Used drill grinding machines for sale (62)

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 264237J, total width: 350 mm, total length: 450 mm, total height: 350 mm, overall weight: 70 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time between 04/05/26 and 07/05/26. Dsdpfx Aoyr Hukodwjur MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 450 x 350 x 350 mm Weight: 70 kg External reference: 31

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 256824, input voltage: 230 V, rotational speed (max.): 3,450 rpm, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Duedpjynh I Djfx Adwjr Speed: 2,800/3,450 rpm MACHINE DETAILS Operating voltage: 230 V Rated current: 1.6 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 1,200 mm Weight: 70 kg EQUIPMENT With chuck for drills: 1.5–6.3 mm / 6.3–16 mm / 16–26 mm External reference: Lot 6/ Dommel

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Duedponccx Hjfx Adwor

Condition: excellent (used), Drill Bit Grinding Machine Manufacturer: Schanbacher Model: S3-50 Grinding Range: S3-50 380 Volt Transport Dimensions: Width: 800 mm Depth: 450 mm Height: 1450 mm with pallet Duodpfx Adjyy S E Ejwor Weight: 80 kg

Condition: used, Year of construction: 1982, drill diameter 3-40 mm drilling length 500 mm lip angle 15 - 75 ° total power requirement 4,1 kW Dedpfx Adswntzwowsur weight of the machine ca. 1,5 t dimensions of the machine ca. 1,80x1,60x1,40 m

Condition: used, Year of construction: 1996, drill diameter 3 - 50 mm drilling length 500 mm lip angle 90 - 140 ° voltage 380 V weight of the machine ca. 120 kg Dusdpsp Raizsfx Adwor dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Serial-No.: 76658

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm Dodpfexablxjx Adwsur The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Point angle: 90 - 140° Dsdpfxjx Ea Nme Adwour Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Duodpogy Ti Djfx Adwjr Dressing attachment MARCELS MASCHINEN CH

Condition: excellent (used), functionality: fully functional, Grindable diameter from 2 to 40 mm. Smallest and largest point angle: 40 – 180°. For right- and left-cutting tools, 1-12 cutting edges. Suitable for sharpening twist drills, step drills, and taps. Accessories and an operating manual are included. Dedpoyuta Sefx Adweur

Condition: good (used), Please refer to the images for all technical specifications. Dsdpfx Adsym Aptowour

Condition: used, functionality: fully functional, 1 x drill grinding machine Darex M 5 with 2 x chucks Duodpfxeyvhg Ro Adwjr The machine can be inspected under power.

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Dujdpfx Aoyl Idajdwer Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: good (used), I sell centering grinder strodkowa, in bdb condition. Dujdpfjvbwvmex Adwsr

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Duodpfx Asgd H U Ujdwsr Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW Dsdpfx Adeu Ng Irowsur weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories Dodpfxou Ngxdj Adwsur *

Condition: good (used), Year of construction: 1992, functionality: fully functional, working range: 50 mm, Drill grinder capacity 50 mm Dusdpfx Adsviuzcjwjr

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Djdeu Ng Ncspfx Adwour Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: new, Year of construction: 2013, functionality: fully functional, This is a drill bit sharpening machine suitable for drill bits from 8 to 30 mm in diameter, with an adjustable point angle from 90° to 140°. Standard equipment includes a CBN grinding wheel for HSS drill bits (lasts for at least 3,000 drill bits). A diamond wheel is also available for carbide drill bits, offered at a price of €90.00. Sharpening a drill bit is completed in three steps. First, the drill bit is clamped in a fixture, followed by the sharpening and pointing processes. The entire procedure is finished in less than a minute! Before clamping the drill bit, the diameter is set on the grinding machine using a rotary dial. The drill bit is aligned and clamped with the appropriate collet in the fixture placed into the left-side mount of the machine. Sharpening the cutting edges and pointing is straightforward: switch on the machine, insert the fixture with the drill bit into the right-side mount, and gently rotate from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to sharpen the second cutting edge. Pointing is carried out in the same way, simply using the top mount. That’s it. Just switch off the machine and release the drill bit. Dsdoyn Riwepfx Adwour A clever design combines an eccentric and a special grinding wheel, so there is no need to worry about the cutting edge shape or clearance angle. An additional advantage is that both cutting edges are produced with exactly the same settings, ensuring optimum edge symmetry. Furthermore, the point angle can be freely selected between 90° – 140° before sharpening. High-precision collets for diameters of 8 to 30 mm guarantee concentric clamping. The grinding wheel has a lifetime of over 3,000 operations. In addition to the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drill bits. Changing the wheel can be done in seconds with just a few simple steps. The compact design of the drill bit sharpening machine and its practical carrying handle allow for easy mobile use. As nearly all essential accessories such as collets, fixtures, or hex keys are stored on the machine, everything needed is always on hand. The drill bit sharpening machine is energy-efficient and space-saving. Sharpen drill bits without prior knowledge – clean, fast, and effective. Shipping weight: 25 kg 23 collets (8 – 30 mm) Standard CBN grinding wheel Machine dimensions: 350 x 290 x 220 mm

Condition: good (used), Year of construction: 1998, Saacke UWIC Machine type: Universal CNC Tool Grinding Machine Manufacturer: Saacke Model: UWIC Dujdpfx Adjyk S Nwowjr Year of manufacture: 1998 Control type: CNC control with parameter release Technical Specifications: - 2 CNC-controlled axes - CNC control with parameter release - Grinding in a single setup (no need to convert hand tool holder, spiral grinding device, or radius device) - Camera - Grinding with CNC quality

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW Dujdpfomnntmox Adwor - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Djdsd R A Dcspfx Adwsur Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin Dedpfou Ng Hnox Adwour - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: good (used), functionality: fully functional, DAREX SP 2500 - Spiral Drill Grinding Machine - Grinding capacity: 1.5 - 26 mm - 3 x tool holders - 1 x spare grinding wheel - Machine base - Documentation Dimensions (LxWxH): 0.5x0.5x1.6 m / Weight: 85 kg Subject to errors and omissions. Dusdpeygutdjfx Adwor