpfs Agrhlsx Apiekw MACHINE DETAILS ISO class: 2 (1,000–2,500 kg) Mast type: Duplex Fuel type: Electric Battery voltage: 24 V Battery type: Lithium-ion Operating hours: 274 h EQUIPMENT Side shifter 3rd valve External reference: SL19455SP

Condition: used, Year of construction: 2012, Number of spindles 4 St. Number of tools variabel St. Spindle diameter 50 mm Spindle length 320,320,320,160 mm WEINIG UNIVAR 12 NC AUTOMATIC PROFILING AND MILLING MACHINE ----- Machine can still be seen in operation! Includes mechanization/handling equipment.(However, it is also possible to purchase the Univar 12 without the mechanization feature.) For milling the perimeter of windows, doors, and similar items with non-uniform (varying) profiles. For profiling individual components. PROCESSING UNITS ----- 1. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Dodj Aa A Irjpfx Apiskw Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Synchronous feed device with automatic plunge function 2. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes 3. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Profile Milling Unit (vertical, right-hand side) at the end of the machine ----- Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment with 8 positions Radial indexing with 8 positions for profile milling Includes: ----- Mechanization/Handling system Control System: ----- AALTRONIC (Technical specifications as provided by the manufacturer – subject to change/no guarantee!)

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Dkjdpez Iqfbofx Apijw Price: Upon request

Condition: used, Year of construction: 2005, For wine and sparkling wine bottles Dsdpe Ahlubefx Apiskw Type: WD/ 12 capacity / hour ca.: 6000

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Dkodpfs Ad A Rzex Apiew GENERAL DATA Manufacturer: Clarks Type: C1000-3-12 Serial number: 15,215 PERFORMANCE DATA Max. lifting capacity: 1,000 kg Winch drum diameter: approx. 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,300 mm Width: 1,100 mm Height: 1,800 mm Weight: 500 kg

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Features: - Dust collector - Briquetting press Technical Specifications: Vacumobil JP 300: - Nominal airflow: 5,100 m³/h - Max. airflow: 6,000 m³/h - Pressure differential at nominal airflow: 2,700 Pa - Pressure differential at max. airflow: 2,200 Pa - Filter area: 28.0 m² - Suction inlet: 300 mm - Inlet height: 1,215 mm (centered) - Fan motor: 7.5 kW - Customer-supplied fuse: 32 A - Compressed air connection: 1" - Operating pressure: 4.5 bar - Compressed air consumption: approx. 120 NL per pressure pulse at a pulse duration of 150 ms - Sound pressure level: 75.0 dB - Weight: 900 kg CS3-12 briquetting press: Maximum throughput: 50 kg/h or 0.75 m³/h (depending on material) - Hydraulic pump motor: 3.0 kW - Agitator motor: 0.37 kW - Feeding screw motor: 0.75 kW - Customer-supplied fuse: 16 A - Briquette diameter: 65 mm - Weight: 780 kg - Feed hopper: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Footprint: 4,500 x 3,000 x 2,900 mm Available starting in June/July 2027 Dedpfe Ad Rnusx Apijkw

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 Dksdpfx Aoz Tacnepiew DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2011, machine/vehicle number: M327, Used GANGLOFF filling triblock 23000 BPHTechnical Specifications & Performance DataThis rotary Filling Monoblock CX 6/12 is engineered for high-efficiency beverage production and industrial packaging. Manufactured by Gangloff, it integrates precise filling with reliable capping to support demanding used bottling line and second hand equipment projects without compromising quality. Optimized for PET bottles and still water, the machine combines robust construction with a compact rotary footprint and neck-handling transfer for stable container control at high speeds.Manufacturer: GangloffModel: CX 6/12Year of manufacture: 2011Production speed: up to 23000 bottles/hourFiller configuration: 54 valvesCapper configuration: 13 heads (Zalkin)Current bottle format: 1.5LCompatible container material: PETNeck finish: 29/25Transfer type: Neck-handlingMachine type: RotaryWork direction: CounterclockwiseMaximum bottle height: 340 mmOperating pressure: 6 barControl platform: Schneider PLC and HMIAdvanced Automation & Control SystemsThe monoblock is equipped with Schneider PLC and HMI for stable, intuitive operation and simplified diagnostics. Automated sequences manage filling and capping synchronization, while recipe-based adjustments support quick format transitions. The neck-handling architecture reduces mechanical adjustments when switching bottle heights, enhancing uptime and repeatability. Operator interfaces provide clear status visualization and alarms to maintain consistent beverage production quality.Production Line Integration CapabilitiesDesigned for seamless integration in a complete bottling line, the machine can operate inline with upstream rinsing machines and downstream labeling, inspection, and packaging machinery. The neck-handling conveyor interface ensures gentle container transfer, minimizing scuffs and misalignment. Format flexibility centers on PET bottles with 29/25 necks, with the current setup optimized for 1.5L water. The rotary monoblock layout conserves floor space while delivering continuous, stable throughput for industrial packaging applications.Machine Condition & Maintenance HistoryThe unit is ready for operation and has been overhauled. It is supplied with compatible spare parts and includes a 6-month guarantee. Its current configuration supports immediate deployment in beverage production environments, particularly for still water in PET bottles. The maintained condition and recent service provide a reliable starting point for second hand line upgrades or capacity expansions.Operational Performance & VersatilityThis monoblock is ideal for Water production in PET containers. The 54-valve filler delivers uniform fills at high speeds, while the 13-head Zalkin capper ensures precise torque application and consistent sealing for 29/25 neck finishes. Neck-handling transfer enhances stability across tall form... Dksdpfx Apj Adt Nbjiew

Year of construction: 2003, condition: used, Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible. Dkodpfs Ahq Raex Apiow

Condition: excellent (used), Year of construction: 2010, Very well-maintained press brake from SafanDarley. Dkjdez S H Eaopfx Apisw Type EHP LS 50 15 12 CL Capacity: 1550 x 50 tons New Delem DA69T control system Y1, Y2, X, R, Z1, and Z2 are CNC controlled Hydraulic Wila New Standard upper clamping system Pneumatic Wila 13mm lower clamping system.

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 22 kW (29.91 HP), Item No. 5.4-783 1 used automatic band saw Kasto KASTO HBA A10x12, year of manufacture 2004 Roller conveyor Djdpfx Apjz Ehrysijkw Chip conveyor Coolant system Technical data: Cutting range (round) 300-1260 mm Cutting range (square) 1060x1060 mm Cutting speed (variable) 12-90 m/min Saw band dimensions 11430x80x1.6 mm Total drive power 20 kW Machine weight (approx.) 15500 kg Technical data, accessories and machine description are non-binding.

Condition: used, Year of construction: 2017, operating hours: 1,452 h, functionality: fully functional, machine/vehicle number: Roboter: 2600-107871 / Steuerung: 2600-107871, overall weight: 417 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Type B manipulator and an IRC5 Single controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 12 kg and a reach of 1850 mm. Manufactured in 2017, it has 1452 operating hours and is running RobotWare Version 6.04.01.00. It is equipped with two cable sets for power and control connections, a FlexPendant DSQC 679 teach pendant, a transport frame/mounting base located under the manipulator, and the software options World Zones, Path Recovery, and Collision Detection. Dodpszak Htefx Apijkw

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. Dedpfxsz Tac Uo Apiokw DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2017, operating hours: 13,700 h, machine/vehicle number: IntNr2316661, A CNC vertical turning center, TRAUB TNL 12, manufactured in 2017, equipped with a TRAUB TX8i-s control system and comprehensive peripherals, is for sale. The machine comes from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General technical data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of manufacture: 2017 Control system: TRAUB SYSTEM TX8i-s CNC axes: 11 axes Max. bar diameter: 13 mm Max. turning length: 130 mm Operating hours (recorded) Dodpfxo Ahfaro Apiskw Control system ON: 22,868 h Production time: 13,620 h Spindle running time: 9,945 h Main spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Counter spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Tool carrier / Machining Tool turret: 2 turrets Tool stations: 6 stations each Powered tools: on all turret stations Tool drive (turret): Up to 8,000 rpm Tool drive power: 1.5 kW (25% duty cycle) Front machining unit: 4 tool stations Rear machining unit: 4 tool stations Simultaneous machining: Depends on the number of tool carriers Equipment and peripherals Bar feeder: FMB minimag 20 CO₂ extinguishing system: Kraft & Bauer FB 703 Coolant treatment: RESY compact belt filter system Oil mist extraction: NOVA, mounted on the machine Electrical connection data Voltage: 400 V / 50 Hz / 3-phase Connected power: 16 kW / 19 kVA Rated current: 27 A The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, Industrial horizontal impact crusher/pulverizer from Kleemann & Reiner, type SHB 12/1000, for crushing mineral materials. Dkodpe Ah Du Aefx Apisw The machine is offered as a dismantled unit, including the rotor and crushing chamber. According to the seller, it was dismantled while in working condition. Visible wear and tear and rust are present. Specifications: - Steel construction with wear-resistant inner lining. - Rotor with 4 impact bar positions according to the drawing. - Adjustable impact plates with hydraulic adjustment. - Color: blue. Reported dimensions of the dismantled parts: - Crushing chamber: 215 × 175 × 220 cm. - Rotor including the bottom part: 290 × 225 × 185 cm. - Feed hopper: 300 × 170 × 150 cm. - Impact plates: 160 × 185 × 155 cm and 210 × 130 × 75 cm. - Rear part: 210 × 185 × 170 cm. Documentation: Original wear parts and construction drawings are available. Also included is an invoice dated 09-01-2024 for a complete SHB12 rotor. Offered via an online auction, lot number 8771-2. Bid amounts are exclusive of auction costs and any applicable VAT. Allocation will be made after approval by the client. Delivery via an external transport company is possible.

Condition: used, Year of construction: 1995, Capacity: 45 kg/h Pressure: 27 tons (1000 kg/cm²) Dkodpfs Aflv Njx Apisw Briquette diameter: 60 mm Motor: 5.5 kW with hopper and agitator Operating hours: 3045 h Weight: approx. 800 kg Location: Nattheim

Condition: used, Year of construction: 2021, Grinbold-Jodag Container System – 12 Modules with Interior Staircase For sale is an extensive, modular container system from the manufacturer Grinbold-Jodag, consisting of a total of 12 room modules with an interior staircase. The container system was designed as a multi-part, flexibly usable space system and is particularly suitable as an office, administrative, accommodation, or construction site facility. Due to the modular design, the individual containers can be connected and combined to form larger spatial units. Technical data Manufacturer: Grinbold-Jodag GmbH Type: Container “VARIANT” Year of offer: 2020 Number of containers: 12 units 8 containers: approx. 6,055 × 3,000 × 2,820 mm (L × W × H) 4 containers: approx. 6,055 × 2,435 × 2,820 mm (L × W × H) Interior height: approx. 2,500 mm Total modular floor area: approx. 204.3 m² Construction: Steel frame construction Color scheme: RAL 3000 Fire Red, steel components partially RAL 7024 Graphite Grey Floor covering: PVC flooring, Dark Grey 1040 Equipment and design Container construction and insulation Dedj Ahn N Hopfx Apiekw Stable steel frame construction Roof insulation with mineral wool, depending on the design, 80 or 120 mm Additional floor insulation with 100 mm mineral fiber Wall insulation with 100 mm PU insulation Interior wall coverings in white PVC flooring for commercial and industrial use Coupling and sealing material for connecting the containers Windows and doors Several plastic windows with insulated glazing Tilt-and-turn windows with roller shutters Additional toilet windows Aluminum sliding windows Steel exterior door with profile cylinder Several interior doors with steel frames Different door and window arrangements according to the original plan Interior staircase Steel interior staircase with intermediate landing Steel substructure in RAL 7024 Graphite Grey Beechwood steps Slip-resistant tread edge Handrail height approx. 1,000 mm Staircase width approx. 1,250 mm According to the original offer, designed for a permissible load of 100 people in the catchment area Electrical installation Pre-installed electrical equipment of the containers Central connection area RCD and circuit breakers 230-V sockets Partially splash-proof sockets (IP44) Switch and socket combinations LED surface-mounted luminaires Damp-proof luminaires Potential equalization between the container modules Prepared cable bushings and connection systems Possible applications The container system is suitable for, among other things: Office and administrative buildings Construction site offices and project locations Accommodation and social rooms Temporary operational buildings Training and meeting rooms Expansion of existing operating areas Condition and terms of sale The system is offered in its existing condition. The above equipment is based on the original manufacturer's offer from 2020. The actual scope of supply as well as the current condition and completeness must be checked during an inspection. Dismantling, loading and transport will be carried out after a separate agreement. An inspection is possible after prior arrangement. Subject to prior sale, changes and errors!

Condition: used, Machine: Mecamarc Optimeca rec 2962 C5 12 Mecamarc Optimeca Technical data: working direction: left-right, linear capacity bph max.: 3000 labels: self adhesive labels Dodpo Ahlhhofx Apijkw number of labelling stations: 2 speed adjusment: frequence converter

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00662, load capacity: 12 kg, arm reach: 1,650 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 2600-12/1.65 manufactured in 2015.10. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 2600-12/1.65 Model Number: IRB Year of Manufacture Robot: 2015.10 Warranty term (months): 12   Payload (kg): 12 Reach (mm): 1650 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor,Wall,Upside-down Angle Mount Weight (kg): 272   Controller: IRC5 Dkjdpfj Aax Etsx Apijw Year of Manufacture Cabinet: 2017.03 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- Dodozqggvepfx Apijkw PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...