Condition: used, Year of construction: 2017, Working dimension X: 3.200 mm Working dimension Y: 920 mm Working dimension Z: 70 mm Number of milling spindles: 1 Main motor power: 8 kW Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 7 Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Vertical working surface: Yes Machine table: Feed-through technology Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 8 m³/h Special workpiece clamping system: Vacuum clamping system Safety device: enclosed cabin Milling for fittings: Lamello Clamex LAMELLO p-System: Yes Interface for .dxf data: Yes Dksb Exjwd Nzropvxol Automatic central lubrication: Yes Control: PC control Software: HOLZ-HER CAMPUS NC-HOPS, HOLZ-HER CAMPUS ACADEMY, PC office licence, HOLZ-HER CAMPUS MAKRO PAKET, HOLZ-HER CAMPUS V6 Conformity marking: CE mark

Condition: used, machine/vehicle number: 006380, X axis working area: 4500 mm Deb Exol Txwqjpvxekl Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 21

Condition: repair required (used), Year of construction: 2007, Functionality: unexamined, travel distance X-axis: 6,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 170 mm, controller model: Kvara, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is currently partially operational. A number of parts need to be replaced/checked, such as the air lines. PLC is operational, possibly software reset required. 3-axis machine. All parts, mats, bulkheads and protective covers are present. Can be picked up immediately. Possibly also a similar 4-axis machine for sale. This is fully operational and can be picked up mid-October. Dkeb Exjwg Hw Nspvxol

Condition: new, Complete set of safety mats for a CNC machine, new and in original packaging. Includes all components required for the safe operation of a CNC machine. Very easy to install, can be installed by a trained machine operator. Overall dimensions: 5600 mm long and 1330 mm wide. Weight approx. 350 kg. Dkebev T Na Ie Expvxol Supplied with plug-in safety mats in the following sizes: - 3 pieces 1000 x 1200 - 2 pieces 750 x 1200 - 2 pieces 500 x 1200 - 6 pieces plug-in connection cables - 1 piece transition strip for the machine - 9 pieces aluminum cover profiles - 2 pieces middle zone connecting bars in yellow - 2 pieces outer zone connecting bars in black - 1 piece assembly instructions Unfortunately, we ordered the incorrect safety mats, and since these are manufactured goods, we cannot exchange them. In the last picture, we have assembled the reorder; it is for your convenience only. We are happy to ship the goods; the buyer bears the shipping costs.

Condition: ready for operation (used), Year of construction: 1999, A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible. Djb Exjwhfmropvxjkl

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Storage Location: Supplier Dkjbjwhrvts Expvxsl

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Price: On request - Main motor power [kW]: 9.5 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Working range Z [mm]: 1810 - Number of milling spindles [pcs]: 1 - Year: 2013 - Documentation available: Yes - CE mark available: Yes - Serial number: AA1/017355 - Voltage [V]: 400 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Djb Ejwcbr Hexpvxjkl Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2020, Working dimension Z: 300 mm Number of milling spindles: 1 HOLZ-HER 5-axes spindle 7840: Yes Milling spindle liquid-cooled: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction HOLZ-HER Drilling aggregate 7882: Yes Cantilever machine: Yes Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 8 Positioning aid: Yes Laser setup aid: Yes Self-adjusting machine table: Yes Vacuum pump: Yes HOLZ-HER ECO-Vac: Yes Safety device: Safety mat Interface for .dxf data: Yes Pendulum machining: Yes Control: PC control Control cabinet cooling: Yes Software: HOLZ-HER CAMPUS Conformity marking: CE mark Space requirement Length: 8,95 m Space requirement Width: 4,62 m Dkeb Exsv R Ekwspvxsl Space requirement Height: 2,86 m

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit Dkob Ejtq Hkrsxpvxel - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: used, Year of construction: 2010, CNC Intorex TMC 3000 Maschining centre 8 (9) axis -Max. working lenghts 3000mm -Max working square 220x220mm -Max. working diameter 450mm (when wood round) -Stroke axis X 3800mm -Stroke axis Y 460mm (plus 230, minus 230) -Stroke axis Z 510mm -Stroke axis Y2 360mm (turning) -Stroke axis Y3 360mm (milling) -Stroke axis Y4 360mm (sanding) -Stroke axis B (rotary +/- 90°) Power: Dsb Eeunk Rmexpvxjkl -Axis A (rotary main motor) 22,2 kw 0-1500 upm -Axis Y2 11kw 1000-4500 upm -Axis Y3 11kw 1000-6000 upm -Axis Y4 2,2 kw 3000 upm max. 24.000 upm -Electrospindle (HSC) 12 kw max. 24.000 upm - Toolchanger 6 positions HSK 63 F - Total installed power 70 kw - Weight approxm. 9,5 tons

Year of construction: 2007, Condition: ready for operation (used), Workpiece Workpiece X 930 mm Workpiece Y 320 mm Workpiece Z 190 mm This KRÜSI KM-95 G1 was manufactured in 2007. A CNC Wood Machining Centre, it is ideal for a variety of woodworking applications. Consider the opportunity to buy this KRÜSI KM-95 G1 CNC Wood Machining Centre. Contact us for more information. Dob Expswdza Hevxekl Application Types CNC Wood Machining

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Dksbjwhrvme Expvxsl

Condition: excellent (used), Homag BOF 311 machining center Useful milling work area 3225 mm x 1700 mm Automatic work table with 6 bars and 3 carriages per bar Various large, medium, small suction cups 14 power clamps 58-120 04 power clamps 58-120 Tool transfer pick-up Drilling unit 21 spindles 17 vertical 4 horizontal blade 120 mm 5-axis milling unit double fork kw 15 from 1000 to 24000 rpm liquid cooling Automatic chain tool change magazine 30 positions Position for blade diameter 350 mm Drilling aggregate with 4 spindles Dksb Expvswh N Uaexol 10 chip guide aggregate Chip transport belt Vacuum pump

Condition: used, Year of construction: 2018, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Independent Z-axes: 2 HOMAG Split-Head: Yes Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 20 Horizontal drilling spindles in X: 12 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Deb Exovg Riqepvxekl Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Outfeed: Workpiece return Dowel insertion: Yes Glue system: PVAc Safety device: enclosed cabin Control: Homag powerTouch HOMAG - Uninterruptible power supply: Yes HOMAG Plausibility check: Yes Control cabinet cooling: Yes Software: HOMAG WOODWOP 7.1 Conformity marking: CE mark

Condition: good (used), Year of construction: 1998, Functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Dkobst Dl U Ee Expvxol Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: incl. installation and commissioning with production-ready handover!

Condition: good (used), Year of construction: 2020, I offer for sale CNC Nesting HOMAG CENTATEQ N-500 with chaotic warehouse Storeteq S 200 profi. Machine on display at our client in Slovakia. Dksb Exewfgrwopvxol

Condition: ready for operation (used), Year of construction: 2011, operating hours: 10,909 h, Functionality: fully functional, machine/vehicle number: 3001300311, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 100 mm, number of slots in tool magazine: 8, input voltage: 400 V, For sale CNC machining center profit H20 Format-4 Felder - 2011. The machine works continuously in a two-shift system, at the moment you can check it during operation! Dob Ejv Sz I Ijxpvxskl 3-axis center with preparation for the 4th axis (to start the 4th axis you need to buy a controller and a unit) Machining field 1250x3150mm, height Z = 100mm, possibility of working on two working fields. In 2024, the electrospindle was regenerated. All repairs and maintenance carried out by a qualified service. We provide loading. Transport on the buyer's side - truck, box length 7-8m Requirements to connect the machine: -Electric cable 5x4mm2 with a plug that fits into the sockets in the workshop -Electrical protection (at least) 32A industrial matched to the power of the engines General rule: rated current given on the machine (plate) + 40% -Pneumatic connection with an internal diameter of min. 12mm -Compressor with a capacity of at least 100l/min -Extraction installation We issue a VAT invoice The given price is gross. In case of questions, please contact us by phone or email

Condition: used, Year of construction: 2005, operating hours: 5,555 h, Functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Bosh Rexroth, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, table width: 1,300 mm, table length: 4,000 mm, rotational speed (min.): 1,200 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,500 kg, spindle motor power: 10,000 W, spindle nose: HSK63F, number of spindles: 1, number of slots in tool magazine: 15, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION. 1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F. Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360° Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min Gateway: 290 mm 1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table division into two stations for alternating work 1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.) Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card Profibus SERCOS drive control system Dsb Expvowh Aidjxokl Data input: USB-Stick, local network Operating system: Windows2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Movable control panel with manual control panel Remote diagnostics Interpolation: 5 linear, 2 ½ D circular Connected power: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% efficient. Storage location: northern Poland

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Dkjb Ejvph Hxsxpvxol

Year of construction: 2017, Condition: ready for operation (used), Main Drive Number of axis 5 Table Outer length 8500 mm Outer width 2600 mm Additional Equipment Automatically adjustable support table with vacuum pins Vacuum suction plates built into the fixed machine bed Allows flexible and secure part positioning Djbjwctyis Expvxjkl This 5-axis Hamuel Reichenbacher VISION III-TT-L was manufactured in 2017, designed as a CNC Wood Machining Centre. It offers advanced capabilities for complex woodworking tasks. Consider the opportunity to buy this Hamuel Reichenbacher VISION III-TT-L CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Rapid traverse speed: X/Y axis: 45 m/min. Z axis: 15 m/min. A/B axis: 10,000 °/min. Djb Expjir Aq Tovxokl 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Condition: good (used), Year of construction: 2006, operating hours: 14,000 h, Functionality: fully functional, machine/vehicle number: AL1/004511, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed length X-axis: 2,800 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 110 mm, nominal power (apparent): 11 kVA, controller manufacturer: ESA, controller model: KVARA 6, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 110 mm, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, table width: 1,250 mm, table height: 900 mm, table length: 2,750 mm, Working dimension X 2,900 mm Working dimension Y 1,240 mm Working dimension Z 180 mm Number of milling spindles 1 Main motor power 6.6 kW Rotation speed max 18,000 rpm Torque support Tool clamping system HSK-F63 Tool changer positions 8 Vertical drilling spindles 12 Horizontal drilling spindles and X 4 Horizontal drilling spindles and Y 2 Groove saw and X-direction Deb Exjwh I Nvspvxskl Lock recess milling aggregate double-sided Angular head 0-360+0-90 deg. Vector axis Cantilever machine Machine table Pod and rail table Number of consoles 6 Vacuum pump Number of vacuum pumps 1 Capacity vacuum pump 100 m³/h Safety devices Bumper Interface for .dxf data Control PC control Software SCM XILOG Conformity marking CE mark

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 1,600 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: Syntec, controller model: SYNTEC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Price: On request CNC Machining Center Year of construction 2024 Hiteco CNC 12Kw milling motor HSK63F mounting retool dish 10 positions multi-drill 2 groove saws 7x vertical drills 8x horizontal drills software PWood Pegasus Working field X-axis 3,200mm Working field Y-axis 1,600mm Working field Z-axis 135mm Vacuum pump Becker VTLF2.250 5.5Kw Omron safety light street central automatic grease lubrication connection diameter extraction Ø200 Required capacity 28m/m | 2900m3/h Weight 3,200Kg total power Free 1 year online help desk. Teamviewer language English This service prevents unnecessary downtime. Dkobstty Aho Expvxel Immediately available Delivery and installation negotiable in Europe D.M.A Machines are assembled in Almelo according to the EG2023 Europe CE marking Pilz The Spirit Of Safety

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, Price on request CNC Machining Center Year of construction: 2025 milling motor 9Kw speed 1,000 / 24,000Rpmrecording HSK63F retool-change magazine multi-drill + 2 groove saws 7x vertical drills 8x horizontal drills software PWood Pegasus inport: DXF, jpg, png, eps, plt,... Cad milling simulation software nesting optimization Working area Y-axis 1,600mm Working area Z-axis. 200mm Vacuum pump Becker VTLF2.250 5.5Kw Omron safety light-street central automatic grease-lubrication connection diameter extraction Ø150 Required capacity 28m/m | 2900m3/h Weight 2,600Kg Total power 20.7Kw Free 1 year online helpdesk. Teamviewer language English This service prevents unnecessary downtime. Dob Exovpuniepvxokl Immediately available Delivery and installation negotiable for the whole of Europe D.M.A Machines are assembled in Almelo according to the EG2023 Europe CE marking Pilz The Spirit Of Safety overview of all work areas: - 1,300x2,600mm - 1,300x3,200mm - 1,600x3,200mm - 1,600x5,200mm - 2,100x3,200mm - 2,100x4,100mm - 2,100x 5,200mm - 2,100x6,100mm Z-axis 85>500mm many options possible, please contact us for this

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Delta, workpiece height (max.): 300 mm, total height: 2,100 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 9,000 W, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Made in The Netherlands Manufacturer: D.M.A. Machinery Model: Express-Router Dimensions: 1,300 x 2,600 mm Machine type: CNC Nesting Machine Features: - Tool-changing station with 10 positions - Nesting CADCAM software: Pegasus - Speed: 1,000 - 24,000 RPM (9kW ATC spindle) - Vacuum pump: 5.5 kW (Becker) - Automatic lubrication system - Servo motors and servo drivers - Hiwin linear guide system - Syntec CNC control - Schneider electronics - Supported file formats: DXF (AutoCad), EPS, PLT, TXT, AI (Adobe Illustrator), and more Dkjb Expju E Th Rsvxsl - Professional design tools: direct drawing, image processing, text editing, serial numbering, and advanced nesting function Available Configurations: - X-axis: 2,600/3,200/4,200/5,200/8,000 mm - Y-axis: 1,300/1,600/2,100/5,000 mm - Spindle: 9/12/16 kW (CC) | HSD/Hiteco - Multi-Drill: Yes - Horizontal side milling motor: 3.2/6 kW (0-305°) - Saw unit: 6 kW, Ø300 mm Other dimensions and configurations available upon request.