Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection is possible. Expected to be available from the end of September 2025. Nodpfxsw Azuzj Ahwecn

Condition: ready for operation (used), Year of construction: 2008, A CNC woodworking center Homag is available. Travel path X/Y/Z: 4000mm(4200mm)/1235mm/182mm, machine dimensions X/Y/Z: approx. 8000mm/5500mm/2950mm, operating hours: approx. 33226h. The machine is impact-sensitive at the terminal, and the laser shows problems with stone detection. Including spare operating equipment, chiller as well as various clamps and suction units. Documentation available. An on-site inspection is possible. Nedpfx Ajyddz Sjhwjcn

Condition: new, Year of construction: 2025, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system Ncodpfed Hz Nisx Ahwen • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis of 300mm is equipped with a 9kW electrospindle and 24000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots allowing manual clamping of irregular shapes. ATC - The machine is equipped with an automatic linear magazine with a capacity of 8 tools. The automatic cutter changer does not require manual tool changing by the operator. Within one process, the machine can perform a multitude of operations such as surface planning, milling and drilling with various tools. Reinforced HEAVY DUTY construction - the machine body consists of profiles with a wall thickness of up to 10 mm. The frame is welded in its entirety, then subjected to a stress-relieving process in special conditions, and finally milled. This sequence of the process ensures the achievement of excellent results in stiffness, stability and vibration resistance. INDUSTRY 2.0 is a must-have in production plants requiring maximum machine efficiency. Worktable size - X - 2100mm, Y - 4000mm, Z - 300mm Drive - Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) Drive transmission - The most precise NIDEC SHIMPO planetary reducers Runner system - PMI 25mm linear guides and carriages with helical inclined strips with maximum contact surface Electric spindle - 9kW, 24000 rpm on full ceramic bearings Guide lubrication system - Automatic Tool length measurement system - Automatic Control system - NK-105 G3 controller Cables - Fireproof, adapted to bending and protected against deformation Manufacturer: TechnologieCNC Model: 2140 INDUSTRY 2.0 ATC Max. working speed in free passes: up to 33m/min Max. working speed in material: up to 25m/min Ncsdpfetvmcmjx Ahwen Program resolution: 0.01mm Mechanical resolution: 0.04mm Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (ramp entry function, automatic NESTING) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz A German vacuum pump BECKER VTLF 2.250 of the renowned BECKER brand with a capacity of up to 244m3/h is included in the standard equipment of the machine.

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Ncjdpfxotu S Srs Ahwen Included with the Milling Machine Becker KVT 3.140 Vacuum Pump Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1500x3000x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport - 365 / 210 / 220 Machine assembled and ready to work - 365 / 245 / 230 Hybrid table, i.e. vacuum table enabling non-invasive element fixing, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller A tool height sensor is included A central oil lubrication system for trolleys and guides as standard The drive is transferred via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Hybrid table, i.e. vacuum table, enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Ncsdpotu I Husfx Ahwjn Central oil lubrication system for trolleys and guides as standard Drive transmission is via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation Manufacturer: TechnologieCNC Model: 1325 INDUSTRY 2.0 Electric spindle: 6kW, 24000 rpm. on full ceramic bearing Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1300x2500x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 Controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz For transport - 307 / 190 / 220 Machine assembled and ready to work - 307 / 225 / 230

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Nedpfxetu H Tuo Ahwscn Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: like new (used), Year of construction: 2019, functionality: fully functional, operating hours: 300 h, number of axes: 3, number of slots in tool magazine: 12, table length: 3,100 mm, table width: 2,100 mm, year of last overhaul: 2019, Equipment: cabin, IMasterwood 21.31 KS nesting cnc machine, manufactured in 2019, commissioned in 2020, in perfect condition, 1200 working hours. Drilling unit. XYZ dimensions (mm) 3100-2150-100. Nedpfx Ahsylvmcowecn Tool magazine - maximum quantity of tools 12. The machine is configured with an automatic system with loading and unloading suction cups to be able to operate with the loading and unloading table. 4 vacuum zones. The machine is in operation in Brașov, it can be tested.

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module Nedpjyfgzdjfx Ahwscn 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center with extensive features and in notably excellent condition. — Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Traversing paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix nesting or console table • Optional: edge banding and labeling — Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is available immediately. Dismantling and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors excepted. Ncjdpfx Ahjxk Tumowon

Year of construction: 1996, condition: used, Control unbekannt weight 1,8 t Njdpjyacptjfx Ahwocn capacity 7,0 kVA

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm Ncjdpfx Aeyaq Dxehwon • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 100 mm, number of axes: 3, spindle speed (max.): 24,000 rpm, This IMA BIMA 410 V was manufactured in 2005. It is a CNC woodworking machining center with integrated edge banding. Features include a working area of X-axis up to 6000 mm, Y-axis 1400 mm, and Z-axis up to 100 mm. It has a main spindle power of 7.5–11 kW and a speed range of 1,500 – 24,000 rpm. The tool changer has 18 positions. Edgebanding capabilities range from 0.4–3 mm in thickness. Contact us for more information. Machine Benefits Technical Machine Benefits Nedpfx Aoyap U Aohwecn • Automatic rotary changer, 18 positions • Vertical drilling head with up to 21 spindles (11+10) Extra Information Edgebanding Unit VT 100 For 4-sided and frontal edging Edge thickness: 0.4–3 mm Edge height: 14–64 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Machining center Biesse Rover B 4.40 Working area X: 3640 mm Working area Y: 1342 mm Working area Z: 150 mm Beam worktable with suction cups 3-axis electrospindle Njdpfx Ahsykqfdjwocn Vertical drilling heads: 13 Horizontal drilling heads in X direction: 4 Horizontal drilling heads in Y direction: 4 Fixed blade in X direction 12-position tool changer Software: BIESSEWORKS ADVANCED Vacuum pump BECKER VTLF 250 Safety mats Protective nets attached to the machine

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 380 mm, number of axes: 5, This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. • 5-axis fork head (replaced in 2019) Ncsdsx D Hxfspfx Ahwsn • Rear spindle with Flex5 unit • 2 traveling plate changers, 18 slots each • Second vacuum pump, switchable individually Additional equipment • Computer with Windows 10 (new ~1.5 years ago) • WoodWOP 8.1 software

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Ncjdpfxeqvnl Ts Ahwen

Year of construction: 2001, condition: ready for operation (used), Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible. Njdop S Sq Iepfx Ahwscn

Condition: new, Year of construction: 2025, functionality: fully functional, FOR IMMIDIATE DELIVERY EX OUR WAREHOUSE IN DENMARK: DEMO MACHINE - MACHINE SUPPLIED WITH ROBOT (OR WITHOUT ON REQUEST) General: • Total power: 52.36 kW • Power supply: 380V / 50Hz / 3PH • Air supply: 0.6–0.7 MPa • Total weight: 7,850 kg • Machine size: 7400 × 4,620 × 2,650 mm Control system • Brand: SYNTEC Panel size • Length: 250 – 2,800 mm • Width (X/U): 250 – 650 / 1200 mm • Thickness: 10 – 60 mm Max. traveling speed • X axis: 135 m/min • Y axis: 75 m/min • Z axis: 30 m/min Transmission mode • X axis: Rack and pinion • Y axis: Rack and pinion • Z axis: Ball screw rod Drilling blocks • Boring block qty: Top 2+2 / Bottom 1+1 Drills • Top vertical drills: 19 × 4 • Top horizontal drills: X: 3 × 8 + Y: 2 × 4 • Bottom vertical drills: 9 × 2 Drill specifications • Max. drill diameter: Ø35 mm • Drill spacing: 32 mm • Rotation speed: 5000 rpm Nodpfxoyhb I Re Ahwocn • Shank diameter: Ø10 mm • Tool holder: 4 × ER25 • Spindle power: o 2 × 3.5 kW o 2 × 5.5 kW o Max. 18,000 rpm Dust collector • Quantity: o Top: 4 × Ø200 mm o Bottom: 2 × Ø125 mm • Air speed: ≥ 28 m/min SUPPORTING INFORMATION ACCORDING TO PDF ATTACHED

Condition: used, Year of construction: 1996, coolant ja Axis 3 9041 x-travel 800 mm y-travel 550 mm Ncjdpfx Ahsx U A R Uewjn z-travel 500 mm The machine is in a dismantled state.

Year of construction: 1980, condition: good (used), Control NCT table-size 700 x 500 mm Njdpfjxzu D Dsx Ahwecn coolant ja Tool bore SK 50 2 clamping devices 20-position tool changer

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm Nedpfx Aswhqz Uehwocn

Year of construction: 2000, condition: used, serial number 143-86 x-travel 550 mm y-travel 300 mm z-travel 425 mm Number of working hours 58046 h cooling Innen nein max. 10.500 nein control Simens Sinumerik 810D Njdpfsr D Tu Dsx Ahwecn weight 4600 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 3,686 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis BUSELLATO easyjet 5.12 was manufactured in 2013, designed for high-accuracy operations in panel processing. It features a CNC-controlled spindle, optimized for drilling, milling, and nesting, with a travel range of 3686mm on the X-axis and 1555mm on the Y-axis. Ideal for wood, MDF, plywood, and composite panels. Consider the opportunity to buy this BUSELLATO easyjet 5.12 CNC Wood Machining Centre. Contact us for more information about this machine. Additional equipment • Material Handling: Optimized for wood, MDF, plywood, and composite panels • Software Integration: Nesting software integration for optimized cutting patterns • Safety Features: Safety enclosures and interlocks Machine Benefits Technical Machine Benefits Ncsdjyaiptspfx Ahwon • Precision: high-accuracy operations for drilling, milling, and nesting • Control system: cnc interface (busellato proprietary or compatible) • Control system: cnc interface (busellato proprietary or compatible) • Clamping: vacuum or mechanical clamping for panels • Spindle: cnc-controlled, suitable for drilling, milling, and nesting • Tool changer: automatic tool changer (depending on configuration) Extra Information Machine still under power

Condition: used, Year of construction: 2018, - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 Ncedpfsxtbgpox Ahwen - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,500 h, This 5-axis SCM Morbidelli M100 was manufactured in 2019. It features a large working area of 3110 × 1620 mm, 21 vertical and 12 horizontal spindles, and a maximum rotation speed of 8,000 rpm. The machine includes vacuum suction cups and has been used for approximately 1,500 hours. Consider the opportunity to buy this SCM Morbidelli M100 CNC Wood Machining Centre. Contact us for more information about this machine. • Machine Condition: Excellent, very little use • Configuration: 5-axis CNC machining centre • Working Area (X × Y): 3110 × 1620 mm • Vertical Spindles: 21 • Horizontal Spindles: 12 Nsdpfxjyab Axo Ahwecn • Maximum Rotation Speed: 8000 rpm • Vacuum System: Including vacuum suction cups