Used Accessories and spare parts milling machines for sale
12
Universal profile cutter head for 60/80mm profile knives
Leitz WM 530-1-02, bore 30mm.
5 used sets of profile knives
With BG-marking BG-Test
speed 4500 - 6000 rpm
Caorubzeqw
Sold only complete as shown and only to tradesmen, not to private individuals.
The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".
5
End mills, end mills, milling cutters, groove milling cutters, wood milling cutters
-Double cutter
Quplpb7st
-Roughing and finishing cutter
-4x: cutter Ø 4 x12 mm
-7x: cutter Ø 5 x 12 mm
-10x: cutter Ø 6 x 14 mm
-1x: cutter Ø 8 x 20 mm
-5x: milling cutter Ø 10 x 20 mm
-4x: cutter Ø 11 x 22 mm
-3x: cutter Ø 12 x 22
-Take: Ø 10 mm
-Type: M623
-Number: 34 pieces
-Sale: only completely
-Weight: 3.6 kg
4
Contour milling device with protective hood CPS/ PANHANS 1629 GAMMA V (curved milling fence)
the device is new and unused
works perfectly
is a tool recommended by the Holz- BG with CE- test seal
is similar to the Bogenfräsmaster from AIGNER
I00jbnadw
it can be used to mill e.g. contours, round or stitch arcs inside and outside, the template or the workpiece is guided at the curved routing stop, the curved routing stop replaces the stop ring and serves as a spacer to the router bit
can be used on...
4
Make Oppold
second hand
Mitmd89l
24 pcs. knife holders/slotted discs, some with slotted knives
stocked
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Handover in the current condition as seen,
without guarantee and guarantee
3
Wedge cutter with clamping bush,
25 x 180 x 50 mm,
Ffamg3r
Total length: 62 mm,
Tips partially broken.
4
Chip catcher and guard
For arc milling
With fixing screws
Mxadt8
9
Universal profile cutter head for 40mm profile knives
Leitz 1488, bore 30mm.
21 used sets of profile knives, there are good cutters, but also stäerker used among them
Zz0co
with BG-marking BG-Test
maximum speed 10000 rpm
Sale only complete as shown and only to tradesmen, not to private individuals.
The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".
5
Drill head, drill bit, milling cutter
Itubvcs2
-1x recording drawing with the photos
-Mill 5x: Ø 16 x 40 carbide tipped
-Cutter 2x: Ø 15 x 40 carbide tipped
-Cutter 2x: Ø 14 x 40 carbide tipped
-Cutter 2x: Ø 12 x 40 carbide tipped
-in wooden box
-Dimensions: 250/175/H75 mm
-Weight: 2.7 kg
4
Format 2-part HW WPL adjusting groove Z4 + V4
B3wmaml
250 x 8-15 x 30mm
n 3000 - 5000 rpm, MAN
used
Item number: KUW_G20203
3
No. 463
second hand
Make Stehle
German staff type
Dimensions 135 mm x 35 mm x 40 mm
HM
Bza29lwoym
BG test
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
2
Milling combination gold,
Total height: 120 mm, d: 40 mm,
Odngepk
profile height: approx. 37 mm,
rebate + radius,
BG Test.
10
Milling cutter jointing cutter Leuco
As good as new
7209599
00173710
43.018.02
125X25X30 Z= 2 + 2
DP n 6.100 - 10.500
Bwzo3cudq2
10
Assortment of milling cutters and various grooving discs for table mills
Small starter assortment, 9 milling heads and 5 grooving saws resp. saw blades
grooving wheels, adjustable grooving heads, profile heads, swivel cutter head, rebate heads
Mainly Leitz, but also Guhdo, Gold and Schumacher
Cxq988f
All cutters are with 30mm arbor
5 thrust rings
14 sets of profile knives for profile head
Some carbide inserts
Sold only complete as shown and only to tradesmen, not to private individuals.
The cutt...
4
Wood milling cutter inserts, knife inserts, form milling cutter inserts
-Knife width: 60 mm
-Knife thickness: 2 mm
-For milling cutters: Ø 180 mm
Qly0gdx29
-Price: complete
-Weight: 2.3 kg
6
Spare part for Copying router Knoevenagel
8 Piece
motor 1,1 kW / 2,745 U/min.
Kranc9hgp
3
No. 415/1
second hand
10 mm rebate
adjustable
Dimensions approx. 130 mm x 150 mm x 30/35 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
Bwgcqfa79h
without overhaul
without guarantee and warranty
3
Milling spindle Weinig, 0704D64, HL3/1,
Clamping length: 240 mm,
B3yr7rxypr
spindle diameter: 40 mm,
total length: 860 mm,
Diameter body: 110 mm,
pulley diameter: 70 mm.
2
6.01.1 120x45x30 n6400 -11000, fixed HM, BG Test
R12 + R5
Kdvecwfay
7
Protective cover for milling curved parts on the ring etc.
This protective device is often recommended by the BG.
Maximum milling diameter 160mm
With thrust ring, brushes and brake wedge for the thrust bearing.
Has obviously not been used much so far.
The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".
Pwsvva
4
Wood milling cutter inserts, knife inserts, form milling cutter inserts
Lideb
-Knife width: 39 mm
-Knife thickness: 2 mm
-Radius: 7.5mm
-Price: complete
-Weight: 0.8 kg
1
AUTOMATIC FEEDER type UNIVER 4 R
second hand
4 rollers
Dvjd9tj
2 + 2 speeds
volt. 380/50
3
No. 416
second hand
Phah9
Make Stark
similar to German staff
Dimensions approx. 140 mm x 40 mm x 30 mm
HSS
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul
without guarantee and warranty
3
2
7.04.1 140x50x40 HM fixed nmax9400 two-piece
Baxeskc2u
freshly sharpened
7
Slide milling cutter for table mills
Manufacturer Krebs 125 x 28mm Z3, bore 30mm. Equipment still very good, can be sharpened several times.
With BG marking MAN
maximum speed 12000 rpm
X7hi29vv
The cutters can be inspected on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".
4
Wood milling cutter inserts, knife inserts, form milling cutter inserts
Qly0pu7qa
-Knife width: 60 mm
-Knife thickness: 2 mm
-For milling cutters: Ø 180 mm
-Price: complete
-Weight: 0.8 kg
1
Code: N0003
Tenoning device with presser to block the pieces
Beb3g3fevd
2
Nr. 415
gebraucht
verstellbar
Abmessung ca. 140 mm x 11-20/14 mm x 30 mm
Lagerort 97447 Gerolzhofen, frei verladen, unverpackt
Bwgcrbuo2k
Übergabe im Istzustand wie besichtigt,
ohne Überholung
ohne Garantie und Gewährleistung
3
4.3.1 180x18,5x30 n4200 - 7200.jpg
Kc7pdltbm
3
Wood milling cutter inserts, knife inserts, form milling cutter inserts
-Knife width: 39 mm
-Knife thickness: 2 mm
-Radius: 15 mm
-Price: complete
-Weight: 0.9 kg
Ypxkyc
2
No. 2112
Dimensions 140 mm x 80 mm
Hole approx. 30 mm
Cutting width approx. 80 mm
Br07g9fmap
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
1
5.9.1 150x4x30 n52000-8900
Kdvbm2smp
5
Wood milling cutter inserts, knife inserts, form milling cutter inserts
-Knife width: 60 mm
-Knife thickness: 2 mm
C0gdrgae
-10x: left
-10x: right
-Price: complete
-Weight: 0.8 kg
4
No. 2103
double-sided for room and house doors
Make gold
Dimension 170 mm
HSS
Brzinf0qxj
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
5
Wood milling cutter inserts, knife inserts, form milling cutter inserts
-Knife width: 40 mm
-Knife thickness: 2 mm
7amp8vuf
-Price: complete
-Weight: 0.3 kg
2
No. 2101
Make Stehle
Dyiq39d
used, good condition
Dimensions 150 mm x 80 mm
HSS
40 mm bore
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
5
Wood milling cutter inserts, knife inserts, form milling cutter inserts
-Knife width: 60 mm
-Knife thickness: 2 mm
-For milling cutters: Ø 180 mm
-Price: complete
Qlyz3ssh8
-Weight: 2.3 kg
2
No. 2116
Longitudinal profile
Mat. Thickness approx. 35 mm - approx. 90 mm, adjustable in 2 parts
HSS
Br07ejkzmg
Hole approx. 40 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
5
Wood milling cutter inserts, knife inserts, form milling cutter inserts
-Knife width: 60 mm
-Knife thickness: 2 mm
-12x: left
-11x: right
-Price: complete
-Weight: 0.9 kg
Gltj9md
1
retail
Price per piece!
New
19 pieces
Diameter 5.5 mm
Stop length AL approx. 45.5 mm
Usable length approx. 14 mm
Shank D x L 9.5 mm x 20 mm
HSS
Groove width approx. 5.5 mm
Number of cutting edges 1 piece
B0meyeuxs7
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
