Condition: used, OTT Tornado FÜ + PU SPS-compatible control, 7" TFT touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit – jointing Fully automatic roller magazine Fully automatic edge magazine Pneumatic flush trimming 0–3° Flush milling – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof cabin with room extraction Cleaning set with spray unit, fine buffing device, and glide agent spraying unit – PU First delivery 2008 Machine is FACTORY REFURBISHED in TOP CONDITION Hnjdpext N E Hsfx Ah Usw Available from stock Lieboch

Condition: excellent (used), Year of construction: 2005, Edge banding machine Brandt KDF 530 c with jointing, corner copying, two scraper blades, and Riepe spray units. A video of the machine in operation can be provided upon request. Machine is highly automated Edge thickness approx. 0.4 - 8 mm Workpiece height approx. 10 - 50 mm Feed speed approx. 11 m/min Soundproof hood Extendable workpiece support Extraction connection 1 x 200 mm, 1 x 100 mm including the piping shown PC16 control with color display for easy machine operation Hnodpfx Ahjxd Duds Uow Units: - Top pressure manual adjustment with SIKO counter - Infeed fence manual adjustment with SIKO counter - Riepe separating agent spraying unit - Joint milling unit with Leitz Whispercut diamond cutters, sharpened - Gluing unit switchable for drag/counter rotation - Pressure zone with 3 rollers - Trimming saw with 2 motors, for straight or beveled cuts (programmable adjustment) - Combination milling unit with motorized lateral adjustment - Radius scraper R2, pneumatic adjustment - Corner rounding cutter R2 with 1 diamond cutter, motorized, pneumatically adjustable between thin and thick edges - Glue joint scraper, pneumatically retractable with large roller - Riepe cleaning agent spraying unit - Buffing unit Other features: - Hood locking - CE mark - Operating manual as folder and on CD All reversible knives of the milling and scraper units have been replaced or rotated, saw blades sharpened, joint cutters sharpened, buffing discs replaced. The machine is therefore ready for immediate use. Only the diamond cutter of the form milling unit was not renewed, but is still sharp. Minor paint touch-ups on small damages. Approx. 3,500 operating hours. The machine’s condition speaks for itself. Occasionally, the computer reboots during operation (mainly at high ambient temperatures), but this has not been an issue for us; operation can continue during the reboot. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1,900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see 'more offers from this supplier.'

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Hsdpfsxgrfpox Ah Usnw Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: excellent (used), Year of construction: 2004, used Hebrock edge banding machine model top 2000 year of manufacture 2004 with hot melt adhesive application to the workpiece Hnodpfexvqrmjx Ah Usw for edge material up to 3 mm, maintenance-free glue pot, HF end trimming station (18,000 rpm) HF milling station (18,000 rpm) with replaceable insert cutter (combination version), feed rate approx. 10 m/min extendable workpiece support length approx. 3100 mm

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Hsdpfsw S E Rqex Ah Ujnw

Condition: new, Catalogue No.: HZ014 – Pre-milling Hnodpfx Ajvviz Doh Uew – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Edgebanding machine HolzHer 1321, in very good working condition, regularly in use, edgebanding programs available, robust industrial machine - Pre-milling unit/jointing with spare DIA cutter - Glue application unit, upgraded a few years ago to continuous slot nozzle, pressure section - Glue height and edge thickness fully controllable via display, compatible with cartridge or granulate, PU glue possible - Panel preheating - Separate top and bottom pre-milling units - Motorized rounding unit, adjustable for 2 mm radius - Straight/angled end trimming - Radius scraper - Corner copying unit - Flat scraper - Buffing unit Hodpfxexiv Efs Ah Ujnw Offered in ready-to-use condition. Still regularly in use until approx. week 42/43, testing is welcome.

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths Hnodpswkbd Esfx Ah Ujw - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2025, Pre-milling unit: yes Hedpfx Ahol D Rx Ue Ujnw Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Type: Edgebander - single sided Manufacturer: BRANDT Model: Optimat KDF 550 C Year: 2008 Location: Lithuania Terms: as-is where-is Board thickness 60 mm Edge thickness 8 mm Feed advance 11 m/min Length x width x height 5860.0 × 1560.0 × 230.0 Weight 2600 kg Feed speed: 11 m/min Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm Electricity supply: 400 v – 3 phase – 50 hz / pneumatic pressure: 6 bar / noise emission level: 80…87 db(a) Extraction diameter: 1 × 120 mm / 2 × 100 mm / roll separation: max. 3. 0 × 45 mm / 0. 8 × 65 mm Hodpfoxwwb Rox Ah Uenw

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately - Hedpfx Asv Sm Hceh Usnw

Condition: good (used), Year of construction: 2013, Cartridge system (for rolls and strip material) Reinforced cutting cylinder Hsdpfjxqy Elsx Ah Ujnw Cutting unit Multi-function milling station (chamfer-flush-radius) Pull scraper Edge thickness 0.3–3 mm External dimensions L x W x H approx. 3060 x 1040 + magazine plate overhang) x 1350 mm All information without guarantee; data obtained from a brochure.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Hnodpfxexfh Tme Ah Ujw Storage location: Nattheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Hnedpfx Aev Sv Eneh Usw Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: new, Year of construction: 2025, Gluing unit: Yes Edge thickness: maximum 3 mm Workpiece thickness: 8 mm - 50 mm Workpiece width: min. 110 mm Glue pot: granulate, quick-change pot End trimming shears: yes Hjdpfx Ahexrbibj Usnw End trimming / flush cutting: yes Milling station: chamfer / radius Flat scraper blade: yes Radius scraper blade: yes Infeed fence adjustment: manual Workpiece thickness adjustment: manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 623 kg

Condition: excellent (used), Year of construction: 2011, Edge banding machine for edging and post-processing of panel materials Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm Max. 15 mm possible with tool change on the milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless 10 - 20 m/min Control unit PPC 221 – with 8.4" VGA color screen Motorized adjustment of the infeed fence, adjustable via control unit Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feed 1901 SYNCHRO Automatic feeding of roll and strip material Glue application system Glu Jet GJ301 automatic Automatic glue height adjustment (contact nozzle) Glu Jet hybrid technology – for processing EVA and PUR adhesives Glue application via nozzle technology Heat-up time: 3 minutes Glue granulate container 5 kg for GJ301 PRESSURE UNIT – Pressure section 1914-1 MOT END-TRIMMING UNIT – End-trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic swivel function 0/10° for coils and strips MULTIFUNCTIONAL END-TRIMMING UNIT End-trimming unit 1826 MOT4 (2 x 0.65 kW) Hnjdpfexggmbox Ah Uow with 4 NC servo drives for flush, radius, and chamfer cuts CORNER ROUNDING UNIT Profile milling unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12000 rpm) Milling the top and bottom longitudinal edges, copy milling of the upper and lower front and rear longitudinal edges, corner rounding, postforming of corners with 4 adjustment motors SCRAPING UNIT 1927 MOT5 Carbide reversible blades for scraping knives 1929 R = 2.0 mm (2 pieces required) FLAT SCRAPER 1964 For removing excess glue to achieve a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs GROOVING UNIT 1841 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Condition: used, machine/vehicle number: 008107, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 310/9/A20/S2 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 310/9/A20/S2 Hsdpjw U Rqzjfx Ah Usnw

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Features and technical data: Factory overhauled by Lange Maschinenbau Minimum workpiece width: approx. 75 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: approx. 120 mm / 180 mm when corner copying Edge thickness: 0.4 - 2 mm Jointing unit chip removal: 0 - 2.0 mm, stepless adjustment Jointing unit with 2 counter-rotating, individually controlled jointing heads Diamond tools, height = 55 mm Direct glue application to the workpiece Glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Hedpfx Aew Sbblsh Ujnw End trimming station with high-frequency motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner copying unit Surface scraper unit Extraction duct system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: Immediately Location: Austria Condition: Like new Year of manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebander for small and medium-sized enterprises, capable of processing a wide range of materials to high quality standards in a compact footprint. The SCM Olympic 500 features electronic adjustment devices and allows for the processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the human-machine interface (HMI) • Maestro connect: Prepared for later installation without gateway • Dual-radius processing, beveling on all units with multi-blade tooling: - Fine-trimming and radius scraper unit, radius = 1 mm - Fine-trimming and radius scraper unit, radius = 2 mm • Electronically positioned pressure beam Hsdpfx Asq A Tyzeh Ujnw OPTIONAL EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Cabin and edgebanding area internal lighting “Nesting” tracing roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing milling unit “RT-V1” “EASY SIZE” device – electronic quick adjustment for jointing milling unit Glue pot “VC-VM” Ceramic infrared lamp for workpiece preheating Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic changeover between straight/radius/radius positions for “Round 2-A Multiedge 1R” unit Radius scraper unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Hnodpfxowuz E Rs Ah Usw Operating Units: 9 nr

Condition: used, Year of construction: 2014, Used machine Hjdpfx Ahsw Nadte Usnw Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Hnjdpfovw Ev Hox Ah Uew Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Hnodpfx Aoxtugceh Ujw Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274

Condition: used, machine/vehicle number: 008105, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Hjdpfx Ajw Idgpjh Usnw Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Hjdpfxewgktne Ah Ujnw Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr