Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Dkobsvvkfds Hhvphol

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Dob Hhewd Itmjvphjkl Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, Functionality: fully functional, The new cart for the management and cleaning of the glue pots installed on the SCM edgebanders solves the difficulties associated with the use of polyurethane glue altogether. Dksb Hhvpjqu N Efshjl Machine downtime, occasional use of PU glue, cleaning, and glue waste will no longer be a problem. Just insert the glue pot directly into the particular tank, start the automatic maintenance cycle and the job is done

Condition: not inspected (used), With glue specification for wood and plastic edges 0.4 - 2.0 mm, (for panel thicknesses over 25 mm, max. edge thickness 1.5 mm, workpiece thickness 10 to 45 mm, min. workpiece length 180 mm, min. workpiece width 65 mm, Dsbowgc N Uj Hhvphokl feed speed 5 m/min., dimensions 2040 x 1350 x 1290 mm, unrefurbished as seen from the Seevetal location, subject to prior sale

Condition: used, Year of construction: 2019, Functionality: fully functional, 2019 model with old control system and slight paint damage. (The photos are product photos and do not depict the original machine.) Slight signs of wear may occur. Convenient and easy control of all important functions via the front control panel Excellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reduction Precise and proven units enable optimal processing and perfect edge finishing Pre-milling unit equipped with two dia-milling cutters High-frequency motors for edge processing Equipped with radius and flat scrapers as standard Optionally expandable with either a buffing or grooving unit with a groove width of up to 4.0 mm Available in various configurations to adapt to individual requirements Automatic temperature reduction of the glue unit when the machine is idle for extended periods Standard equipment includes an aluminum glue container for EVA hot melt adhesive Dimensions and Weights Length (product) approx. 3314 mm Width/Depth (product) approx. 1085 mm Height (product) approx. 1300 mm Weight (net) approx. 545 kg Flush radius trimming unit Flush radius trimming unit power input 2 x 0.35 kW Flush radius trimming unit cutter diameter HM 55.3 mm Flush radius trimming unit cutter speed 12,000 rpm Flush radius trimming unit extraction nozzle diameter 60 mm Flush radius trimming unit number of extraction nozzles 2 Corner rounding unit Corner rounding unit power input 0.35 kW Corner rounding unit tool diameter 58 mm Corner rounding unit speed 12,000 rpm Electrical data Connection voltage 400 V Mains frequency 50 Hz Glue unit Glue pot power input 0.18 kW Glue pot operating temperature 190 °C Glue pot extraction nozzle diameter 60 mm Glue pot capacity 0.8 kg Pneumatic connection Operating pressure 6.5 bar Feed Feed input power 0.55 kW Feed speed 7 m/min Edges Edge thickness for rolled material 0.4 - 2.0 mm Edge thickness for strip material 0.4 - 3.0 mm Pre-milling unit Pre-milling unit extraction nozzle diameter 2 x 80 mm Pre-milling unit input power 2.2 kW Pre-milling unit cutter speed 9000 rpm Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit cutter height 56 mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Scraper units radius scraper 2 mm Buffing unit Buffing unit input power 2 x 0.14 kW Buffing unit speed 2800 rpm Workpiece Workpiece thickness 8 - 50 mm Dobowg Abdj Hhvphokl Workpiece length min. 120mm Workpiece width min. 110mm Equipment ----- - 730mm roller edge turntable - Anti-adhesive spray unit - Pre-milling unit with two dia-milling cutters - Edge preheating device - Glue container quick-change kit - Gluing unit - Corner rounding unit - Flush radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit

Condition: used, Year of construction: 2021, operating hours: 2,326 h, Functionality: fully functional, USED EDGE BANDING MACHINE EDGETEQ S-380 + XES 200 Advantages Pre-melter for pur EVA glues (beer krug HOMAG) XES 200 pre-heating and cleaning station Air table Dob Hhvpowhk Egohekl Unit for application of release, antistatic and cleaning agents Sprayers for application of lubricant MZ40 multi-stage scraping unit Warranty on mechanical parts TECHNICAL DATA Feeding and unloading of the element Cushion table in front of the machine Unit for application of release agent Pre-milling unit 2x 2.2 kW Variable feed 8–18 m/min Edge banding: EVA glue melter QA65 N glue application unit (replaceable) Edge magazine with rollers (automatic edge feeding from the desktop) 3-roller pressure zone Lubricant application unit Element finishing: Cutting unit Milling unit (profile edges) Multifunctional rounding unit Automatic profile scraper MZ 40 (R1/R2, controlled from the desktop) Flat scraper Cleaning agent application unit Top+bottom polishing unit Lubricant sprayer

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Dkob Hjvvkfqehvphel Storage location: Nattheim

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Dkebsv Sf I Ej Hhvphjl Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2020, Single-sided edge bander Homag Edgeteq S-300 (Optimat KDF 440C) Year of manufacture 2020 Incl. workpiece return system Ligmatech TFU140/R/25/10/055 Year of manufacture 2017 Edge band thickness max. 8 mm Panel thickness max. 60 mm Roll material thickness max. 3 mm Feed rate min. max. 8-14 m/min Homag Powertouch 15.6" control system Application unit QA65 N 1200 / 1400 CONSTRUCTION ELEMENTS EDITION PACKAGE KDF 440 / 450 Equipment packages / units RELEASE AGENT SPRAY UNIT WORKPIECE JOINING UNIT 2 x 2.2 kW 200 HZ Joining Milling Cutter Set 40mm Blow-Off Device for Jointing Milling Unit Workpiece Preheating IR Emitter Applying Unit QA65 N 1200 / 1400 Edge Magazine for Rolled Materials, Fixed Lengths Pressure Zone with 2 Post-Pressure Rollers S-240/S-300 Software Preparation for Lubricant Trimming Unit 2 x 0.22 kW Software Preparation for Antistatic Solution Multi-Stage Milling Unit Tool for Multi-Stage Milling Unit Shape Milling Unit 1 x 0.35 kW Tool for FF6210 MZ40 Multi-stage Profile Scraper Unit Carbide Steel for 2-stage Multi-stage Scrapers Glue Joint Scraper Cleaning Agent Spray Unit for Workpiece Buffing Unit with 2 Motors Free-Standing Air Cushion Table Infeed Ruler Workpiece Support VARIABLE FEED RATE 8-14 m/min Dsb Hhswcdxvovphskl Automatic Central Lubrication of Chain Conveyor ROLLER TOP PRESSURE ELECTRIC HEIGHT ADJUSTMENT TOP PRESSURE S-240/300

Condition: good (used), Year of construction: 2011, machine/vehicle number: 0-200-23-3741, The machine has been in use so far and has produced good results. Dsb Hhvpjumngvjhekl

Condition: used, Year of construction: 1989, Used machine Year of construction: 1989 Condition: Functionally tested Equipment and technical data: Glue thickness max mm 20 Gluing height max mm 51 Roll material thickness max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue system 1906 cartridge Printing unit Dkeb Hhvpsquyayjhol Trimming unit 1920 Flush trimming up to 20 mm Chamfer trimming Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Location: Hochheim Availability: Short term

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Debjvvkfws Hhvphjkl Storage location: Nattheim

Condition: used, machine/vehicle number: 007812, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Grooving Unit: yes Maximum panel thickness: 90 mm Dsb Hhvjv Sldasphjkl Operating Units: 6 nr

Condition: new, Year of construction: 2024, MACHINE SEEKERS ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. ----- New machine Year of manufacture 2024 Equipment and technical data: Basic machine 1057 XL C with Beckhoff touch screen control Extendable workpiece support 600 mm Extension of extendable boom Infeed ruler standard 3 LED lights in the infeed Joining milling unit 2-motor DIA joining milling cutter 70 x 64x 30 mm Z2+2 Link. and clockwise rotation Edge feeder 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Storage slot for 1.4 kg cartridges (4 cartridges) GluJet collection container Printing unit 1912-3 pneumatic Spray device GM 201 after printing unit Capping unit 1918 pneumatic Extraction hoods for Capping unit Combination milling unit FR201 with DIA milling cutters R=2 mm Form milling unit 1832 Shelf program Dob Hhvpjrucb Sehekl Radius scraper ZK 301 Chip catcher box Surface scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short term Location: Hochheim

Condition: used, Year of construction: 2001, Max. edge band thickness: 0.2 - 12 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Min. workpiece width: 70 mm Feed speed 1: 12 m/min Heat-up time: approx. 8 min Joining unit: Yes, with 2 milling units Automatic roll magazine: Yes Trimming shears up to: 3.0 mm Solid edge magazine: Yes Gluing: Glue pot with granulate on top Trimming saw: Yes, double trimming unit Flush trimming unit: pneumatically adjustable Chamfer and radius milling unit: pneumatically adjustable with interchangeable motors Rounding unit: pneumatically adjustable (corner rounding) Profile scraper: pneumatically adjustable Flat scraper: Yes, scanning Buffing unit: oscillating Unit display: Digital Control type: Section control/PLC Operation: Screen/PC control Extendable Roller support: Yes. Protective cover: Yes. Working height or feed table height: 800 mm. Approx. weight: 2100 kg. Dimensions: 5300 x 950 x 1300 mm. Motor power: 12 kW. Storage location: Customer. Dksb Hhovvkdaevphol

Condition: used, machine/vehicle number: 007793, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm Dkob Hhvjv Tfydophel

Condition: new, Year of construction: 2022, New machine Year of construction: 2022 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue tray with discharge function optional), HF cross-cut saw station, HF trimming unit, corner copying unit, chain feed, double roller top pressure, pull-out workpiece support rail, signal lamp for workpiece sequence and integrated line control for contactless control of processing functions. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 3.0 / 6.0 mm and workpiece heights of 8 60 mm. Feed speed: 10.0 m / min.; 8.0 m / min. with corner copying 3 free spaces for finishing units 10 color touch screens Machine length 4030 mm Workpiece thickness 8 - 60 mm Workpiece width min. approx. 75 mm Workpiece length min. approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness 0.4-3.0 mm Chip removal joining unit 0 -2.0 mm stepless Total connection 7.5 kW - 400 V Feed speed 10 m/min; 8 m/min. Pneumatic connection 6 bar Net weight 1050 kg Options: Surcharge for radius scraper unit with blow-off device + suction unit Surcharge for flat scraper unit + suction unit Surcharge for buffing unit EVA/PUR glue pot with discharge function Surcharge for diamond tools Height=65mm for joining unit Riepe spraying device (anti-stick) on the joining unit Riepe spraying device (cleaning spray in front of buffing unit) Pipe system with 90° bend + manual slide mounted on machine with D=200mm Dksb Hhjqfad Aovphjl Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 1998, For stationary form milling of head edges on soft and postforming workpieces. As well as for erasing on thick PVC edges on rectangular workpieces and multi-sided machining of symmetrical and asymmetrical soft and postforming profiles, this is possible after manual profile depth adjustment. The motor is manually controlled by scanning on the workstation. Equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 0.8 kW milling motor, continuously adjustable up to 27,000 rpm, equipped as standard with a radius cutter R=3. Scanning is performed by a guide ring on the workpiece. - Unit guide on precision circular guides. Specifications: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius cutter R 3 Electrical connection: 230V / 50Hz / 1Ph Total connection: 0.8 kW Pneumatic connection: 6 bar Space required: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg plus base Storage location: Nattheim Djb Hovvkgbjhvphekl

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Deb Hevxb N Sehvphekl

Condition: used, Year of construction: 2015, Used machine Year of construction: 2015 Condition: Factory overhauled technical data: Workpiece thickness 8 - 50 mm Workpiece width min. approx. 75 mm Edge thickness 0.4 - 3.0 mm Single feed solid edge up to 5 mm Chip removal Joining unit 0 - 2 mm stepless Electrical connection 400 V, 50 Hz Total connection 7.5 kW Feed speed 5.5 - 8 m/min. Pneumatic connection 6 bar Net weight 850 kg Equipment: Dob Hhvjkwhbbophskl Joint milling unit with 2 motors and 45 mm high milling heads instead of 30 mm PUR/EVA outlet basin printing unit cross-cut saw Combination trimming unit Corner copying unit Radius scraper Surface scraper Location: Hochheim Availability: Short term

Condition: used, Year of construction: 2001, with return Dkeb Hhvpevvkdgohol Storage location: Customer

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B Dkjb Hhvpsvxb Nljhsl

Condition: used, Year of construction: 2006, Used machine Year of construction 2006 completely overhauled with new glue application system Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1822 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Dsb Hhvjkwg Slsphekl Availability: approx. 2-3 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Dsb Hhvsvvkg Iephokl

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Equipment and technical data: max. edge thickness 3 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 300 mm min. Workpiece width 70 mm Djb Hhvsr H Rlgephjkl Feed speed approx. 10 m/min Ready for operation approx. 6 min. Power consumption 7 kW Rapid heating adhesive container High-frequency cross-cut saw High-frequency flush trimmer (with combined interchangeable plate cutter for radius, straight and chamfer trimming) Extraction nozzle 100 mm Dimensions: 330x140x130 cm Weight 550 kg Availability: short term Location: Flörsheim