Used Ciata Thv-50 for sale (34,980)

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Gkedps Ahgrtofx Agled Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: Deckel Contour 12 WORK AREA Table dimensions: 800 x 480 mm Number of table slots: 7 Travel range X-axis: approx. 400 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm TOOL HOLDER Tool holder: SK 40 MACHINE DETAILS Manufacturer: Deckel Maho Model: FP3-50 Machine type: CNC milling machine Serial number: 2860-151 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 24 A Length: 3,000 mm Gksdpj Adzl Refx Aglsd Width: 2,400 mm Height: 2,400 mm Weight: 3,000 kg

Condition: used, Auction of a Binderhaus R 50! Godpfo Agvqxox Aglskd Submitting a bid obligates the bidder to collect the item on time, no later than December 23, 2026! Note: Accessories are provided without warranty. The following applies: "Item purchased as is". The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 1989, machine/vehicle number: 8803827, temperature: 100 °C, usable tank capacity: 42 l, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Design Type: Turbulent dryer (high-performance vortex mixer) Quantity: 1 Material: Stainless steel 1.4571 (316Ti) Gkodpfx Ae Ai Awgsglod Container Capacity: 65 l Usable capacity: 18–42 l Trough dimensions: ø 420 x 460 mm Inspection hatch: 345 x 195 mm Outlet: 250 x 190 mm Double jacket Double jacket capacity: 13 l Operating pressure of double jacket: 4 Temperature: max. 100 °C MACHINE DETAILS Drive Motor power: 24 kW Voltage: 380 V Dimensions and weight Footprint: 3.0 x 1.0 m Overall height: 1.9 m Weight: 1,900 kg EQUIPMENT Double jacket Vacuum operation possible Infinitely adjustable drive Motor in explosion-proof design Designed for ATEX Control cabinet (condition as inspected)

Condition: used, machine/vehicle number: W41190V00216, Year of construction: 2019, operating hours: 1,952 h, empty load weight: 1,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: up to 5,000 kg MACHINE DETAILS Drive: Electric Battery date: 2019 Battery voltage: 24 V Battery capacity: 500 Ah Rest voltage: 24.7 V Service valid until: 07/2027 UVV (occupational safety) inspection valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,400 mm Own weight: 1,000 kg Gjdo Ahrgzepfx Aglokd Operating hours: 1,952 h Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 453

Condition: used, temperature: 200 °C, rotational speed (max.): 2,915 rpm, rotor diameter: 160 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dispersing unit Rotor diameter: Ø 160 mm Mixing chamber diameter: Ø 200 mm Inlet: Ø 50 mm Throughput: max. 500 l/h Rotor speed: 2,915 rpm Material: Stainless steel 1.4552 Drive Motor power: 7.5 kW Voltage: 400/690 V MACHINE DETAILS Gkodpfx Ags Ai N Nkslod Heating Heating power: 330 W Heating voltage: 220 V Temperature: max. 200 °C Dimensions and weight Footprint: 0.6 x 0.4 m Overall height: 1.5 m Weight: 150 kg EQUIPMENT Continuous operation Electric heating Mounted on a frame

Condition: used, Year of construction: 1998, overall weight: 730 kg, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gkodpfxo Ai Ngbj Agled Screening unit Screen area: 0.55 m² Number of screen decks: 1 Screen dimensions: 1,000 x 550 mm Inlet: 590 x 250 mm Outlet: Ø 110 mm + Ø 80 mm Material: Aluminum MACHINE DETAILS Vibrating motors: 2 x 1.5 kW Dimensions and weight Space requirement: 1.6 x 1.2 m Overall height: 1.5 m Weight: 730 kg EQUIPMENT Cover Drive with vibrating motors Air purification Mounted on a steel frame

Year of construction: 1999, condition: used, operating pressure: 6 bar, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Granulation disc Disc diameter: 500 mm Inlet: Ø 150 mm Outlet: 80 x 80 mm Disc speed: 500–1,400 rpm Material: Stainless steel 1.4571 (316Ti) Gkode Ai Tiwspfx Aglod MACHINE DETAILS Operating pressure, double jacket: 6 bar Test pressure, double jacket: 7.8 bar Drive Motor power: 4.0 kW Voltage: 500 V Dimensions Footprint: 1.4 x 0.8 m Overall height: 0.9 m EQUIPMENT Lid with inlet Outlet with adjustable weir Double jacket Explosion-proof motor ATEX design Mounted on a frame Note: Without frequency inverter.

Condition: used, Year of construction: 1997, overall weight: 630 kg, temperature: 95 °C, Equipment: documentation/manual, General SKU: 057H233 Location: Barneveld CE: ✔ Manufacturer: Vötsch Industrietechnik Balingen Pressure Vacuum possible: ✔ Operating pressure plates (bar): 6 Main features Material: Stainless steel Capacity: 266 Surface area: 1.3 Specified features – Drying cabinet Drying cabinet: (1x) Non-corrosive steel plates: (1.4571) Heating surface area: 1.25 m2 Heating chamber volume: 266 liters Heating chamber dimensions: 655x735x545 mm Max. temperature: 95 °C Number of heating plates: 3 Plate dimensions: 645x645 mm Distance between plates: 135 mm Plate volume: 3 x 7.5 liters With containers: (3x) Container dimensions: 630x630x50 mm With 1 door: ✔ Material: Stainless steel General Type: VHT 65/50 Gode Ai I Tpepfx Aglokd Year of construction: 1997 Built on frame: ✔ Space requirement: 1.2 x 1.2 m Total height: 1.7 m Weight: 630 kg What you can expect from Foeth: All our machines are in working condition and are offered at a reduced price compared to new machines. They are ready for shipment to any destination worldwide. You are welcome to inspect our machines in Barneveld, the Netherlands. Please visit our Foeth website for more information about this machine.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Quantity: 18 units Tool holder: SK50 Gsdo Ad Aflopfx Aglekd MACHINE DETAILS Dimensions Length: 800 mm Width: 600 mm Height: 500 mm Weight Weight: 100 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, In excellent condition, fully functional. Gode Afi Ebopfx Aglekd

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately Gkedsyyzxhopfx Aglod - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl Mainspindle: Technology:Motorspindle Speed:7.000 rpm Power:16 kW Torque:75 Nm Bar capacity:50 mm Workpiececlamping:Collet chuck, Hainbuch Kombi Axfix Gr. 52 Gksdpfx Aj Akgabeglod Subspindle: Technology:Motorspindle Speed:7.000 rpm Power:16 kW Torque:75 Nm Workpiececlamping:Collet chuck, Hainbuch Kombi Axfix Gr. 52 Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI 25 Tooldrive:8.000 rpm, 1,5 kW, 10 Nm Movement in X/Y/Z:165/70/360 mm Rapid travers in X/Y/Z:30/15/60 m/min Toolcarrier II (X/Y/Z/B): Technology:Turret with 12 stations Taper:VDI 25 Tooldrive:8.000 rpm, 1,5 kW, 10 Nm Movement in X/Y/Z:215/70/740 mm Rapid travers in X/Y/Z:30/15/60 m/min B-Axis:-23,5°/158,5° Toolcarrier III (X/Y/Z): Technology:Turret with 12 stations Taper:VDI 25 Tooldrive:8.000 U/min, 1,5 kW, 10 Nm Movement in X/Y/Z:165/70/360 mm Rapid travers in X/Y/Z:30/15/60 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement Rawmaterialfeed:Barloader, Breuning-Irco ILS-MUK 7012 Finished-part-removal:Part catcher with conveyorbelt Toolholder:Misc. static and driven holders

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 2,500 mm, overall weight: 195 kg, total width: 882 mm, total height: 1,270 mm, Equipment: motor brake, saw blade guard, The classic 50 crosscut saw is designed for cutting semi-finished wood products. The machine consists of the following components: - cutting unit - roller tables - pneumatic or manual spacers - control and signaling device. Dimensions: 2500x882x1270 Saw motor power: 5.5 kW, saw diameter: 500 mm, saw bore: 35, saw thickness: 4.2, saw rotation speed: 2800 rpm, cutting time: 0.3 seconds. Illustrative images. Gjdpe Ai Uigefx Aglokd

Condition: used, Year of construction: 2002, functionality: fully functional, Milling machine, Strojtos_FGS-50 T-Plus. Gedpe Akc Dajfx Aglekd

Condition: excellent (used), Year of construction: 2021, operating hours: 27,790 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 9,540 h, spindle nose: HSK-A63, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling center universal Manufacturer: DMG MORI Model: DMU 50 3rd Year of manufacture: 2021 Control system: Celos with Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main Spindle: Speed range – main spindle: 20–20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Tool Changer: Tool holder: HSK-A63 Number of tool positions: 30 pos. Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 27,790 h Spindle hours: approx. 9,540 h Technical Features & Accessories: - Active spindle cooling - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 20 bar, consisting of: - 245-liter tank Godpfx Agj Ain Rnelekd - Spindle rotary joint - Chip conveyor - Cab roof - Coolant/blow-off air switch - Flushing gun for chip flushing - Infrared probe, Renishaw PP60 (if available) - Laser tool measurement - Preparation for 3D quickSET - Operating mode 4 - Electronic handwheel - PROFIBUS automation interface, automatic loading via operator door, 2-channel safety circuits - Prepared for robot-side control of the clamping system, including 4-way rotary feedthrough - Machine-side automation software interface for connection to a master computer (Siemens CMI) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information.

Condition: like new (used), Year of construction: 2023, operating hours: 140 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 14,000 rpm, operating hours of spindle: 45 h, spindle nose: BT40, number of slots in tool magazine: 60, Equipment: chip conveyor, CNC- milling center universal Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 50 2nd Complete Year of Manufacture: 2023 Control System: Celos with Siemens 840D sl Operate Technical Specifications: Travel Ranges: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm Main Spindle: Speed range – main spindle: 20 – 14,000 rpm Drive power – main spindle (100/40%): 20.3 / 14.5 kW Tool Changer: Tool holder: BT40 Number of tool positions: 60 pos. Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 140 h Spindle hours: approx. 45 h Technical Features & Accessories: - Rotary table, capable of simultaneous operations - Direct position measurement system in x, y, z, b, c Gksdpfs Ain A Isx Agljd - Internal coolant supply, 40 bar, consisting of: - Paper belt filter - 600-liter tank - Spindle rotary joint - Enclosure roof - Rotating viewing window - Rotary joint - Chip conveyor - Flushing gun for chip flushing - Coolant/blow-off air switch - Preparation for 3D quickSET - Infrared probe, Renishaw PP40 (if available) - Tool probe, Renishaw TS27R (if available) - Electronic handwheel (if available) Accessories, tools shown in the illustration, and clamping devices are included in the scope of delivery only if noted in the additional information.

Condition: used, Year of construction: 2014, operating hours: 30,222 h, functionality: fully functional, machine/vehicle number: M542-16208B3KEDAS, total height: 3,240 mm, total length: 5,055 mm, table width: 660 mm, table length: 1,500 mm, overall weight: 8,880 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 101 mm, spindle motor power: 15 W, number of slots in tool magazine: 40, Equipment: documentation/manual, The machine is available at its current location; disassembly and decommissioning will be arranged upon request. Transportation is not included in the price. This 3-axis machine, model Hurco VMX 50i, was manufactured in 2014 and features a robust work table measuring 59 x 26 inches, as well as a maximum spindle speed of 12,000 rpm. It offers a tool capacity of 40 tools and a fast tool change time (ATC) of 2 seconds. Ideal for precise, high-performance machining with a maximum table load of 4,410 lbs. If you are looking for high-quality milling performance, you should consider the Hurco VMX 50i that we have for sale. Contact us for more information. Overview • Manufacturer: Hurco • Year: 2014 • Model: VMX 50i • Production hours: 30222 • Application type: Milling • Location: Germany • Machine type: Vertical machining center Technical specifications - Hurco VMX 50i Dimensions • Machine width: 5055 mm • Machine height: 3240 mm • Machine weight: 8880 kg Additional information • Tool magazine with 30 positions • Table size: 1500 x 660 mm • T-slots: 6 x 18 mm • Maximum table load: 2000 kg • Distance from spindle nose to table: 101 mm • Maximum spindle speed: 12,000 rpm • Spindle power (15 min/continuous operation): 15 kW / 11 kW at 720 rpm • Spindle torque (15 min/continuous operation): 198.9 Nm / 116.7 Nm at 720 rpm • Tool type: CAT 40 / Big Plus® • Tool capacity: 40 • Maximum tool diameter: 76 mm • Maximum tool length: 300 mm • Maximum tool weight: 7 kg • Tool change time (ATC): 2 sec. Gksdpfxs Aid Uxo Aglod *There may be deviations between the specified data and the actual values.*

Condition: excellent (used), Year of construction: 2006, operating hours: 4,895 h, functionality: fully functional, machine/vehicle number: 11415553974, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, DECKEL MAHO DMU 50 – 5-axis CNC machining center Technical data: Manufacturer: DECKEL MAHO / DMG Model: DMU 50 Year of manufacture: 2006 Serial number: 11415553974 Control system: HEIDENHAIN iTNC 530 Axes: 5 (X, Y, Z, B, C) Travel range X: 500 mm Travel range Y: 450 mm Travel range Z: 400 mm Spindle speed: up to 8,000 rpm (manufacturer's standard, to be confirmed) Tool holder: HSK 63 NC rotary table: B and C axes Table size: 630 × 500 mm (manufacturer's specification) Maximum table load: 200 kg (manufacturer's specification) Operating hours: approx. 25,632 h Second hour counter: approx. 4,895 h Connected power: 17 kVA Operating voltage: 400 V / 50 Hz Gjdpfxe Afwhqs Agljkd Condition: Used, well-maintained appearance. Important: The machine is sold exclusively without any accessories. No tools, tool holders, or machine vises are included. Inspection possible by appointment.

Condition: good (used), Year of construction: 2009, functionality: fully functional, RCI: Remote Control Desk PressPilot Center Stream Feeder Double Sheet Control - electronic EPL (Ergonomic Plate Loading) Double Sized Impression Cylinder - Chromed Kersten Antistatic Device Feeder & Delivery Grafix: Powder Sprayer Technotrans Cooling Device Automatic Paper Thickness Adjustment Godpfx Ago Akbyqjljkd Blanket Washing Device Impression Cylinder Washing Device Impression Account: 42 Mio.

Year of construction: 2017, condition: used, Flow wrapper with a dual-lane elevator, GIRO GB-50 CL2RA2 model (year 2017). Automatic machine for heat-sealing bags. Designed for vegetables and citrus fruits, with its latest production run being avocados. It can work with 6 types of bags, including ultrabag, Girsac, Window compact, MiniBag, Handle Bag, and Girplus. It has a production capacity of up to 30 bags per minute for 1 kg formats, with 2 hours of continuous production autonomy without changing consumable rolls. Operates at 400 V on a three-phase current, at a frequency of 50 Hz. Air supply pressure of 6 bar. Touchscreen control panel with GirBagger Smart System technology. Double supports for rolls of packaging material, two 300 mm feeding guides, connected to a dual-lane elevator (100 mm per lane) with a counter for avocados or citrus fruits per unit before packaging. Up to 640 pieces/minute and 48 bags per minute. Operates at 380 V, 50 Hz, with a power consumption of 1.10 kW. Stand-alone control panel with a touchscreen HMI, stainless steel chassis, and Bonfiglioli motors. Gjdpfx Ags Ai Tgxolokd

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2050 mm Distance between uprights: 1650 mm Press force: 50 tons CNC control: DELEM DA58 graphic Controlled axes: Y; X; R1/R2 Motorized adjustable back gauge Stroke: 105 mm Overhang: 200 mm Working height: 940 mm Godpfe Ai Tdnex Agljkd Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 3.6 tons Accessories: 1 set of AMADA standard tooling Condition: The machine is in very good condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2013, Universal machining center Machine type: DMG DMU 50 Gkedo Ai Hgzspfx Aglsd Control: Heidenhain iTNC 530 HSCI Year: 2013 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes C-Axis Spindle speeds: 20 - 18.000 rpm Tool: SK 40 Toolchanger: 30 NC-panning and rotary Table Table size: 630 x 500 mm Equipment Chip conveyor No cooling through spindle Caliper Tool measurement Electronical handwheel Working mode: 4

Condition: not inspected (used), Year of construction: 2012, manufacturer brand DMG MORI SEIKI type DMU 50 ecoline manufacturing year 2012 serial number Gksdpfe Ai Hy Eox Aglsd 1536580533A condition Used operating hours 35.520 spindle hours 20.176 description Travel paths (X/Y/Z): 500/450/400 mm, max. spindle speed: 8,000 rpm, 16-position tool changer, SK40 tool holder, weight: 4,000 kg, HEIDENHAIN Slimline control/operating terminal, T-slot clamping table, chip conveyor Saeid WhatsApp

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 5.7 kW (7.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, actuation type: manual, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 800 mm, table length: 1,200 mm, overall weight: 700 kg, Table milling machine, type F 50 - Year of manufacture: 1977 - 3,400, 5,000, 6,000, 8,000, 10,000 rpm - Clockwise/counterclockwise rotation - Milling spindle: 30 mm - Clamping length: 140 mm - Wood fence with fine adjustment, rotatable - Table size: 1200 x 800 mm - Weight: 700 kg - with Holz Her 3-roller feed unit - Good condition - Machine has been inspected - Subject to differential tax Godpfx As Ah Tcuoglekd