Used durometer / material testing for sale (36)

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Iaedpfx Adjxwdxcerou Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength testing machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Ijdpszdry Ijfx Adrsau Max. test force FN in tension/compression: 2.5 kN Height (h1) approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolt) Connection values: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table-top testing machines Zwick with a maximum force of 1.0 kN. Stroke length: 1150 mm. Testing speed: 0.1 ... 1800 mm/min Iasdpfx Ajzdryzedreu Scope of delivery: (See images) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Impact hardness tester Type according to Professor Baumann Type: No.523 Operating instructions available Box has the dimensions : L.380 x W.220 x H. 95 mm Isded R Rhwspfx Adrjau Weight 5.5, kg

Condition: good (used), Year of construction: 2012, ITW BÜHLER WILSON HARDNESS TESTER SuperRockwell Hardness Testing Device BRIRO RK-Automatic Year of manufacture: 2012 Test height: 0-235 mm Throat depth: 145 mm with HM-Control evaluation system with RS-232 data interface for data transfer with settings for HR15N; HR30N; HR45N; HR15T; HR30T; HR45T used Weight: 150 kg Ijdpfjxnpvzsx Adreau

Year of construction: 1990, condition: good (used), Hardness tester, hardness tester, material testing machine make FRANK type 38533 Serial number 17024 year of construction ca.1990 test chamber height 220 mm projection 150 mm Iodpon Snkkofx Adrsau

Condition: used, functionality: unexamined, Test height 320 mm Iajdjuihh Repfx Adrou Projection 150 mm

Condition: used, brinell hardness:260 mm rockwell hardness:220 mm throat:150 mm micro head enlargement:70-fach :187,5 kg checking height:max. 250 mm weight of the machine ca.:0,25 t Iodpfxecxxzaj Adreau dimensions of the machine ca.:0,3 x 0,55 x 1,02 m semi-automatic machine for serial and single tests according to Vickers and Brunell, with projection-measuring unit on machine head, electronic load-time adjustment, shock-resistant loading via angled suspension, very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Iaodpfx Adeyc U Dberju Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm Iaedpofdzupofx Adrju testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Year of construction: 2006, Wolpert 930, year of manufacture 2006 Iajdox N Ry Hspfx Adreu

Condition: excellent (used), Wolpert DIA TESTOR 7521 Iodpox N Rw Esfx Adreau

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Iaedpfx Adsx N Rvnersu

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders Isdsyc H I Sspfx Adrjau • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 1971, brinell hardness 250 kg rockwell hardness 150 kg throat 125 mm checking height 200 mm Iodpfoy Sih Uox Adrsau weight of the machine ca. 0,07 t dimensions of the machine ca. 650 x 530 x 1550 m Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: used, Lead pressure measuring device Make Tesa Type TF WZ 1 No.20 Isdpfocrp Srsx Adreau in wooden case

Condition: good (used), Manufacturer: WMW WPM Material Testing Machines Leipzig Year of manufacture: Model: Test method: Table diameter: 200 mm Support diameter: 100 mm Throat depth: mm Test height: 300 mm Iaodpfx Adey Hka Usrju Spindle diameter: 50 mm Test force: 15.5 to 250 kg Accessories: Weight: 130 kg Footprint: 500 x 200 mm Dimensions: 500 x 300 x 730 mm Condition: good

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Iodpfx Adsit Ev Torsau Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate Iodek Egkwspfx Adreau -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Condition: used, Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected Iodpfx Adehck U Soroau -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Iaodpfsb A Rkvex Adrou Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg

Condition: good (used), Year of construction: 1978, hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Reicherter, hardness tester according to Brinell/Vickers and Rockwell on solid base Iasdpfeu Ha U Tjx Adrsu -Type: Briviskop BVR 187.5 H -Projection: 250 mm -Test height: 280 mm -Accessories: see photos -Total dimensions: 1200/700/H1730 mm -Weight: 256 kg

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Iajdpfx Adew S Hvzsrju Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: used, Year of construction: 1962, rockwell hardness . brinell hardness . Hardness tester Iaedpswugq Ssfx Adrsu Rockwell measurement with underframe table all technical data without guarantee

Condition: used, Year of construction: 1978, diameter 0 mm Iaodpfx Adjt Hwpgjrsu workpiece length 0 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Crack testing device for large series of workpieces