Used Shaped part edgebanding machines for sale (17)

Condition: as good as new (ex-display), Year of construction: 2023, Contour edge banding machine up to 140 mm Work piece thickness, Speed from 2,5 - 12m/min, Quick change glue pot, Glue pot and glue roller teflon coated, Standby function, tilting machine table up to 45° and digital length counter. Standard machine incl. the following options : →electropneumatic pre-melting unit for 2 Kg Cartridge →motorized driving mechanism (patented) →supporting bars with steel balls 3otuqhxq 656f1a2e9d1b8

Condition: new, Year of construction: 2023, Molding edge banding machine Year of manufacture 2023 with direct gluing to the edging material Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm 7b9qiho23j Workpiece width min. approx. 30 mm Workpiece length min. approx. 200 mm Electrical connection 230 V Total connection 3 kW Heating power glue pool ca. 2,7 kW Pneumatic connection 6 bar inner radius 25 mm (special designs possible) Weight approx. 165 kg Working height approx. 885 mm Dimensions approx. 810 x 610 x 885 mm without foil plate Availability: Short term Storage location: Hochheim

Condition: as good as new (ex-display), Year of construction: 2015, Travel 500 x 500 x 500mm A Axis -110 / 20 degrees Bh3b3toickt B axis 360 degrees modulo Rapid traverse 40 meter Speed 30000rpm Changer 30 Exhibition machine like new

Condition: like new (used), Year of construction: 2012, FRAVOL EDGEBANDER FOR CURVES . MODEL A16/S , YEAR OF PRODUCTION 2012. SERIAL NO. 20 1201 A. USED, BUT LIKE NEW, IN EXCELLENT CONDITION AS PER ATTACHED PHOTOS. THE PRICE IS € 2400.00 + VAT Rznrcs2s

Condition: ready for operation (used), - Hand-held device for approaching coextruded and recoated edges, so-called "laser edges" as well as old-classic precoated EVA hotmelt edges. - Perfectly straight, angled, curved and round sheet materials as well as molded parts can be processed. Angled cutting surfaces of up to 55° are no problem. - 3 pressure rollers, 2 motor-driven and a 3rd pressure roller that can be swiveled in by 90° (ideal for inside gluing) - Automatic edge band infeed with edge band detection with stop function - Max. Edge height 65 mm, max. edge thickness: 3 mm - Infinitely variable feed speed from 1 to 5.5 m/min. - Continuously adjustable hot air up to 550°C - Automatic heat-up when the unit is lifted and automatic standby when the unit is set down - Optimum shielding of hot air - no risk of burns on the unit itself - Support table swivels over 90° with fixed zero point - 230 Volt AC - 3.05 kW / 13.3 A - min 5-10 bar compressed air supply - Weight: 10,9 kg - Heating time: less than 30 seconds Bf8pdfltdbl Angle table BAT for HIT-M with vacuum - In combination with the angle table, the mobile HIT-M edgebander becomes a stationary system for producing an optical zero joint. - The associated ball rollers ensure variable positioning. - The angle table allows pneumatic angle adjustment for applying edgebands on slanted cutting surfaces with an inclination of up to 55°. - Table top size W700xD400 mm - Working height 1000 mm - With 42 plastic ball casters for variable positioning - For beveled edges up to 55° inclination, as well as shaped parts - With lateral guide rollers for slanted edges - Pneumatic unlocking as well as damping of angle adjustment - 4m connection cable, compressed air hose - Vacuum injector for vacuum generation (suction power: -0.85 bar) - With a swiveling round vacuum plate (D160 mm) for finishing the workpieces incl. touch valve for switching off unoccupied suction pads - incl. vacuum display

Condition: excellent (used), Brandt KTD 720 year 2009 in excellent condition E2kfq3m

Condition: as good as new (ex-display), Year of construction: 2023, Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material 3otk9cdp →Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins. →Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min. →Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal →Pneumatic cutt-off unit capacity max. 3 x 30 mm →Turntable D=600mm 656f1a2ea2edc

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Zero joint known 230 V 3050 W rated input Sdl72 Edge height 10 - 65 mm Swivel range 0 - 50 ° Edge thickness 0.4 - 3.0 mm Inner radius min. 22 mm Heating time 30 s Feed rate infinitely variable 1 - 5.5 m/min Temperature max. 520 ° weight 10,8 kg Connection compressed air 6-8 bar Dimensions 200 x 160 x 360 mm with machining table 790 x 663 x 1000 mm connection 230 V and compressed air weight 12 kg with downholder with roller for guiding workpieces with foot switch latching/locking available: short term location: Hochheim

Condition: ready for operation (used), Year of construction: 2006, EXCELLENT MACHINE AS IMAGED IN PHOTOS PROMPT DELIVERY Bd9cxpjyhf8 READY TO USE

Condition: used, Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii -Built-in milling cutter: 30 ° -Dimensions: 1000/600/H1450 mm B9rbhin -Weight: 60 kg

Condition: refurbished (used), Year of construction: 2007, Machine type Orbiter , in very good condition, the machine has been used, the machine bears the CE label, electronic control, working length Ø500-Ø2400 mm, working width 1-3 mm, working height 16-50 mm. Injrdl9

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 448M19143, KLUGE HIT-M mobile molded part edge bander / zero joint bander for laser edges. Hand-held device for approaching coextruded and recoated edges, so-called "laser edges" as well as old-classic pre-coated EVA hotmelt edges. Perfectly straight, angled, curved and round sheet materials as well as molded parts can be processed. Angled cut surfaces of up to 55° are no problem. Art. 1001 ---- Scope of delivery: - mobile edge bander HIT-M in Systainer - power and compressed air supply - accessories - instruction manual ---- Technical data: - 3 pressure rollers, 2 motor-driven and a 3rd pressure roller that can be swiveled 90° (ideal for interior gluing) - Automatic edge band infeed with edge band detection with stop function - Max. Edge height 65 mm, max. edge thickness: 3 mm - Infinitely variable feed speed from 1 to 5.5 m/min. - Continuously adjustable hot air up to 550°C - Automatic heat-up when the unit is lifted and automatic standby when the unit is set down - Optimum shielding of hot air - no risk of burns on the unit itself - Support table swivels over 90° with fixed zero point - 230 Volt AC - 3.05 kW / 13.3 A - min 5-10 bar compressed air supply - Weight: 10,9 kg Qtx3efjh - Set-up time: less than 30 seconds ..... Kluge angular table (BAT) for HIT-M with vacuum Art. 1002KLUGE Angle table BAT for mobile edgebander HIT-M (with vacuum) ---- In combination with the angle table, the HIT-M mobile edgebander becomes a stationary system for producing an optical zero joint. The associated ball rollers ensure variable positioning. The angle table enables pneumatic angle adjustment for applying edgebands on slanted cut surfaces with an inclination of up to 55°. ---- - Table top size W700xD400 mm - Working height 1000 mm - With 42 plastic ball casters for variable positioning - For beveled edges up to 55° inclination, as well as shaped parts - With lateral guide rollers for slanted edges - Pneumatic unlocking as well as damping of the angle adjustment - 4m connection cable, compressed air hose - Vacuum injector for vacuum generation (suction power: -0.85 bar) - With a swiveling round vacuum plate (D160 mm) for finishing the workpieces incl. touch valve for switching off unoccupied suction pads - Incl. vacuum display

Condition: excellent (used), Year of construction: 2002, Edgebander for curved workpieces - table with suction cups for workpiece clamping E2i7dxe

Condition: used, Year of construction: 2019, Second hand machine Year of manufacture: 2019 Condition: as new/unused Zero joint known Crw3ewznwr 230 V 3050 W rated input Edge height 10 - 65 mm Swivel range 0 - 50 ° Edge thickness 0.4 - 3.0 mm Inner radius min. 22 mm Heating time 30 s Feed rate infinitely variable 1 - 5.5 m/min Temperature max. 520 ° weight 10,8 kg Connection compressed air 6-8 bar Dimensions 200 x 160 x 360 mm with machining table 790 x 663 x 1000 mm connection 230 V and compressed air weight 12 kg with foot switch push-button/locking with hold-down device with roller for guiding workpieces available: short term Location: Solingen

Condition: excellent (used), Brought from Germany. The machine has not worked in Lithuania. Cuychgglsh You can call or write us. We can speak and write German and Russian. You can also send messages in English.

Condition: used, Year of construction: 1991, Shaped part edge banding machine, edge banding machine, edge banding machine 3kwdlbdl -Workpiece thickness: 10- 85 mm -Fan heater: 6 kW pre-coated edges -Cut knife -edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135kg

Condition: good (used), Year of construction: 1998, I sell the edge banding machine IMA HKA. Suitable for curved shaped edges Good condition, possible to test ! Bwwnresq0h