Year of construction: 2003, Condition: good (used), C30 with Heidenhain iTNC 530, travel X 650, Y 600, Z 500 mm spindle, 18,000 rpm, SK 40 DIN 69871 A, 32 tool positions, 630 mm NC swivel rotary table, tool break measurement, touch probe, new 2023 spindle head. Rapid traverse 45 m/min, 6 m/s, tandem drive A-axis ### Technical specifications of the Hermle C30 machining center (model 2003) #### General specifications - Working area (travel): - X: 650 mm | Y: 600 mm | Z: 500 mm - Accuracy: - Position measuring system: Direct, resolution 0.0001 mm - Position tolerance (VDI/DGQ 3441): 0.008 mm in X/Y/Z - Ambient temperature: 20°C ±1°C (for long-term accuracy) - Connected load: - Mains connection: 400 V/50 Hz, max. 43 kVA - Compressed air: 6 bar - Control (Pos. 30) CNC control: Heidenhain iTNC 530 - 15" TFT color flat screen - Part program memory: 6 GB - Block processing time: 0.5 ms - Ethernet interface (RJ45, 2–5 Mbps) Functions: Contour programming, thread cutting without compensating chuck, tool life monitoring --- #### Spindle (Item 30 Main spindle): - Speed: 20–18,000 rpm - Drive power: 10 kW (100% duty cycle) / 15 kW (40% duty cycle) Cgeb Edowcqizo Ulvot - Torque: 87 Nm (100% duty cycle) / 130 Nm (40% duty cycle) - Spindle taper: SK40 according to DIN 2079 - Tool holder: DIN 69871 A (draw stud according to DIN 69872 A) -- #### Tool management (Item 30 Tool magazine: 32 positions - Max. tool length: 125 mm - Max. tool weight: 8 kg - Magazine load: 128 kg   - Tool change time (chip-to-chip):      - Standard: 5.5 sec. | Dynamic version: 4.5 seconds - Balancing quality: According to DIN ISO 1940 (depending on speed and weight) --- #### Axes and drives (Item 30 Linear axes (standard version): - Feed rate: 45 m/min - Acceleration: 6 m/s² - Feed force: 7,000 N --- #### NC swivel rotary table (Item 30 Diameter: ø630 mm) - Load capacity: 800 kg - Swivel range: +30° to –115° - Accuracy: - Measuring system (C/A axis): ±2.5" - Indexing accuracy (C/A axis): ±8" - Torque: - C axis: 5,200 Nm | A-axis: 7,250 Nm - Speed: - C-axis: 65 rpm | A-axis: 25 rpm --- #### Cooling and disposal - Coolant system (item 30-0600-01):   - Tank capacity: Not specified   - Flow rate: Not specified (flow pressure required) - Chip tray (item 30-0620-01): With pull-out for emptying - Blow-off device (item 30-0630-03): 3 adjustable nozzles on Z-spindle --- #### Safety and housing - Cabin:   - Manual cabin door (item 30) Manual cabin roof (item 30 polycarbonate safety screens (item 30). Electrical heat compensation (item 30-0800-01): Automatic correction via temperature sensor. --- #### Accessories and Options - BLUM tool breakage monitoring (item 30-0800-10): For tools ≥1 mm - Chip cleaning gun (item 30-0800-12): For cleaning the work area. --- #### Color scheme - Machine bed: Mineral cast (unpainted) - Cast parts: RAL 7005 (mouse gray) - Cover panels: Stainless steel / RAL 7035 (light gray) with red stripes (RAL 3000) ---

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand HAAS Main Drive Spindle speed range 15000 RPM Spindle motor power 22.4 kW Tool taper ISO40 taper Media Chip conveyor Yes Additional Equipment Chip Conveyor: Positioned above coolant tank with auto-reverse function This 5-axis HAAS UMC-500SS universal machining centre was manufactured in 2023. It offers advanced capabilities for complex and precise machining tasks. Consider the opportunity to buy this HAAS UMC-500SS universal machining centre. Contact us for more information. Cgsbjwgp Uke Ed Ulvjt Application Types Milling

Condition: used, Year of construction: 2014, Functionality: fully functional, machine/vehicle number: Ultima-1, Cutting and machining center ULTIMA ALU Ultima ALU is an integrated cutting and machining center for aluminum profiles. Application: Machining and cutting of aluminum profiles intended for structural elements such as: windows, doors, balustrades, roller shutters, facades, light industrial structures, etc. Serial production of aluminum elements. Main advantages: • Automation - machining and cutting process integrated within a single production cycle; • Precision - a separate, independent cutting station, ensures precise cutting of profiles in the range of 43°-135°, the profile is fed to the saw using a servo-gripper, which, moving along the X axis of the machine, guarantees the identity of the measurement with the machining center; • Flexibility - 3 operating modes; if necessary, Ultima can work as an independent cutting center, machining center, or automated production center; • Production Capacity, ability to process very high profiles up to 250 mm (h) and 200 mm wide; • Economy – innovative work mode and integration of two processes (processing and cutting) allow for savings of up to 70% of working time compared to a tandem of machines; • 1 Operator – full CNC ULTIMA efficiency is provided by one operator; Csb Ejv U T Sked Ulvjgt • Total length of the set (milling machine + saw) 20m • Weight -4200 kg milling machine • number of clamps - 6 • number of places in the magazine -12 • cutting disc size - 750x6 • Software - unilink on broad 2.0.1.2 • max. length of the profile that can be milled is about 7.5m YEAR OF PRODUCTION: 2014 For additional questions, please contact 665-680-876

Condition: good (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: Mill Plus, table load: 1,200 kg, overall weight: 14,000 kg, spindle speed (min.): 12,000 rpm, Machine description: 5-axis machining center with extensive equipment and pallet changer Serviced and fully operational Current operating times: Program ON: 27,094 hours / Machine ON: 67,595 hours Travel distances and speeds: X-axis (longitudinal): 800 mm Y-axis (transverse): 800 mm Z-axis (vertical): 800 mm Feed rate in all axes: 60,000 mm/min Working table / NC rotary table: Pallet size: 800 mm x 630 mm Table load: 1,200 kg Control: Heidenhain MILLPLUS with handwheel Spindle and B-axis: Speed range: 50 – 12,000 rpm Tool holder: HSK63 Spindle power: 28 kW (S6) Torque: 121 Nm (S6) NC-controlled B-axis: +180°/-30° Coolant system and chip disposal: External coolant with nozzles: 4 bar Internal coolant: 40 bar External air: yes Internal air: yes Paper belt filter: yes Chip conveyor with scraper belt design: yes Automatic tool changer: Tool holder: HSK63 Number of positions: 60 Machine weight: Weight: ~14,200 kg Installation dimensions: 8,600 x 7,400 x 3,060 mm Other equipment and accessories: Heidenhain direct measuring system, ventilated on all axes iR probe Tool measurement with Blum laser Chip flushing gun Csb Ed Ujwd D Adolvegt Rotoclear viewing window Machine documentation

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Travels: X 1,180 mm x Y 710 mm x Z 710 mm 30-position tool magazine, internal coolant supply, chip conveyor, 5-axis manual tilting Ceb Ed Ulowgi Ttsvsgt Heidenhain TNC 430

Condition: like new (used), Year of construction: 2023, operating hours: 1,800 h, Functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, Technical Specifications: Travel: x-axis: 750 mm y-axis: 650 mm z-axis: 560 mm Main spindle: Max. speed: 15,000 rpm Rotary table: Table clamping area, fixed: 800 x 650 mm Rotary table diameter: 650 mm Cob Edjwgmifj Ulvogt Tool changer: Tool holder: HSK 63A Number of tool positions: 60 positions Rotation range: 360° Swivel range: -120 / +120° Operating hours: approx. 1,800 h Spindle hours: approx. 420 h Technical features & accessories: - Production package 40 bar, 23 l/min, 600 l tank - Rotating viewing window - Spray gun - Preparation for oil and emulsion mist separator - Cooling system with blown air through Spindle center - Heidenhain infrared measuring probe - BLUM DIGILOG FD laser tool measurement - 3D quickSET - MPC Machine Protection Control - FD automation interface for PH Cell 300 / Twin SCHUNK - 4-color signal light - Electronic handwheel - Celos energy meter - Messenger V4 Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2000, Available immediately from location: CNC machining center Mikron Type VCP 710 Year of manufacture 2000 Heidenhain TNC 426 Table 1080 x 580 mm Travel X/Y/Z 710/500/500 mm SK 40 30-station tool changer Internal coolant supply 40 bar Speeds up to 10,000 rpm Drive 20 kW Ceb Eewgixied Ulvsgt Weight 8 tons Price ex location: €7,000 plus VAT

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,337 h, General Data Machine weight 7800 kg Control Unit Model 840D Solutionline Brand SIEMENS Main Drive Number of spindles 1 Spindle speed range 12000 Tool taper SK40 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 600 mm Z-Axis Movement 520 mm B-Axis Movement +95°/-10° C-Axis Movement 360° Tools Slots in storage 30 This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions. Application Types Ceb Edswg Iimo Ulvsgt Milling

Condition: good (used), Year of construction: 2001, operating hours: 26,500 h, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, total height: 3,000 mm, total length: 3,800 mm, total width: 3,600 mm, overall weight: 8,500 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 24,000 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Control: HEIDENHAIN X-travel: 800 mm Y-travel: 600 mm Z-travel: 500 mm B-axis (table): 280 mm Table tilts +/-: 220 (+/-110) ° C-axis table rotates 360 ° Tool magazine: 30 Spindle mount: SK40 Spindle speeds - continuously variable: -16,000 rpm Large rotary table Rapid traverse speeds of rotary table: 36 rpm Integrated zero-point clamping system Internal spindle cooling 3D measuring probe: RENISHAW OMI-2 Chip conveyor Coolant system Extraction system Subject to prior sale Optional accessories (not included in the price): Approx. 100 SK40 chucks 2 NCG quick-action clamps (125 mm) Cgsb Eewg Dr Ded Ulvst 2 Gressel quick release Raisers for quick release

Condition: good (used), Year of construction: 2015, General Information • Width: 1920 mm • Depth: 2210 mm • Height: 2150 mm • Weight: 3920 kg Control • Manufacturer: Heidenhain • Model: iTNC 530 SmarT.NC Movement • X-axis movement: 500 mm • Y-axis movement: 450 mm • Z-axis movement: 400 mm • Workpiece diameter: 630 mm • Workpiece X: 500 mm • Workpiece Y: 500 mm • Workpiece Z: 350 mm Csb Ed Ulswc Rb Rjvjgt • Max. table load: 200 kg Equipment: Speed 20 to 10,000 t/min, 24 m/min rapid traverse, direct measuring systems X, Y, Z, B, C HH iTNC 530, SmarT.NC Swivel rotary table Simultaneous machining capability; D = 630 x 500 mm, 360° rotation axis, swivel range -5 to +110° Chain magazine with double gripper, 30-position, SK 40 Air blast Coolant/air blast switching Electronic handwheel Operating mode 4 5-axis package

Condition: as good as new (ex-display), MJ3 213680 - 27726 lifting gear with cubic travelling nut design and TR spindle Model: MJ3 213680 - 27726 Type: MJ3-GN-1F-KGS3220-0165-FP-BL-RP19-MG140"B(+A)"-SoFETT-2E Cgeb Ed Ujukrwgjlvjt Condition: As good as new

Condition: good (used), Year of construction: 1987, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total width: 700 mm, table width: 460 mm, SPECIAL OFFER! For sale is a lid FP3A The machine shows little wear and is very quiet even at high speeds 1998 overhauled by FPS with the software CNC 7.07 Technical data Year of construction: 1987 Angled table: Rigid angled table 700 x 460mm, max. load: 350kg (14mm T-slots 7 pcs.) Control: Lid Dialog 11 (with original training manual + control manual) Documentation: Cover FP3A spare parts plan (original) + Electrical documentation FP2A, 3A, 4A with Dialog 11 (original) Operation: CNC without mechanical handwheels (electronic handwheel included) Feed: 2 - 3600mm/min infinitely variable Rapid traverse: 4000mm/min Speed: 40 - 4000 rpm Travel: X: 400 mm/ Y: 400 mm/Z: 400 mm On request, loading and transport can be organized throughout Europe for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Cjb Edjwcnq Ns Ulvogt For further information or contact options, please visit our website

Year of construction: 2017, Condition: excellent (used), Hedelius Tiltenta 7 traveling column machining center with continuously tiltable main spindle, 5-axis CNC control, Heidenhain TNC 6, 22.00 kW/117 Nm main spindle drive, 50-12,000 rpm, 33-station +130 tool magazine, and NC rotary table integrated into the fixed machine table. Travel range X-axis V/H* *: 2600 / 2030 mm Y-axis: 750 mm Z-axis V/H: 695 / 800 mm Swivel range: 98° to +98° Rotary table: 750 mm Disturbance circle Ø: 1100 mm Cjb Ed Uowbqxyelvsgt Oscillating operation V: Left 760 mm Right 1300 mm Swivel loss: 285 / 285 mm Feed rates X/Y/Z: m/min Distance from spindle nose to machine table: Vertical spindle: 20 to 715 mm Horizontal spindle: 200 to 1000 mm V = Vertical / H = Horizontal System features: Traveling column machining center (according to EN 12417:2001+A2: 2009) with 33-station tool magazine, continuously swiveling main spindle, and a permanently installed machine table with integrated NC rotary table. Purpose: For 2D, 2D, and 3D machining of steel, gray cast iron, and metal workpieces in general mechanical engineering, fixture construction, and vehicle construction. Swivel spindle: NC-controlled main spindle with continuously swiveling features, including hydraulic clamping. Technical specifications: Swivel range: -98° - +98°* Swivel time 90°: 2.0 seconds Swivel accuracy:

Condition: ready for operation (used), Year of construction: 2019, Control Unit Model 840D SL Brand SIEMENS Main Drive Spindle speed range 12,000 Tool taper SK40 Movement X-Axis Movement 500 mm Cgjbjwg Ih Ae Ed Ulvet Y-Axis Movement 450 mm Z-Axis Movement 400 mm 1-AXIS Movement 5°/+110 2-AXIS Movement 360 Additional Equipment Renishaw touch probe 3D Quick Set PH150 EROWA clamping system. This 5-axis DMG MORI CMX50U was manufactured in 2019 and features a SIEMENS 840D SL control system. It boasts a spindle speed of 12,000 rpm and a SK40 taper, enhancing its versatility. Equipped with a Renishaw touch probe and 3D Quick Set for precision, it also includes an EROWA clamping system and a pallet size of 320x320mm, supporting a max. pallet load of 150kg. For more information about this Machining Center, please reach out to us. Application Types Milling

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, Excellent overall condition. Cob Edewgk H Ij Ulvsgt Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 ENGLISH: Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Condition: used, Year of construction: 2013, travel distance X-axis: 220 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 290 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, rotational speed (max.): 42,000 rpm, number of slots in tool magazine: 60, 5-Axis Simultaneous CNC Machining Center Ceb Ed Uswb Dx Telvjgt Manufacturer: DMG Mori Type: Ultrasonic 20 linear Year of manufacture: 2013 (commissioned 02/2014) Control: Siemens Sinumerik 840 D solutionline (PCU50) Technical specifications: X-axis: approx. 220 mm Y-axis: approx. 370 mm Z-axis: approx. 290 mm B-axis from: -5° B-axis to: 110° C-axis from: 0° C-axis to: 360° Table Clamping surface: Ø 220 mm Workpiece weight (max): 8 kg Spindle Speed: 42,000 rpm Tool holder: HSK 32 Number of tool positions: 60 Equipment: 40 bar internal coolant cooling Coolant filter for Internal coolant supply Air filter Some HSK chucks 3D probe from Renishaw Laser tool measurement from Renishaw

Condition: good (used), Used V. BAZ, DMG, type DMU 70 (3 axes) X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Csb Ed Ulowa Danovegt

Condition: used, Year of construction: 2011, Technical details: x-travel: 730 mm y-travel: 850 mm z-travel: 1100 mm control: MSX 711 MAPPS IV Spindle power: 22 / 18,5 kW Spindle RPM: 12000 1/min Tool magazine: 120 HSK-A 63 max. tool diameter: 70 mm Max. Tool dia with free space next in magazine: 140 mm max. tool length: 480 mm max. tool weight: 12 kg rapid travel x/y/z: 50.000 mm/min A-axis (5th axis) pivoting table: +30° -120° ° Rapid Rpm B-axis (rotary table): 50 1/min Rapid feed A-axis (tilt axis): 20 1/min Pallet changer 2x: 500 x 500 mm max. workpiece weight: 500 kg workpiece - installed height: 700 mm max. workpiece diameter on pallets: 700 mm total power requirement: 63 kVA weight of the machine ca.: 21 t dimensions of the machine ca.: 6,0 x 6,1 x 3,3 m Number of coordinate systems: 300 Accerories Cgjbjvb Hzxe Ed Ulvot chip conveyor spindle oil cooler Load monitor Coolant Gun Memory 1 MB Probe for tool breakage and length measuring Tool life management Registered Programs 1000 Renishaw probe (spindle) 3 dimensional Tool offset Signal lamp 3 colors Quick fixed cycles Coolant through spindle 50 bar with filter Frascara Fast state of the art 5-axis machining center with twin 500mm pallet changer, full A- and B-axis, high pressure coolant through spindle Frascara 50 bar, chip conveyor, tool length measurement and tool breakage detector. 120 tool magazine HSK-A 63, Renishaw probe. Machine is in excellent condition with little run hours. *

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 9911832, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, spindle nose: HSK F63, tool length: 150 mm, tool diameter: 20 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, The MECAL MC302 GEOS-5 5-OSI machining center, manufactured in 2014 in Italy, is designed for milling, drilling, threading and cutting profiles made of aluminum alloys, plastics and steel. The machine, equipped with high-end components and innovative solutions, performs machining both on a single working field and inside 2 separate working zones, which translates into a significant increase in the speed and efficiency of the production process. Simultaneous machining on two work zones is possible through the use of a longitudinal work area with a sliding machining station and a chip conveyor. The MECAL machining center for aluminum profiles achieves high structural rigidity, thanks to a base made of quality steel tubes. During machining, the profile is held by special clamps with an independent power system, allowing positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guides. The MECAL GEOS-5 machining center is offered with 3D software, providing a high level of programming flexibility, user-friendly operation and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile milling machine Ceb Eju Dl R Usd Ulvjgt - number of axes : 5 (X,Y,Z,A,C) - feed rate in Y/Z axis : 1570/740 mm - spindle tilt in A axis : ± 120° - spindle rotation in C axis : ± 210° - accelerated feeds in X/Y/Z axis : 70/60/40 m/1 - 3D graphics software - tool storage capacity : 18 - maximum electro-spindle speed : 24000 rpm - power of electro-spindle : 12 kW - maximum blade diameter : 500 mm - maximum diameter of side and face milling cutter : 200 mm - central lubrication

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,965 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 6000 (-15000) Tool taper SK 40 (HSK-A63) Number of axis 5 Movement X-Axis Movement 2940 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 950 mm Z-Axis Rapid Traverse 30 m/min C-Axis Movement +/-100º Cgjb Esvxl Raod Ulvst Table Table load 1200 kg Tools Slots in storage 36 Max tool diameter 85 (with adjacent free slots 135 mm) Max tool length 400 mm Additional Equipment Machines comes with C-axis and a +/-100º b-axis head. This 5-axis AXA VHC 3-3000 S was manufactured in 2006. A universal machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m With Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Cgsbsvxwuwo Ed Ulvst Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: used, Year of construction: 1997, Technical details: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm turning speed range - spindle: 5 - 5000 1/min power - main spindle: 11 kW tool taper: SK 40 tool changer: 44 Werkzeuge feed: 10 m/min surface area: 1200 x 600 mm table load: 0,5 t Cgsbovb Hzre Ed Ulvet total power requirement: 15 kVA weight of the machine ca.: 4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup. *

Condition: ready for operation (used), Year of construction: 2000, Main Drive Tool taper SK 40, SK 50, HSK-E50, HSK-A63 Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm A-Axis Movement +/- 45° / 30° C-Axis Movement n x 360° Tools Max weight 10 / 20 kg Max tool diameter 100 / 110 mm Max tool length 450 mm Additional Equipment Tool Changer with Magazine: SK 40 / SK 50: Magazine Capacity: 30 / 60 / 120 / 180 tools, HSK-E 50: Magazine Capacity: 30 tools Total Weight in Magazine: 100 / 200 / 400 / 600 kg (SK 40), 200 / 400 / 800 / 1,200 kg (SK 50) Max. Rotational Speed: 8.1 U/min Feed: 2,900 °/min// Max. Rotational Speed: A-Axis: 5.6 U/min, C-Axis: 7.1 U/min Tool Clam Swivel Range A-Axis: +/- 45° / 30° // Rotary Range C-Axis: n x 360° Tool Interface: Tapered Shank SK 40 or SK 50 according to DIN 69871, Hollow Shank HSK-E50 or HSK-A63 according to DIN 69893 T-Slot Distance (Radial): 22.5° / T-Slot Width: Direct T-Slot: 18 H7 mm, Clamping Slot: 18 H11 mm Center Bore Diameter: Ø 50 H6 mm Permissible Load on Work Tables: Fixed Table: 2,500 kg, NC Rotary Table: 2,000 kg, NC Swivel Rotary Table: 1,000 kg Main Drive Tool taper SK 40, SK 50, HSK-E50, HSK-A63 Ceb Ed Ujuh Hugolvegt Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm A-Axis Movement +/- 45° / 30° C-Axis Movement n x 360° Tools Max weight 10 / 20 kg Max tool diameter 100 / 110 mm Max tool length 450 mm Additional Equipment Tool Changer with Magazine: SK 40 / SK 50: Magazine Capacity: 30 / 60 / 120 / 180 tools, HSK-E 50: Magazine Capacity: 30 tools Total Weight in Magazine: 100 / 200 / 400 / 600 kg (SK 40), 200 / 400 / 800 / 1,200 kg (SK 50) Max. Rotational Speed: 8.1 U/min Feed: 2,900 °/min// Max. Rotational Speed: A-Axis: 5.6 U/min, C-Axis: 7.1 U/min Tool Clam Swivel Range A-Axis: +/- 45° / 30° // Rotary Range C-Axis: n x 360° Tool Interface: Tapered Shank SK 40 or SK 50 according to DIN 69871, Hollow Shank HSK-E50 or HSK-A63 according to DIN 69893 T-Slot Distance (Radial): 22.5° / T-Slot Width: Direct T-Slot: 18 H7 mm, Clamping Slot: 18 H11 mm Center Bore Diameter: Ø 50 H6 mm Permissible Load on Work Tables: Fixed Table: 2,500 kg, NC Rotary Table: 2,000 kg, NC Swivel Rotary Table: 1,000 kg This 5-axis DMG MORI DMU 125 milling machine was manufactured in 2000. It features a robust spindle system with options for SK and HSK tool interfaces, supporting diverse machining needs. The machine offers a large working area with X, Y, Z travel ranges of 1250 mm, 880 mm, and 800 mm respectively, and can handle significant loads on its various tables. Ideal for complex and precise machining tasks, the DMG MORI DMU 125 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 950 mm z-travel 1020 mm Cjb Edevxwf Ns Ulvjgt Control SIN840D sl B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 18.000 U/min power capacity at 100 % load 29,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 46,00 / 34,00 Nm spindle diameter in front bearing 70 mm tool taper HSK-A63 tool magazin: 2x 60 tool length - max. 360 / 400 mm tool diameter 68 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg Chip to chip time 4,2 sec. size of pallet 2x 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 4,00 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant system KF150, coolant high-pressure 80bar, coolant through the spindle, chip conveyor, pallet changer, RENISHAW OMP60 measuring probe, electromechanical tool length check, HT8 manual operating device, BLUM-Laser, GROB Spindle-diagnosis (GSD) workpiece pallets with ROEMHELD Speedy classic4 zero-point clamping system, integrated workpiece clamping, kinematics-set. The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2016, Control Unit Model ITNC 530 Main Drive Tool taper SK40 Number of axis 5 Movement X-Axis Movement 735 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Additional Equipment Graphite package options Mist extractor (external) This 5-axis DMG DECKEL MAHO DMU 65 monoBLOCK milling machine was manufactured in 2016. It features a robust X-Y-Z travel of 735mm, 650mm, and 550mm, and is equipped with an SK40 spindle and an ITNC 530 control system. Additionally, it includes a graphite package with an external mist extractor. Ideal for complex machining tasks, the DECKEL MAHO DMU 65 monoBLOCK machine we have for sale. Contact us for more information. Cgobsv Db Hne Ed Ulvjt Application Types Milling