Used Drill grinding machines for sale (61)

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm Fgs Iasv E R Evo Ultteb * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Year of construction: 1983, Stock number: 2965-3 Manufacturer: WEDEVAG Year of manufacture: 1983 Machine number: 000115/83 Type / Model: WL 2 Grinding wheels: 203 x 10 x 32 mm Point angle: 60 to 180° Diameter: 2.5 to 20 mm Speed: 2,800 rpm Dirty air requirement: approx. 5 bar Equipment: Base cabinet with extraction system Extraction system: SKF Tools Type: ADT 12 Floor area: 500 x 600 mm Table height: 500 mm Accessories/equipment: Fgj Isv U Agkea Ulttsb Condition: Good Complete weight: 170 kg Dimensions: 500 x 600 x 1,400 mm

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with Fo Iemnntmea Ulttogb - clamping device - presetting device

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m Fgj Ia Uou Ng Irelttob The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: new, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Fj Ia Ultoq E Ry Hetegb Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm Fgj Ia Ulogd H U Ujtteb width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: good (used), Year of construction: 1983, Offered here is a twist drill point grinding machine from the company Gühring of the type AS 417. Data: Manufacturer: Gühring Type: AS 417 year of manufacture: 1983
 small grinding wheel: Ø 6mm gr.grinding wheel: Ø 60mm weight: 0,3t Fe Iasg Rw Nto Ulttogb max. workpiece length: 300mm accessories: 
Wet grinding device
 surface planer device machine light
 pneumatic workpiece clamping

Condition: good (used), Year of construction: 1989, Functionality: fully functional, total height: 18,700 mm, total width: 14,600 mm, total length: 35,350 mm, grinding length: 320 mm, grinding wheel diameter: 200 mm, Shaft and bore grinder. Prod. STANKO(USSR) - 1989. Diameter of the ground hole 50 - 300mm. Max. diameter of the workpiece 560mm. Distance between table and spindle 340mm. Maximum length of the workpiece 320mm. Upper diameter of the inner grinding head 125; 100; 80mm. Distance from the front face of the grinding head to the spindle flange 150 - 400mm. Size of grinding disc 200 x 75 x 63 mm. Workpiece spindle speed range 60 - 600 rpm. Table movement 800mm. Power of main motor 7,5 kW Fgj Iaotzwzxs Ulttsb Total required power 14,63 kW Dimensions of the machine (Length x Width X Height) 3535 x 1460 x 1870 mm Weight of the machine 6400kg.

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: Fgj Ia Ulted R A Dcetsb - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device Fgo Ieu Ng Hnsa Ulttjb The machine is including accessories see pictures! *

Condition: new, Grinding of drills with a diameter of 2 mm to 13 mm Adjustable angle ----- 90 and 135 Grinding speed ----- 5300 o/min Grinding stone ----- CBN 200 Motor ----- 230V/1F/180W Weight ----- 10 kg Fgo Iajga T D Te Ultteb

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm Fe Iovdxz Asa Ulttsgb lip angle 40 - 180 ° total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm

Condition: used, Year of construction: 1997, Functionality: fully functional, Data Sheet – Meteor MM 10-US Description: Grinding center for small tools and micro-tools. Model: Meteor MM 10-US Applications: Sharpening of right-handed and left-handed precision tools Sharpening of drill bits (diameter 0.2 - 12 mm) Production of various engraving tools Sharpening of boring tools, single- and multi-flute cutters and radius cutters Technical specifications: Sharpening range: 1-12 mm for tools with collet; 0.3-10 mm for drills with chuck and collets Grinding spindle: axially adjustable Side stops: with fine adjustment AC motor: 120 W Fj Ia Ujvyzfvjlttjgb Electrodynamic braking system Integrated electronic board Dustproof control panel Machine lighting: 24 V halogen lamp Grinding wheel: Carborundum K 250 Grinding wheel dressing device Dust protection cover Additional specifications: Colour: Green-grey Power supply: 230 V / 50 Hz Safety compliance: CE / STR standards tested

Condition: excellent (used), Drill grinding machine make Earth Chain , Diameter 2 -13 mm Type EDG 213 N including 12 collets for grinding of drill bits from 2-13 mm 220 Volt 150 watts length 320 mm width 140 mm Height 150 mm Weight 9.5 kg Fe Ia Ultetvnf Iotsgb

Condition: used, drill diameter 1,5 - 25 mm lip angle 40 - 180 ° Fgo Ia Uljd Ih Sgettsb 6-jaw-chucks various equipment manual included Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures)

Condition: new, Technical data: Drill diameter: 3 - 32 mm Point angle: 90° - 140 Speed of grinding wheel: 4800 1/min Connection: 230 V Motor power: 0,25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Features: - Ideal for grinding HSS/hard metal twist drills. - Easy operation - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 Fgo Ieh Hyrbsa Ulttsb - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device for perfect centering of the drill on the workpiece and to reduce the feed force during drilling - Device for relief grinding of the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 10 ER collets ER 3 -12 mm, 20 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - Collet holder ER 20 and ER 40

Condition: used, drill diameter 2 - 25 mm drilling length - mm lip angle - ° total power requirement 2 kW weight of the machine ca. 250 t Fgj Ia Ultjtr U R Nsteb dimensions of the machine ca. 0,8 x 0,8 x 1,5 m No. 5414 Drill grinding machine REMA S 2 - 25 Ø 2 - 25 mm Good condition from vocational school Incl. coolant device

Condition: used, drill diameter 3 - 50 mm Fge Ia Uorl U Nqelttob drilling length 500 mm lip angle 90 - 140 ° weight of the machine ca. 120 kg dimensions of the machine ca. 850 x 600 x 1300 mm

Condition: used, Year of construction: 1981, drill diameter 32 mm Fs Iaot Hwn As Ulttjgb drilling length 0 mm lip angle ° total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal Drill Bit Grinder lots of accessories

Condition: excellent (used), Drill grinding machine Make Earth Chain Grinding range 12-26 mm Type EDG 1226 N Fo Ia Uotvv A Aolttjgb including 15 collets: from 11-26 mm Clamping range 220 volt Length 450 mm width 220 mm height 210 mm Weight 28 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, for drills (HSS and solid carbide)diameter 7 – 20 mm (option ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° tip angle fast, easy, precise, economical Specifications for EASY-POINT-GRINDER EPG-1 Tip-angle step less adjustable between 90° – 140° Standard collet-set for drills diameter 7 – 20 mm Optional collet-set for drills diameter 3 – 8 mm Optional collet-set for drills diameter 20 – 30 mm CBN-grinding wheel for HSS drills Ø 118 mm Opt. DIAMOND-grinding wheel for carbide drills Ø 118 mm Brush-less electrical motor 250 Watt Fgs Iobrptvea Ulttob Spindle speed 2900 RPM Electrical input specifications 230 Volt 50 Hz Weight ca. 22 Kg / 45 lbs Re-sharpen your drills according to your materials and your machining conditions!

Condition: new, Technical data: Drill diameter: 3 - 20 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,12 kW weight, approx.: 8,6 kg Dimensions, approx.: 290 x 150 x 180 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Rotor with precision ball bearing - CE Fo Ia Uleh Hyqwsttjgb Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 14 - 20 mm - Collet holder ER 20, ER 25

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Fge Ia Ulsvn U Adjttob Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, Year of construction: 2025, machine/vehicle number: 2024, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced Fgj Ia Ulto R R R Ssteb The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: new, Year of construction: 2025, operating hours: 1 h, Standard equipment red line Optical precisions drill point grinding machine for 2 fluted drills regrinding and point splitting in one chucking diameter range 2 to 16 mm (1 to 20 mm as option) point angle 80° - 150° infinitely adjustable cutting angle 0° - 20° infinitely adjustable relief angle set to 30° incl. complete electrical instalation with single phase electrical motor 0,3KW 115V 60Hz (or 220V 50Hz) and integrated power-supply for illumination of the optical system incl. built-in optical projection system with 10 power lens (zoom lens with 6 - 20 power as option) incl. integrated point splitting device incl. one precision collet holder and one set of double-tapered precision-collets of your choice Fj Ia Uljbrpr Uettogb (MP 16 for drill-dia. 3-16 mm, MP 6,5 for drill-dia. 1-6.5 mm or MP 20 for drill-dia. 6.5-20 mm) incl. 1 double sided grinding wheel dia. 125mm CBN (one side coarse [grit ~100] second side medium [grit ~200]) incl. wheel guard with connection system for vacum cleaner incl. 1 each of detailed operating manual with pictures, spare parts list, CD-Rom and CE-Declaration (on demand)