Machining center

DMU DMC 60 T

Condition: used, Year of construction: 2007, used in very good condition Hedpfx Afswnqxgepspa

Condition: excellent (used), Year of construction: 2021, INDEX MS22-8 Mfd. 2021 (Commissioned 2022) Hpedpfxowt Unve Afpja Double NCU (2) Synchrons MBL Bar Feed 3.3 Meters Estimated Hours: 10,000 Contact us for full specifications

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20 Hpedpovnwfzjfx Afpea

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - spindle distance 1.500 mm turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. Hpedpfsvx U A Sox Afpsa The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 16380, CNC automatic lathe CITIZEN CINCOM L-20 VIII with Fedek STM-326 bar feeder, year 2008. Machine is fully controlled by Citizen. Supplied with geometric protocol. Hjdsw T Stzepfx Afpepa

Condition: like new (used), Year of construction: 2024, operating hours: 775 h, functionality: fully functional, grinding length: 2,000 mm, grinding width: 1,200 mm, total height: 720 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 1,100 mm, workpiece weight (max.): 3,500 kg, grinding height: 720 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 5 m/min, grinding wheel diameter: 600 mm, distance table to spindle center: 1,050 mm, table length: 2,000 mm, table load: 4,000 kg, type of input current: three-phase, table width: 1,000 mm, grinding wheel width: 150 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 5 rpm, overall weight: 36,000 kg, grinding spindle motor power: 22 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,100 mm, warranty duration: 12 months, space requirement height: 4,550 mm, space requirement length: 7,850 mm, space requirement width: 4,840 mm, Equipment: documentation/manual, rotational speed infinitely variable,  Easy-to-use Z-Control control system with high levels of comfort  Automatic vertical infeed with dressing amount compensation  Fully automatic grinding cycle with dressing cycles  Grinding cycles: • Surface grinding • Plunge grinding • Roughing / finishing / sparking  Extremely simple operation via touchscreen  Large, clearly arranged 10.4" color screen  Electronic handwheel, effective on the vertical and transverse axes, switchable in two steps to 0.001 and 0.01 mm  Gantry-style machine design for maximum accuracy  Sturdy cast iron construction of all machine components  Heavy machine weight for maximum rigidity Hodpfxswax U Tj Afpepa  Preloaded linear guide system in the vertical and transverse axes (Bosch Rexroth) for outstanding precision  Scraped double-V sliding guides in the X-axis ensures excellent damping properties and high-quality grinding results.  Hydraulic table drive with separate cooling unit to achieve good surface finishes.  Electromechanical transverse and vertical movement.  Direct measuring system in the vertical axis (Heidenhain) for precise positioning.  Rotary pulse generator in the transverse axis.  Maintenance-free belt filter system with a 2000-liter tank capacity and a 10-bar pressure pump for effective cooling and rinsing.  Integrated channel rinsing.  Upstream magnetic separator for pre-filtration.  Power supply: 400 volts, 3 phases, 50 Hz.  Continuously variable grinding spindle motor with constant cutting speed across the entire working range of the grinding wheel (vconstant).  Roller-bearing grinding spindle guarantees a long service life.  Belt-driven grinding spindle.  2 machine lights in the work area. (LED)  Table-mounted dressing device for high accuracy and surface quality with the option of mounting three diamond dressing tools  Electro-permanent magnetic chuck with integrated polarity reversal device and holding force adjustment, pole pitch p = 25 mm  Holding force adjustment in 16 steps  No heating of the magnetic chuck, therefore highly precise  Automatic central lubrication in the x-axis (slideway oil)  Automatic central lubrication in the y + z axes (grease)  Partially enclosed machine with sliding door and front-mounted service door; Open on the top left, closed on the top right with a 300 mm nozzle for extraction  Effective splash protection with good accessibility  Additional service door on the rear of the machine, including a second electronic handheld unit  Machine prepared for connection to an emulsion mist extraction system; Connection nozzle Ø = 300 mm Standard accessories Consisting of:  Grinding wheel holder  Grinding wheel 500 x 100 x 203.20 mm  Complete documentation  CE declaration of conformity  Acceptance report according to DIN 8632  Leveling elements  Balancing mandrel  Rolling stand Special accessories:  Semi-automatic grinding wheel balancing system with GAP

Condition: good (used), Year of construction: 2003, Manufacturer: DMG Gildemaster Country of manufacture: Italy CNC control FANUC 16i-TB with 7 axes CE declaration of conformity Technical data - Number of axes: 7 - Number of spindles: 2 Travel paths: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) [mm] - Travel path: 120 [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm Driven tools: Power of the tool drives: 1.1 kW Max. speed: 6,000 rpm Bar loading magazine IEMCA SMART 316 Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 [mm] Machine weight: approx. 2200 [kg] Spindle, counter spindle with new bearings! Hedpfx Aovvx H Nefpopa

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL Hpedpfxsuhar So Afpoa - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Hpedpfx Aeu Racrjfpsa Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 2 NCU 2 Syncrons 2 Y-Axis Control: Siemens Solution Line Knoll System Bar Feed: IEMCA SIR rack loader (12-ft) 22,000 on-hours 10,000-15,000 Hours Hpjdpfx Aox H H Nrefpsa