CATALOG NO. 6988
TECHNICAL DATA
- max diameter of machined pins 130mm
- 60mm bushing installed
- max diameter of input material 160mm
- min length of input material 800mm
- max machining allowance per side 15mm
- knife head drive motor about 18.5 kW
- 4 types of speed feed + forward / backward
- feed motor 1.5 kW
consecutively:
- 3 toothed pulling rollers
- 6-knife head (3 collecting knives, 3 smoothing knives)
- 3 smooth pulling rollers
- dimensions length/width/height 3000x1000x1420mm
- weigh...
The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm.
Dam8pq2
RM 30 – 120, RM 40 – 160, RM 80 – 200, ...
CATALOG NO. 6987
TECHNICAL DATA
- max diameter of machined pins 120mm
- 70mm bushing installed
- max diameter of input material 150mm
- min length of input material 800mm
- max machining allowance per side 15mm
- knife head drive motor about 18kW
- 8 types of feed speed + forward/backward
- feed motor 3kW
consecutively:
- 3 toothed pulling rollers
- 6-knife head (3 collecting knives, 3 smoothing knives)
- 3 smooth pulling rollers
- dimensions length/width/height 3050x1250x1600mm
- weight 2160 k...
Rounding machine tool Safo DNAA 140 for poles production. Diameter of finished material 40-140 mm. Machine was partly renovated. New head bearings, damaged bearings on main rollers were replaced as well.
Yw3na0
CATALOG NO. 6986
TECHNICAL DATA
- max diameter of machined pins 130mm
- 50mm bushing installed
- max diameter of input material 160mm
- min length of input material 1000mm
- max machining allowance per side 15mm
- knife head drive motor about 22kW
- 2 types of feed speed + forward/reverse
- feed motor 2.2 kW
consecutively:
- 3 toothed pulling rollers
- 3-knife head
- 3 smooth pulling rollers
- dimensions length/width/height 3100x1000x1450mm
- weight 2160 kg
ADVANTAGES
– Polish production
– 3-k...
Catalog No. 6821
TECHNICAL DATA
- diameter of the processed rods 11 - 60mm
- max diameter of the processed rods 60mm
on the other hand:
Rc9ft
- introduction
- metal rollers, pulling 2 pcs
- 2-knife head (61.5mm installed)
- sleeve
- 2 pulling rollers, metal
- 2 sliding rollers, metal
- 2 types + smooth feed speed adjustment + forward/backward
- replaceable tool head
- additional heads included 15 pcs
- additional feed rolls included
- feed motor 1kW
- main engine 5.5 kW
- diameter of the exhaus...
Fully renovated automatic line for rounded poles production.
Ckxp83xy
New electrical system and program , hydraulic system, pneumatic system, sensors, motors. Line is prepared for a long work.
It is possible to produce two types of pointing (4-side,cone). Material can be produced: cut/cut, chamfer/chamfer, point/chamfer. Line is already installed for test and inspection.
By request can be provided videos of full cycle or spare units.
CATALOG NO. 6850
TECHNICAL DATA
- main hole with a diameter of 160mm
- 2 knife head
- any length of processed elements
- motor about 3kW
- dimensions length/width/height 1000x600x1100mm
- weight 143 kg
ADVANTAGES
– Polish production
– used chamfer
- very good condition
Net price: PLN 6900
Net price: 1551 EUR
Cjhimrtsr2
Net price calculated according to the exchange rate of 4.45 PLN/EUR
(with larger exchange rate fluctuations, the price may change)
CATALOG NO. 6868
TECHNICAL DATA
- max diameter of processed elements 140mm
- minimum diameter of the processed elements 40mm
- a sleeve with a diameter of 100mm is installed
- 2 knife head
- any length of processed elements
- motor 2.2 kW
- diameter of the exhaust connection 120mm
- dimensions length/width/height 950x520x1100mm
- weight 95 kg
Ri7j9
ADVANTAGES
– Polish production
– a sleeve with a diameter of 100mm is included
– used chamfer
- very good condition
Net price: PLN 6500
Net price:...
CATALOG NO. 6867
Righh
TECHNICAL DATA
- main hole with a diameter of 65mm
- 2 knife head
- motor 2.2 kW
- diameter of the exhaust connection 120mm
- dimensions length/width/height 950x520x1100mm
- weight 95 kg
ADVANTAGES
– used machine
- very good condition
Net price: PLN 6500
Net price: 1398 EUR
Net price calculated according to the exchange rate of 4.65 PLN/EUR
(with larger exchange rate fluctuations, the price may change)
CATALOG NO. 6869
TECHNICAL DATA
- max diameter of processed elements 120mm
- minimum diameter of the processed elements 40mm
B3xwnz2
- a sleeve with a diameter of 120mm is installed
- any length of processed elements
- 2 knife head
- motor 2.2 kW
- dimensions length/width/height 950x520x1100mm
- weight 90 kg
ADVANTAGES
– Polish production
– technical documentation
– a sleeve with a diameter of 120mm is included
- used sharpener
- very good condition
Net price: PLN 6500
Net price: 1398 EUR
Net...
Order No. 6719
TECHNICAL DATA
- diameter of the processed bars 23mm
Bwn23ave
on the other hand:
- introduction
- metal rollers, pulling 2 pcs
- 2-knife head
- sleeve
- 2 rubber pulling rollers
- 2 rubber skid rollers
- 2 rotation speeds
- replaceable tool head
- 0.25kW feed motor
- 3.1kW main engine
- dimensions length / width / height 1070x400x1060mm
- weight 137 kg
ADVANTAGES
- unpainted
- small dimensions
- used stick, very good condition
Net price: PLN 6900
Net price: EUR 1533
Net price, ...
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.