Condition: ready for operation (used), Year of construction: 1998, operating hours: 19,864 h, Functionality: fully functional, machine/vehicle number: 570086, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, nominal power (apparent): 40 kVA, controller model: Heidenhain 426/430, rotational speed (max.): 12,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 3,000 h, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Our DMU 70V Evolution 5-axis milling machine is for sale. As we are restructuring, it is no longer needed. The machine is powered and can be inspected. Tools are not included in the price but can be purchased. Technical data: - Year of manufacture 1998 - Control Heidenhain 426/430 - Travel paths X,Y,Z: 710mm x 520mm x 520mm - Spindle: SK40 12000rpm with IKZ - 60-way tool changer - Blum TC50 infrared measuring probe (new in 2019, defective one included) - Chip conveyor - Electronic handwheel - 900L coolant tank - 19864 program run hours (machine is still in use, can still change slightly) In 2022 the machine got a new spindle for around €15,000. Since then it has run for around 3,000 hours. Invoice available. about the defects: - Rotoclear is defective (viewing window when water is splashed, not important) Fgjhxsvqbahoz Ag Djb - Measuring system in Y has to be approached very slowly and frequently when referenced. As soon as it has the reference point, it runs perfectly (measuring system dirty, a repair can be discussed) - some magazine positions need to be replaced (tool holders defective, new ones included) - Tool magazine should be serviced (chain tension, pick-up and drop-off position, wear parts) - Z-axis makes slight noises but still runs perfectly (a refurbished ball screw with nut is included) We have around 300 SK 40 tool holders of all kinds that can be purchased for an additional charge. Videos of the machine can be sent via WhatsApp or email. Help can be provided with dismantling. A crane for loading can be organized. Due to its age, the machine is being sold without a guarantee and as defective.

Condition: excellent (used), Year of construction: 2021, operating hours: 10,300 h, machine/vehicle number: 20210202, High-performance 5-axis machining center with 630 Schunk Rota-S Plus (manual chuck) in excellent condition, professionally cleaned for its new owner. With mist extraction on request. Fgehxz Ajtpgk Nog Dob

Year of construction: 1996, Condition: good (used), machine/vehicle number: Nr.: 171, BAZ Alzmetall 35 CNC incl. chip conveyor data see photos Fehxzjhfwq Ej Ag Dsgb Dimensions LxWxH 3700x2270x2820 mm chip conveyor 800x4000x1500 mm Function untested

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,850 mm, travel distance Z-axis: 1,000 mm, feed length X-axis: 20,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 20,000 mm, Droop & Rein Modimill built in 2001 Fidia C20 Fgehxjvk Ubxsz Ag Dsb

Condition: ready for operation (used), Year of construction: 1993, operating hours: 25,350 h, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 6,000 rpm, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, Tool breakage option included Fehxzstqfk Ns Ag Djgb 7-pallet carousel NC FANUC MF-M6

Year of construction: 2005, Condition: ready for operation (used), DESCRIPTION: Control: BOSCH – 3osa TFT color screen TECHNICAL SPECIFICATIONS Machine has double spindles, these can be moved in height independently of each other. 4 x hydraulic chucks diameter 300mm 2 x left, 2 x right with partition for pendulum operation - if required, the partition can be removed to process long parts Workspace: X axis 3500mm Y axis 600mm Z axis 700mm Drive power (40% ED) 32 kW Speed ​​range 20 – 9000 rpm Tool holder SK 40 Number of tools 2 x 36 EQUIPMENT/ACCESSORIES • Workroom full encapsulation with roof, completely closed work space; the loading doors are designed in such a way that loading with a crane is possible when open Fgshxz Aji Ikytsg Deb • Double work area lighting •Safety fence attached to machine •Coolant filter system •Internal coolant supply through the spindles, 20 bar •Flush gun •Chip conveyor •Oil central lubrication •Oil suction •Control cabinet cooling •Direct measuring systems (all axes) •3D probe with radio •Installation elements •Documentation The machine listed here is very powerful and is designed for quantities for milling and drilling work and can be inspected under power.

Condition: used, Vertical machining center Machine type: Axa VHC 3 - 3000 M Control: Heidenhain iTNC 530 Year of construction: 2002 TECHNICAL DATA: Travels: X-axis: 2,940 / 2 x 1,220 mm Y-axis: 900 mm Z-axis: 950 mm Swivel head: - 90 / + 90°, Speed range: 35 - 8,000 1/min. Drive power: 20 kW Tool holder: SK 40 Tool positions: 2 x 22 (44) Table size: 3,890 x 500 mm NC rotary table: RTA4S800 Equipment features: Chip conveyor Measuring probe: 3 D, Renishaw MP 10 E Coolant system Fgshxz Ageu E H Evo Djb Paper belt filter: SA 25/600, 20 bar Electronic handwheel: Heidenhain HR 410

Condition: good (used), Year of construction: 2014, operating hours: 22,700 h, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 0iM, coolant supply: 20 bar, number of slots in tool magazine: 40, power: 22 kW (29.91 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Powerful, reliable, top-equipped center with 400 mm Schunk manual chuck Fohxz Agstpm Rre Dogb

Condition: repair required (used), Functionality: limited functionality, runs fine in 3 axle but 4 axle rotary table says reached in drive X-axis: 880 mm Y-axis: 630 mm Z-axis: 630 mm Fast travel X-axis: 30,000 mm/min fast travel Y-axis: 30,000 mm/min Fast travel Z-axis: 30,000 mm/min Manufacturer of controllers: Deckel-Maho-Heidenhain Fohxzjuw Sv De Ag Djgb Table height: 700 mm Table length: 1,250 mm Table load: 700 kg Total weight: 8,800 kg

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm Fehxzsvtnm Hs Ag Dogb C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 1110 000026 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Working surface: 1,000 x 800 mm System: DMG Heidenhain Mill Plus Rotating table (4th axis): available X-travel: 1,250 mm Y-travel: 880 mm Z-travel: 800 mm Spindle Spindle mount: SK50 Max. spindle speed: 8,000 rpm Spindle motor power: 28 kW Pallet changer Number of pallets: 2 pieces Fohxevwb Huoz Ag Dogb Pallet size: 1,000 x 800 mm Tool magazine Number of tools: 120 pieces

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 1148000080, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-travel: 1,000 mm Y-travel: 1,000 mm Z-travel: 1,000 mm C-axis: 360° Control: MillPlus IT Heidenhain Fshsvrfnfsxz Ag Dogb Tool magazine Capacity: 60 slots Spindle Max. spindle speed: 12,000 rpm Spindle mount: SK50 DIN 69871 Table Clamping surface: 1,000 mm x 800 mm MACHINE DETAILS Total power requirement: 65 kVA Machine weight: approx. 24.5 t Space requirement: approx. 6.50 m x 5.20 m x 3.50 m EQUIPMENT - Pallet changer - Electric handwheel HR410 - 4th operating mode - BLUM Laser tool measurement - Vibration sensor - IKZ pressure level 40 and 80 bar - Rotoclear Air filter system Coolant system 980 l Chip conveyor

Condition: like new (used), Year of construction: 2023, machine/vehicle number: U2456335210135, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - Highly dynamic rotary table - Latest Machine Generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, manually operated, for manual loading/ unloading Decentralized work area mist collector 800 m³ SIEMENS SINUMERIK 840D sl machine control with GROB⁴Pilot Swivel axis calibration GSC Advanced Time-controlled start of warm-up program - programmable at the HMI Tilting table, highly dynamic rotary table (A axis) Highly dynamic rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnosis GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 105 (45+60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette ø320 mm, T-slots arranged in a star shape Pallet equipped with 4 fluid connections Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Flushing unit for the base of the work area Air gun at the work area Fehxz Agsuqiu Aj Dsgb Flush gun at the work area Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) Cooling unit for hydraulic proportional valves Additional control panel Platform at the tool magazine door Machine status lamp in the machine enclosure Preparations for use of radio signal receiver (RENISHAW) Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 120K587, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,300 rpm, Equipment: chip conveyor, documentation/manual, Machine comes from the test laboratory of a marine gearbox manufacturer and has not been a production machine, therefore it has few operating hours. An exact reading is not possible as the machine is not under power TECHNICAL DETAILS Control: Heidenhain TNC426M/410M Travel X / Y / Z: 1020 / 600 / 560 mm Spindle speed: max. 10,300 rpm Spindle torque: max. 252 Nm Milling table size: 635 x 1,200 mm Fgehxet Tdyloz Ag Djb Workpiece weight: max. 1,000 kg T-slots: 6 x 18 mm H8 Feed rate per axis: 32 m/min Tool holder: BT40 Tool magazine size: 24 slots Tool diameter / length: 88 - 125 / 300 mm Tool change time: 2.5 s Chip-to-chip time: 6 s MACHINE DETAILS Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Drive power: 39 kW Lubricant tank volume: 4L Coolant tank volume: 400L EQUIPMENT - Fully encapsulated work area with roof - Chip conveyor - Central oil lubrication - 3D probe - Handwheel

Condition: used, Year of construction: 2003, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 30.000 1/min tool taper: HSK 50 control: HEIDENHAIN iTNC 530 spindle: 20 /15 kW tool change unit: 60 pos. Fgehxz Agjp I Na Ns Deb rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, mode 4, oilmist suction, no internal coolant supply, approx. 152.000 hours "machine on", approx. 60.400 hours "spindle on" in total *

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Bar processing center with 2 angle heads, tools and accessories HIGHLIGHTS - Adjustment of the rotary angle head for 0° / 90° / 180° / 270° - Processing of profiles from the front, rear and front with 2 tools - Power-Torque milling spindle - increased torque in lower speed ranges TECHNICAL DETAILS Travel X / Y / Z: 3850 / 350 / 280 mm Max. Machining length with/without end face machining: 3650 / 3750 mm Control: E 550 Spindle speed: infinitely variable up to 21,000 rpm Cutter diameter: up to 63 mm Disk cutter diameter: up to 200 mm Spindle holder: HSK F 63 Spindle drive: 6 kW Tool change: automatic, 4 places plus angle head Rapid traverse X / Y / Z: 50 / 30 / 30 m/min MACHINE DETAILS Dimensions: 4600 x 3230 x 2420 mm Weight: 1.7 tons EQUIPMENT - Tool holder: 3 pieces - Tool measuring device - Drill chuck - Rotation angle head - Safety device light barrier Fshxz Aetrxu Tog Degb - Automatic clamp displacement - Program detects collision

Condition: excellent (used), Year of construction: 2003, x-path 350 mm y-path 240 mm z-path 340 mm Control Siemens Type 810 D Total power requirement 15 kW Machine weight approx. 1.6 t Space requirement approx. m Universal CNC tool milling machine Type DMU 35 M - 810 D Working range: X-axis (longitudinal stroke of milling slide) 350 mm Y-axis (transverse stroke of milling slide) 240 mm Z-axis (vertical stroke of table slide) 340 mm C-axis - table rotation, manual 360 ° B-axis - table swivel, manual + 105 / -15 ° Table surface (rounded) 280 x 400 mm Table load approx. 100 kg Tool holder SK 40 Spindle speeds stfl. programmable 20 - 6,300 rpm Feed values / rapid traverse stls. 20 - 5,000 mm/min. Feed drive/power 1.6 Nm AC main drive approx. 10 kW Total drive approx. 15 kW - 400 V - 50 Hz Weight approx. 1,600 kg Accessories / special equipment: - SIEMENS path control type 810 D (Processor 840 D) for interpolation in 3 Fjhxsu Rdpioz Ag Degb axes with electronic handwheel screen, swiveling control panel, SIEMENS SHOPMILL software (version 05.03.22) with additional DECKEL MAHO Programming area for quick and easy workshop programming. - Manual tool change with SK 40 holder, pneumatic tool clamping - Universal table, manually rotatable & tiltable via handwheels and digital position display position display on the control screen (rotary encoder), enables 5- side machining in one clamping operation - Complete enclosure of the machine with 2 sliding doors, unfortunately currently no coolant tank available as the machine was connected to a central system. was connected to a central system. operating instructions

Condition: good (used), Year of construction: 2003, travel distance X-axis: 6,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 6,890 mm, total height: 2,600 mm, total length: 8,000 mm, total width: 2,150 mm, overall weight: 7,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 20,000 rpm, spindle nose: ISO 30, input voltage: 400 V, power: 23 kW (31.27 HP), Aluminum machining center, ISAC SAB 2001 Emmegi control unit, color screen, incl. light barrier safety fence, some milling cutters, operating instructions Fehxzstr I Dzs Ag Dsgb

Condition: good (used), Year of construction: 2021, Matec HV 700 / 5 axles, Year of construction 2021, Heidenhain TNC 640 control system, Travel X/Y/Z 2600/700/950 mm, NC rotary table integrated in rigid table Ø 750 mm, B axis NC milling head +/- 105°, Tool changer 60 times, HSK 63 holder, Spindle speed up to 15,000 rpm, Fehxzju Ivcpe Ag Degb Total spindle hours 1950

Condition: used, Year of construction: 2015, operating hours: 7,947 h, Functionality: fully functional, machine/vehicle number: 12710000163, Maho DMU 95 monoBLOCK lid with comprehensive equipment TECHNICAL DETAILS X / Y / Z travel: 950 / 850 / 650 mm C-axis: 360° Speed: motor spindle 18,000 1/min Clamping surface C-axis table: 850 x 750 mm Clamping surface fixed table: 1,000 x 750 mm Control: CELOS® with Siemens 840D sl Operate Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool clamping: according to DIN 69872 Magazine slots: 60 (chain magazine) MACHINE DETAILS Weight: 13.7 t Connected load: 50 kVA Switch-on time: 23,422 h Spindle hours: 7,947 IKZ: 40 bar / 23 l/min through spindle center (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - 21.5 ERGOline® Control with multi-touch screen - 3D path control - Scraper belt chip conveyor with coolant system 600 liters, paper belt filter - Infrared measuring probe Renishaw PP60 optical (OMP 60) - 3D quickSET toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle center, selectable via M function - Operating mode 4 - manual intervention with open work area doors - Double switchover filter from Mahle on the coolant tank - Electrostatic air filter LTA 3000 BASIC Line 3002 year of construction 2015 - Documentation - Extensive additional accessories, e.g. 240 HSK-A 63 tool holders, long zero-point clamping system, extensive spindle tools (including - spindle tools (including Wohlhaupter), Coromant Capto system, tool cabinets, tool trolleys, etc. Fjhxz Astr D H Seg Degb

Condition: used, Year of construction: 2002, Technical details: x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm table load capacity: 600 kg control: Heidenhain iTNC 530 turning speeds: 8000 1/min tool adaptor: SK 50 tool change unit: 60 fach electr. connected load with add. coolant: 38 kVA weight of the machine ca.: 9 / 11 to. t transport measurements machine: 4 x 2,5 x 2,75 m Fshxz Agjvt Tm Es Dsgb 5 Axis simultaneously machining center, h/v-head and NC- rotary-swivelling-table dia 630mm, prepared for central internal cooling device 40 bar, prepared for IR touchprobe RENISHAW (without probe), mech. tooling breakage control device, minimum quantity lubrication (internal+external), chip conveyor KNOLL, filter mist device ILT, flush-gun, el. handwheel, approx. 43.000 h mainswich ON , approx. 24.000 h Spindle ON *

Condition: good (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, table length: 700 mm, spindle speed (max.): 12,000 rpm, 60 tool places. 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Fgohxeu S A Ansz Ag Deb Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery.

Condition: good (used), x-path 350 mm y-path 240 mm z-path 340 mm Control Siemens Type 810 D Total power requirement 15 kW Machine weight approx. 1.6 t Space requirement approx. m A N O T I O N D E C K E L M A H O Universal CNC tool milling machine Type DMU 35 M - 810 D Working range: X-axis (longitudinal stroke of milling slide) 350 mm Y-axis (transverse stroke of milling slide) 240 mm Z-axis (vertical stroke of table slide) 340 mm Fjhxz Aeullb Ujg Degb C-axis - table rotation, manual 360 ° B-axis - table swivel, manual + 105 / -15 ° Table surface (rounded) 280 x 400 mm Table load approx. 100 kg Tool holder SK 40 Spindle speeds stfl. programmable 20 - 6,300 rpm Feed values / rapid traverse stls. 20 - 5,000 mm/min. Feed drive/power 1.6 Nm AC main drive approx. 10 kW Total drive approx. 15 kW - 400 V - 50 Hz Weight approx. 1,600 kg Accessories / special equipment: - SIEMENS path control type 810 D (Processor 840 D) for interpolation in 3 axes with electronic handwheel screen, swiveling control panel, SIEMENS SHOPMILL software (Version 05.03.22) with additional DECKEL MAHO Programming area for quick and easy workshop programming. - Manual tool change with SK 40 holder, pneumatic tool clamping - Universal table, manually rotatable & tiltable via handwheels and digital position display position display on the control screen (rotary encoder), enables 5- side machining in one clamping operation - Complete enclosure of the machine with 2 sliding doors, unfortunately currently no coolant tank available as the machine was connected to a central system. was connected to a central system. operating instructions

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 11045534554, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS x-path: 500 mm y-path: 420 mm z-path: 380 mm Control system: Siemens 840 D Tool holder: HSK 63 Spindle speed: 18,000 rpm Magazine places: 32 pieces Tool length: 280 mm Tool weight: max. 6 kg Feed rate: 20,000 mm/min Rapid traverse: 50 m/min Input unit: 0.01 mm Position measuring system Resolution: 0.001 mm Position tolerance: 0.010 mm MACHINE DETAILS Machine weight: approx. 5.5 t Installation dimensions: 5400 x 6800 x 2584 mm Transport dimensions: 2295 x 2683 x 2436 mm Fgshst Hgyusxz Ag Dsb

Condition: good (used), Year of construction: 2016, Mazak Variaxis J 500 / 5 axles, Year of construction 2016, Fgohxz Aeukr Hneg Deb Mazatrol Matrix Nexus 2 control system, Travel X/Y/Z 350/550/510 mm, 2 axes NC swivel rotary table, A axis -120°/+30°, C axis 360°, SK 40 holder, 30-position tool changer, spindle speed up to 12,000 rpm, 3D measuring probe, IKZ,