Sheet Metal Shear

EHT TSS 4-31

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm Ffedpfx Aoxab Tvsbrot distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm Fsdpfehhc Ixsx Abrjft - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Fodpfx Abotia Hhoroft

Condition: used, Year of construction: 1982, pressure 100 t chamfer lenght . mm Ffedoq Dta Sepfx Abrot distance between columns . mm total power requirement . kW weight of the machine ca. 8 t dimensions of the machine ca. . m

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Fjdpfx Ajtqqr Robrsft Acc.: programmable back gauge, upper and lower dies, table extensions

Year of construction: 1982, condition: used, sheet width mm plate thickness mm distance between columns mm digital working width 4500 mm 8mm Ffodpfoq Dta Iox Abret total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1973, pressure 110 t chamfer lenght 3100 mm distance between columns 2600 mm stroke 150 mm dayligth 350 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 7700 kg dimensions of the machine ca. 3550 x 1800 x 2600 mm Equipment: - Electric rear stop (X-axis) - Electric depth adjustment (Y1 + Y2 axis) - 2x front support arms Fjdpew A An Nefx Abroft - Two-hand operation - Side guard - Tools

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: documentation/manual, LVD Hydraulic Shears Ffsdpewp Rxcjfx Abrst Type HSL40/12.7 Year 12: 1991 4 mm by 12 mm

Year of construction: 1997, condition: ready for operation (used), A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible. Fedpfx Ajwr Dwqebrjft

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled back stop up to 1,000 mm Side stop and table extensions Cutting length limitation Cutting edge lighting Ffjdpfx Aef Nwvfjbrst Protective fence, rollable with safety switches Weight: approx. 8500 kg