Used Center lathes 0-299mm turning diameter over bed for sale (104)

Year of construction: 1977, Condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Bwob Hcnqomdn Dxjmel

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: BK02, TOP condition - From a development department - very few operating hours "Please submit an offer when you inquire" (Please state your offer price) Bsb Hjv Urpbjcnqmswl Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical data, see handout. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection requirements specified in accident prevention regulations. Not for private sales. Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical data, please see handout in attachment. German text leading language. Without any guarantee and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm Bsb Hcnov Dmnwjqmswl - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm Bwjb Hovd Dbnscnqmsl spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Bsb Homw Ukcocnqmowl Dimensions: 150x85x155 cm LxWxH

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Leit- und Zugspindeldrehmaschine Weiler Matador VS2 - Partially Refurbished Item Number: 04-03-224 Manufacturer: Weiler Condition: Very good general condition Partially refurbished Delivery time: Immediate (subject to prior sale) Specifications Year of Manufacture: Approx. 1987 Dimensions (L x W x H): Approx. 1500 x 1000 x 1700 mm Weight: Approx. 600 kg Digital Display: New 3-axis digital display from Sino Capabilities and Dimensions Maximum turning diameter over bed: Approx. Ø280 mm Maximum turning diameter over support: Approx. Ø160 mm Maximum turning length: Approx. 500 mm Bar capacity: Approx. Ø36 mm Spindle Speed range: Approx. 15–3550 RPM Spindle nose: A 2-5 Drive power: Approx. 3.0 kW Automatic longitudinal and face feeds: Feed range approx. 0.05–0.80 mm/rev Bob Hju Tc Adjcnqmswl Threading capability: Metric: 0.20–12 mm Imperial: 80–2 threads/inch Diametral pitch: 160–6 DP Module: 0.1–4 Tailstock Quill taper: MK3 Included Accessories New Sino 3-axis digital display New 160 mm 3-jaw chuck Quick-change tool post size A + 1 holder Bed stop New work lamp New cooling system Complete documentation Emergency stop system Various wrenches Machine leveling feet New electrical chuck guard New collet chuck system 386E New collet set 386E Optional Accessories Lead screw and feed rod cover Drill chuck Live center Additional quick-change holders Further accessories available upon request. Price and Additional Technical Details Please contact for price and additional technical specifications.

Year of construction: 1988, Condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Bsb Hcsma Snxonqmswl

Condition: new, Year of construction: 2025, Precision metal lathe TYTAN 750S 230V with spindle speed control on a DC voltage converter (inverter). Operating parameters: turning diameter 220 mm, turning length 750 mm, 1 kW motor at 230 V. The machine is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking and reaming holes. Ideal for use in small production plants, workshops or garages. Machine description The TYTAN 750S 230V universal lathe, thanks to the smooth adjustment of the spindle speed, is an ergonomic machine that responds to the needs of the user. Reducing the time for setting the machine when machining parts with a wide range of dimensions translates into efficiency and ease of use. Version S - electronic and stepless spindle speed control, via a DC motor and voltage regulator. This ensures the best rotational accuracy of the lathe chuck, which gives better quality of machining of the manufactured elements. Main advantages: Modern DC motor with smooth spindle speed control ensures comfort of use and shortens calibration time. LCD screen – with spindle speed display allows you to control and quickly modify spindle speed when setting cutting and threading modes. Two ranges of spindle speeds: reduced (50-1125) for machining hard steels and increased (100-2500) for precision turning at high speeds. Cut threads – metric - 12 degrees (0.4-3.5), inch - 12 degrees (8-44), possibility of cutting left and right threads. Automatic feed – in compliance with EU directives (CE) and Polish regulations and DIN standards. The machine is fully compliant – easy and convenient machine operation. Machine base optionally available Technical parameters Turning diameter over bed 220mm Turning diameter over cross slide 110mm Spacing of fangs 750mm Bed width 100mm Hole through the spindle 38mm Cone at the end of the spindle MK5 Number of spindle speeds liquid Spindle speed range 50-2500 rpm Number of metric threads 12 Metric thread range 0.4~3.5mm Number of English (inch) threads 12 English (inch) thread range 8-44 threads per inch Longitudinal feed range 0.15 - 0.25 mm/rev (2) Maximum travel of the chuck slide 70mm Maximum travel of the cross slide 80mm Maximum longitudinal carriage travel 630mm Tailstock sleeve travel 60mm Taper in tailstock spindle MT2 Main engine 1000W Tailstock bearing liner travel distance 60mm Tailstock sleeve end MK2 Main engine 1000W Dimensions L/W/H (without base) 1250x380x1100mm ​ Weight (without stand) 95kg Bwebov Uplae Hcnqmjl standard equipment 3-jaw chuck (125 mm) Fixed and movable rest Change wheels MK2 permanent fang MK4 permanent fang Lubricator Shavings tub Chuck and chuck key Complete set of service tools Safety guards compliant with CE standards User manual in Polish CE Declaration of Conformity optional equipment Machine base Set of lathe knives 12 x 12 (11 pcs. with soldered plate) MK2 live center MK2/B16 drill arbor HSS-CO5 Cobalt Drill Bit Set / 1-13 Universal cooling system Emulsifying oil, cutting fluid ES-12 1L

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts Bsb Hsv Dmnqecnqmowl - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall

Condition: used, TECHNICAL DETAILS - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 356 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - B Axis stroke : 564 [mm] Bwsb Hcnsv Td E Ssqmjl - Spindle / counter-spindle distance : 784 [mm] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 590 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 37 [kVA] - Number of working hours : 7300 [h] WEIGHT & DIMENSIONS - Machine floor space : 3.495 x 2.050 [mm] - Machine height : 2.222 [mm] - Machine weight : 5.800 [kg] EQUIPMENT - CNC : MORI MSX-850 IIIC - Tool probe - Coolant tank - Chips conveyor - Parts catcher

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Bwsb Hcneqgdkioqmsl Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: good (used), WEILER MATADOR L&Z spindle lathe -center height 140mm -turning diameter 295mm -turning diameter over support 155mm Bwjb Hju Ezfwscnqmol -turning length 500mm -Speed range 15-3550 rpm -Automatic longitudinal/face feeds -Spindle bore 36mm Three-jaw chuck -Collet chuck device incl. collets -Multifix with three inserts -Interchangeable jaws -Electric chuck guard -Tailstock Mk3 -Total power requirement 3 Kw -Documentation Dimensions: LxWxH 1.6x0.7x1.6 meters / Weight: 750Kg Errors / input errors excepted

Year of construction: 1986, Condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Bwob Hcnon Ard Djqmjl

Condition: used, Year of construction: 1980, turning diameter over bed 297 mm turning diameter over slide rest 160 mm turning length 800 mm total power requirement 2 kW weight of the machine ca. 0,8 t Bsb Hcnqev Aci Ijmewl dimensions of the machine ca. 1,8*1*1,2 m

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service Bob Hcnqjv Da Tmemjwl particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - RÖHM four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - machine swing feet - original operating instructions

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 2,100 h, turning diameter over cross slide: 200 mm, spindle bore: 66 mm, turning diameter over bed slide: 435 mm, center height: 217 mm, turning length: 1,000 mm, total length: 3,061 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 1 rpm, bed width: 202 mm, For sale: WEILER E40 Precision Lathe – only 2100 hours on the clock, Machine condition as new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and a 1,000 mm turning length. Perfect for workshops needing accuracy and durability. Contact for pricing and details! Bjb Hcov A Irzjnqmjwl

Condition: good (used), Weiler lathe Turning diameter bed: 280 mm Turning diameter support: 180 mm Beb Hcnsl Ayd Rjqmswl Turning length: 800 mm Spindle bore: 24 mm Speed max: 1600 RPM Diameter faceplate: 140 mm Included tools and coolant pumpe Dimensions: 156x70x133 cm LxWxH

Condition: used, Year of construction: 1999, Technical details: Bweb Hcnqov Tnnqomel total power requirement: 1,5 kW

Condition: used, Functionality: fully functional, machine/vehicle number: 211433, workpiece weight (max.): 1,200 kg, Offered for sale is a Schaublin 135 lathe in good technical condition. The machine is fully functional with accessories. All guideways are in good condition, and the machine's geometry is sound. All slides run smoothly and evenly. Bobjv Rxhij Hcnqmswl The machine was overhauled in 2002 and has always been serviced according to the manufacturer's specifications. Please take advantage of the opportunity to view this machine on-site.

Condition: used, Year of construction: 1961, turning diameter over bed 330 mm turning diameter over slide rest 165 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 2 x 1 x 1,5 m No. 1009 Lathe WEILER LZ-300 Speed range 24-2800 1/min. Bjb Hcnjunug Sjqmewl Feed rates 0.013-1.27 mm/min Space requirement approx. 19 0x 700 mm, Weight approx. 700 kg. The e-lead spindle is removed from the machine 3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessories tool cabinet with various accessories. Working area: 165 x 600 Drive: 3 kW

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min Bobov Da Tge Hcnqmewl total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 864, center height: 140 mm, center width: 500 mm, Machine from the insolvency of an automotive supplier - machines are currently still in operation! Bobjv N Inio Hcnqmjwl TECHNICAL DETAILS Digital display: Available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: Available Quick-change toolholder: Available Tailstock Type: Available Further information according to manufacturer - without guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Main spindle Spindle head according to DIN ISO 702-3: Size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Inner taper depth of the main spindle: 50 mm Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 - 4,000 rpm Number of Gears: 1 Number of speeds: continuously variable Feed drive Number of feeds: 24 Feed range longitudinal/transverse: 0.02 - 0.63 mm/rev / 0.006 - 0.2 mm/rev Threading range Metric threads: 0.25 - 8 mm Inch threads: 80 - 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper mount: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support Bwobjv Da Tas Hcnqmjl - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36,0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 15 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm Beb Hsv Da S Nscnqmowl from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: Beb Hcsv Da Spsnqmswl - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet