15
pre milling unit
granules gluing unit
pre cutting unit
pressure rolls
precise cutting saws - linear
milling unit with straight tools
milling unit with radius tools
corners copying
Br0f7khp0j
profiled cycline
straight cycline
polishers
additional PU gluing unit
machine will be available in October 2021
3
Single-sided machine for aligning and edging narrow surfaces in boards, and processing various types of edges fed from the roll and in sections, as a straight edge in the longitudinal and transverse process, including processing of corners.
Automatic changeover from radius to chamfer and various edge and workpiece thicknesses.
EQUIPMENT:
B2gnucgnyn
- SPRAY OF NON-STICK FLUID
- PRE-MILLING UNIT
- GLUING UNIT A20 - WITH 2 GLUE ROLLS
- DRIP FEED UNIT HL84
- EDGING EXCESS MILLING UNIT UP, DOWN
- COR...
11
Suitable for roll edges and solid edges up to 20 mm thick and 60 mm high.
With cap device, flush milling, roll feed with cap,
Radius milling 2-3 mm + scraper, for veneer edges and solid edges glue application can be controlled accordingly.
Yi3b0diy
Machine in working and technically good condition.
6
CATALOG NUMBER HL 001
- new machine,
With pre-milling (diamond heads), radial scraper and polisher.
Operating panel with keyboard, electronic glue temperature settings, heated guide.
High-strength chain feeder - the permanent workpiece feed mechanism consists of a chain and a set of drive rollers that do not leave scratches on the workpiece surface.
Preheating if the hob may be too wet due to bad weather conditions, this preheating helps dry the hob to achieve a good finish.
Pressure roller ...
12
Maquina em boas condiçoes, pronta a trabalhar, sem garantia, no estado que se encontra. transporte e desmontagem a negociar, a maquina esta em espanha. montagem e formação em casa do cliente tem que ser paga a parte a um tecnico.
Obwq8li8
10
• Model AKRON 850
• Year: 2008
• Serial No: 25599
• Length of base 5000 mm
• Total length: 6500 mm
• Panel length: min 140 mm – max 3200 mm
• Panel width: min 85 mm – max 3200 mm
• Thickness of edge-banding strips in rolls: min 0.4 mm – max 3 mm
• Thickness of edge-banding strips in strips: max 15 mm
• Edge-banding strip height: min 14 mm – max 65 mm
• Working line height: 900 mm
• Panel projection from drive belt: 25 mm
• Drive track speeds of advance: 10, 14, 18, 20 m/min
• Suction air spee...
5
Machine nr: 306/ F Planing boards 45mm
types: FKF G-6
B0avhru2jx
Single-sided machine for joint milling of straight workpiece edges, gluing and finishing of various edging materials from rolls or in strip form, with an edge thickness of up to 20 mm, in longitudinal and transverse feed.
B0y7wutz2e
10
Edgebander BRANDT OPTIMAT KD 68 CF
- year of production 2001
- DTR
Bllgckho
TECHNICAL SPECIFICATIONS:
machine tool adapted to the processing of PVC / ABS edges
veneer up to 3 mm thick and wooden sticks up to 9 mm thick
pre-cutter - plate milling
tape pressure
glue tank, hot melt glue granules, additional glue application roller
heated strip of tape
guillotine - pre-cutting of the veneer
3 pressure rollers
2 ready-to-cut ball crushing units
2 milling aggregates for edge shaping (radial mi...
4
Edgebander HOMAG OPTIMAT KL 76 / A3 / S2 year of production 2000
Price: EUR 16,000
The machine after a complete technical review, ready to work
The thickness of the veneer in a roll is 0.3-3 mm
The height of the glued element is 12-60 mm
Feed speed 24m / min
HOMATIC NC21 control
Machine length 7845 mm
Configuration:
Pre-cutters
Cross-cut saws
Cutters up and down straight
Up and down radius cutters (4 motors)
Edge cutters (4 engines)
Profile scrapers
Svlixo
Flat scrapers
Polishers
Edgebander
Make: DTT
Model: U 15.7-F
Year: 2002
Voltage: 400V three-phase
Length: 850 cm
Width: 140 cm
Height: 170 cm
Power: 18 kw
Working length: 700 cm
Bzsmrczmvj
Conditions: Tested
Included: Metal nozzle up to the cow's udder
Automatic transport trolley included (to be reconditioned)
15
Catalog number S0343
- new machine, in stock
- CE certificate
TECHNICAL DATA
1- glue heating
2- preliminary cutters
3- start-end trimming
4- radial milling
5- polishers
6- two scrapers radial and flat - glue
7- earning corners
- workpiece thickness 8-45mm
- minimum workpiece length 100mm
- minimum workpiece width 100mm
- edge thickness 0.4-3.0mm
- feed speed 9.5m / min
- cutting unit - engine power 1x0,27kW
- 2x0.35kW milling aggregate
- milling aggregate 12000 rev / min
- aggregate of making ...
7
Reliable and well-maintained machine from a Munich joinery.
Additionally equipped with Schugoma Hotair unit.
Incl. Bargstedt workpiece return TFU 08 R
EVA, PU, Laser, Hotair!!!
Employees can be trained in detail by us!!!
Available from March 2022
Cwg7mu3fm
Mileage as at 15.10.2021:
347.184 m
4272 h operating hours
4
Workpiece thickness 8 - 42 mm
Workpiece width min 70 mm
Workpiece length min 150 mm
Edge thickness coils 0.2 - 3 mm
edge thickness solid strips 12 mm
feed speed 12 m/min
Cutting scissors
Trimming unit 0/3°
Flush trimming unit
Fine milling unit R-2 mm
Scraper R-2 mm
Buffing unit
Byuxhi7xh8
Machine length 4000 mm
Weight 1400 kg
8
Akron 860 automatic
CNC controled. Year 2006
9nwqgdo
6
Kantenking table machine 45 ° for zero joint, laser edge
Ghuhffz2
x x x Look at the concept (foto) for your edgebander x x x
- with edge indent and cutter
- for edge processing max. 4 m/min
- stationary use
- with control unit for temperature u. pressure regulation
- up to 65 mm edge height
- up to 3 mm edge thickness
- automatic edge feed with sensor
- sensor for automatic cutting
- stepless speed regulation of the edge feed
- automatic panel
9
Machine Condition Good Weight W-2860mm,D-850mm,H-.1150mm Weight approx.400kg.
Bh7b800chn
10
Catalog number R014
- edge thickness 0.4-5mm
- element thickness 8-60mm
- minimum element length 120mm
- minimum element width 75mm
- feed speed 9-14m / min
- working pressure 6bar
- voltage 400V
- total power 6,4kW
- dimensions length / width / height 3780/1800 / 1400mm
- weight 1110 kg
ADVANTAGES
- new machine
- warranty
- CE certificate
- professional machine
Net price, calculated at the rate of 4.35 PLN / EUR
(with larger exchange rate fluctuations, the price may change)
Bp23noe9rh
Net p...
10
SCM K203E straight edge bander
- after the technical review
- year of production 2003
TECHNICAL PARAMETERS:
Rh2rjxjx
maximum height of gluing the element 10 - 55 mm
minimum material length 140 mm
adjustable feed
manual height adjustment
TANK WITH GLUE
ADHESIVE SYSTEM - GRANULES
guillotine pre-cutting of the veneer
3 pressure rollers
balls trimming finished veneers front - back
edge shaping aggregates (radial cutters)
CYCLINGS FOR REMOVING THE EXCESS OF ADHESIVE
PERFECT POLISHERS - SMOOTH EDG...
5
Type O KDN 520
Air pressure 6 bar
The power supply voltage 400 V 50 Hz
Total power 8,1 kW
Workpiece thickness 8-50 mm
B8ocm8pa
Working height 950 mm
Edge thickness 0,4-8 mm
Sealing side speed 11 m/min
Extraction diameter 1x120/3x60/1x100
Additional gluing unit (for different color granules)
Transport dimensions 4270x900x1750mm
Net weight 1800 kg
6
Max thicknes of precut strips : 3 mm
Max edge-strip height : 84 mm
Min edge strip height : 12 mm
Min lenght of the edge strip to be applied : 230 mm
Adjustable feed speed : 2 - 10 m/min
Installed power : 3,5 kW
Iticnu2
Weight : 250 kg
DImensions : 1804 mm x 1204 mm x 1270 mm
15
HOMAG EDGE BANDING MACHINE KFL 14 with 2 bargstedt .
N7mjf
2 turn stations.
more photos available on request
