Decoiler

FRECH

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Kljdpfx Asza E Rmogpeu

Condition: new, Year of construction: 2018, pan capacity 420 kg Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Kedpfxstv Rlzj Agpjlu Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW With control cabinet.

Condition: used, Year of construction: 1994, closing pressure 600 kN Kjdpfxstuxmyo Agpslu clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1995, closing pressure 2200 kN Kodpfx Agevxlufjpjlu clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2007, used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Klsdpfx Agstwfknopsu Included support unit and spray- and blowrail (system SR) Connection 24 pin plug electric driving unit with 400mm stroke length

Condition: used, Year of construction: 1999, closing pressure 3150 kN Kedovfhrtspfx Agpelu clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN ejector stroke 120 mm height of form 300-700 mm column diameter 110 mm casting capacity 158 kN casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2024, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 m/m injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 m/m Used Die Casting machine DAW XX with XX control and real-time injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Kodpfx Ajvvx Hcogpelu Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement. ----- Used Die Casting machine DAW XX with XX control for the use of zinc alloys. Available from used machine stock. On the machine some repairs were carried out by us as manufacturer. Amongst other things, the closing unit was overhauled, all cylinders new sealed and recognizable defective parts replaced. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. ----- Used Die Casting machine DAW XX without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Technical details: Kledpfx Aswc Tdzjgpsu Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement. Ksdpfxsfrvzvs Agpelu

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. Ksdoy Diauopfx Agpelu The device has been checked and repaired by the manufacturer