Used Veneer saws for sale (40)

Condition: good (used), Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with suction Qkrh3Pxdg

Condition: used, Year of construction: 1985, Cutting length mm Cutting height mm 7Hcdodvmg Motor output kW Dimensions (L/W/H) mm machine weight ab. kg with großer cut length 3500 mmused, good conditionmanufactured by Mayertype FSKbuilt in 1985 or 2,2 kWcut length 3500 mmsaw blade diameter ca. 180 mmpneumatic clampingrip fence with hand wheel adjustablefront extented tablerear extented tableveneer strip fence with stop fingerexhaust ductpneumatic service unitexhaust connection D 100 mmrequired space ca. l x w x h mm4400 x 1200 x 1300weight ca. 600 kgtotal connected power ca. 2,2 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck -

Condition: excellent (used), Year of construction: 1978, used, good condition Make Mayer Type FSK Year of manufacture 1978 Motor 2.2 kW Cutting length 3000 mm Saw blade diameter approx. 170 mm Pneumatic tension Parallel stop Front support table Rear support table Extraction channel Pneumatic maintenance unit Extraction connection D 100 mm Space requirement approx. LxWxH mm 3900 x 1200 x 1300 Weight approx. 450 kg Total connected load approx. 2.2 kW Chassis M9F3Rufoa Location: From warehouse 54634 Bitburg Handed over in the current condition as viewed - free loading -

Condition: excellent (used), Year of construction: 1999, Jointing saw and fine-cutting saw with jointing unit and veneer stop table A video of the machine in operation can be sent on request. For tear-free and joint-tight cutting of veneer, including thick-cut veneer Cutting length max. 3100mm Saw unit and jointing unit are combined in one unit, so that only one unit has to be moved. Saw unit is easy to guide, runs on ground and hardened shafts. The function of the jointing blade with two diamond cutting edges is comparable to that of a planing head. Rear storage table with full-length finger stop, adjustable from 2 - 50cm, with pneumatic clamping and digital display pneumatic workpiece clamping Veneer support made of wear-resistant hard plastic Drive motor 2.2kW HM-tipped fine-cutting blade Mqvfgercc Joining blade PKD-tipped Practical front veneer support Angle stop on the left Extraction connection 80mm Emergency stop switch CE mark Operating instructions On-board tool Saw blade and re-cutting blade freshly sharpened, so ready for use. Original paint, only touched up in places Dimensions of the machine approx. 4450 x 1200 x 1600mm (LxWxH) Weight approx. 700kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this supplier".

Condition: excellent (used), Veneer saw Front support table Pneumatic pressure beam control Rear table consoles with angle stop Suction channel Cutting length 4200 mm Cutting height approx. 50 mm Motor power 3.0 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 5800 x 1350 x 1200 mm Advise used machines: Cqco23Ohmi - Technical data without obligation, mistake and intermediate sale reserve. - Price is considered ex-location price - All articles or machines are bought as seen without any entitlement on warranty. - It is left to the choice of the buyer to view the machines before at its location. - Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 82110, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, saw blade diameter: 180 mm, overall weight: 400 kg, Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Weight approx. kg: 400 Dqop7T Body of the machine has been repainted (see photo).

Condition: used, Year of construction: 1994, Schnittlänge: 3000 mm Schnittiefe: 900 mm pneumatischer Druckbalken Dpo33P Anschlag mit Digitalanzeige und pneumatischer Bremse Motor 2.2 kW Lagerort: Lieferant

Condition: used, Cutting length mm Cutting height mm Motor output kW Dimensions (L/W/H) mm machine weight ab. kg 7Gntzi8Fk second handMade by ScheerType FM 2P-3000Machine no. 81394Motor 1.1 kWCutting length approx. 3000 mmpneumatic tension 1 cylinderrear support tableRequired space approx. 3600 mm x 1100 mm x 1300 mmWeight approx. 350 kgStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty

Condition: excellent (used), Year of construction: 1984, used, top condition, hardly used Make Scheer Dqmmnt Type FM5 - 3100 Year of manufacture 1984 Mach. No. 41134 Dqu3Cx Motor 1.8 kW Saw feed / handwheel Cutting length 3100 mm Saw blade diameter: 180 mm Pneumatic tension Rear support table Parallel stop Chassis Space requirement approx. 4200 mm x 1200 mm x 1200 mm Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: excellent (used), Cutting length 3100 cm 2.5 hp motor Pneumatic pressure Rvxvyrzooz With suction

Condition: used, machine/vehicle number: 650597, Motor 1,65 kW cutting length approx. 2450 mm saw blade diameter approx. 150 mm Mx2P9W pneumatic tension space requirement approx. LxWxH mm 3000 x 1000 x 1600 ex location Seevetal, subject to prior sale, sold as seen, without transport

Condition: good (used), Year of construction: 1979, Veneer saw w. planing unit cutting length 3100 mm with beautiful rear fence Gw9Nq9I

Condition: used, Functionality: fully functional, load capacity: 8,000 kg, construction width: 1,500 mm, net weight: 900 kg, Rotator Load center of gravity: 600 ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Bb0Ldywt Technical condition: very good Description: 360° endless rotation in both directions Mounting fork carriage width: FEM4 / 1200 mm Fork carriage width: 1500 mm

Condition: used, Year of construction: 1985, Cutting length mm Cutting height mm Motor output kW Dimensions (L/W/H) mm machine weight ab. kg 7Ggfl3Kc0 from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee

Condition: used, Functionality: fully functional, load capacity: 3,500 kg, Rotator Cqygshfkfw ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A (51 cm) Capacity 3500 kg Rotator 360° Width 950 mm Forks 1000 mm ID OS1497

Condition: excellent (used), Working length 350 cm Height 4 cm Blgwep9Rzbk 2.2 kW motor

Condition: like new (used), Functionality: fully functional, Panel dividing machine FM 16 - DNC- 3100 x 3100 As good as new, machine no. 33542, Küenle inverter with Stöber synchronous servo drives of the latest generation with integrated absolute encoder guarantee maximum positioning accuracy and control dynamics Hu3Pwy8 SCHEERWIN user interface and PLC program, Graphical and intuitive user interface as a document-oriented 64-bit solution under WINDOWS 10 Refurbished and repainted, 1 year warranty Angle stop left consisting of: 1 FM 16-3100 rip saw with hardened guides, with automatic forward and return movement of the saw unit (automatically lowered during return movement); by. Feed speed 2 - 40 m/min, infinitely variable via potentiometer. Return speed rapid traverse, automatically lowered. Extraction ducts in the machine base and in the pressure beam; adjustable Saw motor 7.0 kW Ritzer motor 1.1 kW (can be switched off separately) Cutting length 3100 mm, saw blade projection 80 mm. 1 material feed table HP 5021 for rear mounting on FM 16, with 6 clamping slides, driven by a Stöber servo motor. The dimensions are measured via a pulse generator and measuring rack. Dimensional resolution 0.05 mm - therefore maximum approach accuracy. Feed speed 25 m/min, table length 3100 mm, stop depth 3100 mm, 1 angle pressing device WP with pressure claw for cross sections, adjustment range for 2400 mm, fully automatic 1 SP 5000 offcut device for offcuts up to a minimum of 5 mm 1 HP 5024 angle stop table for front mounting. Machined steel angle, table support made of Pertinax. Table size 1800 x 800 mm 1 workpiece support table HP 5025 for front mounting. Table support made of Pertinax. Table size 1800 x 800 mm 1 air cushion device in the front tables HP 5024 and HP 5025 complete with radial fan incl. 1 circular saw blade KSB 4005 for saw motor, ø 305 mm, Z = 60 1 circular saw blade KSB 4006 for scoring motor, ø 200

Condition: new, Year of construction: 2024, + with automatic feeding + intuitive operation via Touchscreen + saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + cutting and milling height 45 mm + saw- and milling unit can be lifted and lowered pneumatically + front support table pneumatically adjustable - width of support: 230 mm + guiding of the saw- and millingunit via of two high precision ball-rail-systems + central lubrication points for the simple and complete maintenance of the guiding carriage + pneumatic axial saw blade adjustment, 0 – 2 mm infinitely variable M9Ejmoeww + electromotoric feed of the saw- and millingunit, (2 – 20 m/min infinitely variable) in self-holding contact + swivel switch console with rotating operating console + transparent lamella cover protects the cutting area + area of the saw and milling unit is totally fenced in metal sheets in front and at the side + power supply in cable duct with plastic link track + chipping device up to 25 mm + safety equipment

Condition: used, Cutting length mm Cutting height mm Motor output kW Dimensions (L/W/H) mm 7Filwjzy0 machine weight ab. kg used, good conditionmanufactured by Scheertype FM 8-3100Masch.-No. 83077motor 1,85 kWcut length 3100 mmsaw blade diameter ca. 160 mmpneumatic clampingrear extented tableself-exhaustrequired space ca. l x w x h mm4000 x 1000 x 1300weight ca. 450 kglocated in  97447 Gerolzhofensale in current condition as seen- free on truck -

Condition: used, Functionality: fully functional, load capacity: 3,500 kg, Rotator ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Dqnu2B Technical condition: good Description: ISO 3A (51 cm) Capacity 3500 kg Rotator 360° Width 950 mm Forks 1000 mm ID OS1482

Condition: excellent (used), Working length 250cm H0Ihib8Fe

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: 3394, - 3700 mm cutting length - milling unit - rear support table - digital position display / adjustment via hand-wheel - gear rack balance on pressure beam Btet03Sd - fence - pneumatically adjustable (autom. activated) - Touch panel - Front support table, pneum. adjustable - Fence - pneumatically adjustable – 2 steps 600/900 mm

Condition: used, Year of construction: 1970, Cutting length mm Cutting height mm Motor output kW Dq02Nh Dimensions (L/W/H) mm machine weight ab. kg used, good conditionmake Scheertype FM2 3000year of manufacture approx. 1970machine no. 102748cutting length 3000 mmsaw blade diameter approx. 180 mmrear support tablespace requirement approx. 3500 x 1000 x 1300 mmweight approx. 400 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty

Condition: used, Year of construction: 2018, Functionality: fully functional, load capacity: 3,500 kg, Rotator ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 3A (51 cm) Capacity 3500 kg Rotator 360° Width 950 mm / 1180 mm ID OS1451 Cqx8Gadds3

Condition: used, Year of construction: 1978, Cutting length mm Cutting height mm Motor output kW Dimensions (L/W/H) mm machine weight ab. kg self-extraction with dust bag, with handwheel feedused, top condition, little runmake Scheertype FM5 - 3100 Kyear of construction . 3721motor 1,8 kWsaw feed / handwheelcutting length 3100 mmpneumatic clampingrear support tablestrip fence with fence fingerrip fenceown suction with dust bagspace requirement approx. 4200 mm x 1200 mm x 1200 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Dq02I2