Condition: used, working area ca. 4500 x 1650 x 1900 mm length 5000 mm Colsuyhp Esq Nrq Tjgt width 2000 mm total power requirement 0,5 kW weight of the machine ca. 8 t dimensions of the machine ca. 5*2,5*3,2 m Coordinate measuring machine Working area: approx. 4500 x 1650 x 1900 Table 5000 x 2000 - Table top heatable / temperature-controlled

Condition: excellent (used), Year of construction: 2005, It is a precision measuring device for simple and fast measurement of through-hole drills and blind drills of burrs and end mills. This device is indispensable as basic equipment for modern tool shops, sharpening shops and CNC machine operators. The equipment is used in the woodworking and metalworking industries, as well as in glass and stone processing. Everywhere where tool inspection is required. It allows checking the dimensions of the tool its radii or profile and the quality of the cutting surfaces. - measuring range: - Z axis 370 mm - X axis 115 mm - Total weight: about 200 kg Cgolq Nrou Sbpceq Tjt

Condition: used, Year of construction: 2017, Bilz induction shrinking device ISGG3412WK-11 Technical data: Automatic cooling and drying of the holders in seconds using special "cool-down" technology, liquid cooling, cooling time 20s for tools up to 6 kg Shrinking range HM Ø 3 mm - Ø 32 mm (1.25") Shrinking range HSS Ø 6 mm - Ø 32 mm (1.25") up to HSK-A 100, SK50 max. tool length 400 mm max. cooling length 200 mm Work surface with protective cover made of black rubber, including stainless steel tool tray Dimensions (W x L x H) 800 x 560 x 1720 mm Fixed coil, 4 standard interchangeable discs Compressed air supply 4 bar Description: Device type: Floor-standing device, fully automatic Shrinking device with integrated liquid cooling, sufficient cooling servers for increased throughput thanks to large coolant tank and including graphic control panel Colevrk Hgjq Nrq Tjgt Bilz technology advantage: Fast and even heating of the shrink chuck increases its service life Contour-independent cooling protects the cutting edge User safety: heating and cooling in one position Patented ferrite disk system optimizes the heating process: only the chuck is heated, not the tool Cooling emulsion with corrosion protection for shrink chucks and tools

Condition: excellent (used), Year of construction: 2007, Zoller Venturion 450 presetting device; type: V445S3-00061 Year of manufacture: 2007 Condition: Very good Scope of offer: According to photo gallery Technical data Measuring range Z: 450 / 620 / 820 mm Measuring range X: 210 / 310 mm Max. Tool Ø: 420 / 620 mm Snap gauge Ø: 100 mm Voltage: 230 V Pneumatic: 5-6 bar Cgolq Nsrurgpjrq Tet Frequency: 50 / 60 Hz Power: < 1000 VA Weight: 300 N No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2002, table length 6000 mm table width 3000 mm daylight / mm Cjlq Nrovwgmtsq Tegt - x-Axis 6000 mm - y-Axis 1600 mm - z-Axis 2100 mm - table surface (left-right) 6000 mm - .. width 3000 mm weight 12000 kg Last Overhaul: 2017

Condition: used, Year of construction: 1987, measuring range X-axis 540 mm measuring range Z-axis 400 mm table diameter 740 mm Celotqqk Eeq Nrq Tegt enlargement 20fach range L-W-H ca. 1,70 x 1,00 x 1,70 mm weight ca. 600 kg acc.: DRO on 2 axis

Condition: refurbished (used), Functionality: fully functional, Used machine retrofitted with new CNC-controller and new 3D-geometry-software The equipment of the measuring machine is freely selectable. We procure the right components from the customer "just in time". Machine will be modernized with new controller, probe head, probes from Renishaw, PC and 3D software RationalDMIS. Technical Data: Measuring Range apprx: X = 1.000 mm - Y = 1.200 mm - Z = 600 mm Accurracy: MPEE : 1.9+L/300 according the manufacturers specification Illustrations still with original probe configuration Price on request >>> single machine - as long as available Celqjwakybs Nrq Tjgt

Condition: used, Technical details: measuring range Y-axis: Höhe: 0 - 610 mm weight: 20 kg power consumption: 43 Watt Floor Space WxD: 0,237 x 0,448 x H: 1,013 m High-precision height measuring Cgslq Nrjwa A Hmeq Tst *

Condition: used, Year of construction: 2014, measuring range X-axis 500 mm measuring range Y-axis 400 mm Cgelq Nrjvrk Haeq Tet

Condition: ready for operation (used), Year of construction: 2003, Movement Colq Nrovfywzsq Tsgt X-Axis Movement 700 mm Y-Axis Movement 650 mm Z-Axis Movement 450 mm This DEA Mistral 070705 was manufactured in 2003. A coordinate measuring machine (CMM) located in Finland, it features X-axis movement of 700 mm, Y-axis movement of 650 mm, and Z-axis movement of 450 mm. Equipped with a PH10M measuring probe and TP20 module, it operates on Windows XP Pro SP3. If you are looking to get high-quality measuring capabilities consider the DEA Mistral 070705 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: defective spare-parts repository (used), Year of construction: 1994, Functionality: not functional, Coordinate measuring machine, make Zeiss, Model Eclipse, year of manufacture 12/1994, Type Eclipse-ST: 2828-20/24 CZ0, Cslqjvfdl No Nrq Tjgt S/N: CMM941202438, X-axis 700 mm, Y-axis 600 mm, Z-axis 600 mm The control system is defective and needs to be repaired. A good opportunity for dealers who can repair the machine themselves at a reasonable price. Price significantly reduced.

Condition: ready for operation (used), Garant 44 5350 600 HC 1 Height measuring device Measuring device Technical data see picture no. 2. New price approx. 8000€ Garant granite top: Dimensions: 1200mm x 800mm x 160mm ( L x W x H ) Weight: approx. 460 kg Accuracy: Degree 0 DIN 876 New price: approx. 3200 € You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. Cjlstxn Uleq Nrq Tsgt organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2004, Condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg Cgjlqsvq Sd Rj Nrq Tet mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 00156, measuring range X-axis: 500 mm, measuring range Z-axis: 500 mm, 2006 zoller hyperion H520 HSK63 tool holder also possible add tool holder from manufacture - SK40 - 700euro Celqouvifxe Nrq Tjgt -VDI50 - 1000euro

Year of construction: 2018, Condition: ready for operation (used), Additional Equipment Optical Probe Measurement: Measurable Range: Diameter: Ø90 mm x 90 mm / Max Depth: 30 mm / Probe Tip Diameter: Ø3 mm / Contact Force: 0.015 N / Repeatability: ±2 micra / Accuracy: ±(8 + 0.02L) micra External Connections: Input: Voltage-free input (contact or non-contact) / Output: Photo-MOS output, rated at 24 V DC, 0.5 A Interfaces: LAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) / USB: USB 2.0 Type-A (6 ports: 2 front, 4 rear) Storage: Hard Disk: 500 GB Lighting System: Transmitted Light: Telecentric backlight (green LED) / Ring Light: Multi-angle lighting with 4 segments (white LED) / Flat-angle directional lighting (green LED) XY Object Table: Travel: 100 mm x 100 mm (electric) / Max Load Capacity: 5 kg / Z Object Table: Travel: 75 mm (electric) Power Supply: Voltage: 100-240 V AC, 50/60 Hz / Power Consumption: Max 430 VA This optical measurement machine was manufactured in 2018. It features a monochrome CMOS sensor, a 10.4" display, and a telecentric lens system. The machine offers a standard measurement mode with a 200 mm x 200 mm area and a precision mode of 125 mm x 125 mm. It supports a variety of external connections including LAN and USB ports. Consider the opportunity to buy this KEYENCE IM 7020 optical measurement machine. Contact us for more information about this machine. Cgslq Nevf R Anorq Tst Application Types Measuring

Condition: not inspected (used), Test facility Asys Test platform Control via contact needles 3 optical camera systems, with fixed focal length, alignment monitors, Völker FKG-4 reticle generator Vacuum pump The system cannot be inspected by us. It was taken over from running operation You are welcome to come by for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be created. Prerequisite is a valid Ust.Indent.Nr. Cjlohwrnleq Nrq Tsgt Subject to prior sale. Company names and trademarks are the property of their owners and serve only to identify and describe the products. The installation and the electrical connection of the machine / device must be carried out or checked by a trained specialist. Deviations from technical data and errors in the description of the article can happen and remain reserved. Shipping is exclusively to traders - for private consumers only a pickup is possible.

Condition: used, Year of construction: 2005, Functionality: fully functional, total height: 250 mm, total width: 80 mm, total length: 2,650 mm, Johann Fischer Aschaffenburg granite plate for measuring Celq Nrqoq Nmn Ue Tegt 2650*80*250

Year of construction: 2022, Condition: ready for operation (used), Additional Equipment Measuring Head WM 3000 USB Cable Power Supply Measuring Probe WMP3000 Probe Tip Ø 5 mm Calibration Device Tripod 3D-CAD Add-on Software Transport Case 4x Batteries for Measuring Probe This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine. Application Types Cslqevz Iquo Nrq Togt Measuring

Condition: ready for operation (used), Helios Preisser Length Measuring Machine with Camera System Colq Nrsiwxwhoq Tjgt Length x Width: 1350mm x 270mm Accuracy Grade: Grade 0 Flatness: Actual - 5.9 µ; Target - 10 µ Weight: 109 kg PC, printer, camera system, keyboard, mouse. Digital display has been checked. You are welcome to come by for a viewing. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. Names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Year of construction: 2023, Condition: ready for operation (used), Additional Equipment Operating Temperature Range: 0°C to 45°C Operating Humidity Range: 10% to 90% This SCANTECH Trackscan Sharp49 was manufactured in 2023. It is a laser measurement machine designed for precision and efficiency in various industrial applications. Consider the opportunity to buy this SCANTECH Trackscan Sharp49 laser measurement machine. Contact us for more information about this machine. Application Types Measuring Cgjlq Nrevzupwjq Tot

Year of construction: 2019, Condition: ready for operation (used), Additional Equipment Measuring head incl. 1 measuring probe with probe tip (4mm) Measuring head incl. 1 measuring probe with probe tip (4mm) CAD add-on software Extension cable Cslevz Iqnsq Nrq Tjgt Mouse, keyboard, and user manual in English and German This KEYENCE XM-1000 was manufactured in 2019. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this KEYENCE XM-1000 CMM machine. Contact us for more information about this machine. Application Types Measuring

Year of construction: 2018, Condition: ready for operation (used), General Data Measurements width 592 mm Measurements depth 1054 mm Measurements height 952 mm Cjlq Nsu S Stvorq Tsgt Machine weight 125 kg Control Unit Brand CNC MarEcon control system This optical measurement machine was manufactured in 2018. The MAHR MahrShaft SCOPE 250 plus features a high-resolution CMOS matrix camera, integrated 21" touchscreen monitor, and a CNC MarEcon control system. It supports a measuring length of 250 mm and can handle workpieces up to 100 mm in diameter and 5 kg in weight. If you are looking to get high-quality measurement capabilities, consider the MAHR MahrShaft SCOPE 250 plus machine we have for sale. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2007, Main Drive Number of axis 6 This 6-axis Faro F04 measuring machine was manufactured in 2007. It features a Faro Gage Plus Arm with a reach of approximately 1.2 meters. Ideal for precise measurements in complex applications, the Faro F04 offers robust functionality for various industries. Consider the opportunity to buy this Faro F04 measuring machine. For more information about this measuring machine, please reach out to us. Application Types Measuring Cgolq Nouttfdsrq Tst

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 3 Movement X-Axis Movement 700 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm This 3-axis Hexagon Global 07.10.07 was manufactured in 2014. A cmm machine with a measuring range of X=700 mm, Y=1000 mm, Z=700 mm, ideal for precise dimensional verification. If you are looking to get high quality measuring capabilities consider the Hexagon Global 07.10.07 machine we have for sale. Contact us for more information. Cgolqevz Ivdo Nrq Tst Application Types Measuring

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1458 Measurements depth 1082 Measurements height 2285 Machine weight 646 Main Drive Resolution 0,5 microns Movement X-Axis Movement 500 mm Y-Axis Movement 700 mm Z-Axis Movement 400 mm Workpiece Workpiece Z 590 mm Workpiece weight 180 kg Cgslq Nrqju El E Ie Tet Table Outer length 638 mm Outer width 1160 mm This cmm machine was manufactured in 2012. The Mitutoyo Crysta-Plus M574 features a measuring range of 500 mm in X, 700 mm in Y, and 400 mm in Z. It can handle a maximum workpiece height of 590 mm and a table loading of 180 kg. The machine dimensions are 1082 x 1458 x 2285 mm, weighing 646 kg. For more information about this machine, please reach out to us. Application Types Measuring