Used Horizontal machining centers with shuttle table (wood) for sale (223)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Rcjdpfo Aggu Aox Abajh Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of the portal including unit and tool changer: approx. 15,000 kg Weight of the control cabinet: approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 liters/hour (uncompressed) Control system type: BWO CNC 920 Controlled axes + max. travel distances: approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Rcedpfjv Rlpyex Abash Milling motor: HSK 63F / 12 kW from 12,000 revolutions per minute, speed range 1,000 - 20,000 revolutions per minute Lubrication: grease lubrication Tool holder: HSK 63 F Tool magazine: chain magazine with 32 positions / 160mm Machine table: 2 clamping stations with 6 support crossbars with clamping / pneumatic clamping devices Workpiece dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° Currently, the machine is not operational. The spindle including the conversion kit must be replaced with newer software (can be requested from Maka). The machine can be inspected in DE94424 Arnstorf by appointment. All information is without guarantee. Sale exclusively to commercial businesses (B2B). Sale only within Europe. The buyer organizes and bears the costs for the entire dismantling, collection, loading, and transport. Inspection and collection by arrangement in 94424 Arnstorf (Germany).

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Rcjdpfx Abez E Rinoaoh Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm Rcjdpfxj Afabas Abash 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-250-04-1744, functionality: fully functional, input voltage: 400 V, number of axes: 4, number of slots in tool magazine: 8, total length: 7,500 mm, total width: 4,600 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, For sale: Weeke Optimat BP 150, the largest model, a 4-axis, liquid-cooled machining center with 12 beams and two vacuum pumps, one of which has undergone a major overhaul. The machine is in continuous operation. The gross price includes 23% VAT. This is a reliable and durable machine; parts are readily available through the Hommag network and on the open market at very reasonable prices. I recently replaced the vertical drive shaft and other minor parts. It is a solid, heavy-duty, and rigid machine. The headstock covers are removed but are included as a complete set. The machine is still in continuous operation, working at 25% capacity. Rsdpfsz Tfiasx Abaech It has 12 vertical drilling units in the X-axis, 24 vertical drilling units in the Y-axis, and 12 horizontal drilling units. It also includes a grooving saw and a milling cutter. Two safety mats require repair or replacement. The price is 5,000 Euros, and loading onto a truck costs 890 Euros. I am selling it because I am closing my business due to my age.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 300.07.009.10, functionality: fully functional, - 3-axis FORMAT4 PROFIT H22 2012 with rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking for high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT. - Frequency (Hz): 50.0 Hz - Phase (Ph): 3.0 - Power (kW): 15.0 kW Rcjdsz Nwa Nepfx Abaoh - Duty Cycle: S6-40% - Current (A): 36.0 A - Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups - Tool Changer: Linear rack tool changer mounted under the gantry rail, plus an additional pick-up/aggregate station. Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking. Machine Height: 2350 mm Machine Length: 6000 mm Number of Axes: 3 Tool Stations: 8 Spindle Power: 12 kW Spindle Speed: 24000 RPM X-axis Travel: 3060 mm Y-axis Travel: 1210 mm Z-axis Travel: 100 mm

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts Rcjdpfe Af Ii Njx Abajh 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2023, functionality: fully functional, operating hours: 1,031 h, workpiece length (max.): 2,500 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 700 mm, number of slots in tool magazine: 18, Equipment: documentation/manual, 5-AXIS MILLING PLOTTER 2531 Specifications: 2500 X 3100MM, Z-AXIS RANGE 700MM HITECO 13.5KW S6 TILTING/ROTARY HEAD SET A-AXIS RANGE: +/–120°, C-AXIS RANGE: +/–320°, ROTARY TILT T-JQX 29L0549395D ELETM QX-2 11/12 24 63F NC HSK63 FOR 5-AXIS MACHINES AIR CONDITIONING FOR THE CONTROL CABINET ACTIVE COOLING SYSTEM – CHILLER CW-6000 (FOR SPINDLES UP TO 20KW) LINEAR TOOL MAGAZINE, 18 POSITIONS, FOR 5-AXIS MACHINES ROTARY TOOL MAGAZINE, 16 POSITIONS, HSK63F AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM (FOR 5-AXIS MACHINES OR MACHINES WITH A TILTING ELECTRO-SPINDLE) WALTER SKTG 5.5 P COMBO SCREW COMPRESSOR WITH DEW POINT DRYER REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) BUSCH MV 0312B-5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) 2131 EXPERT MILLING PLOTTER, WORKING AREA 2100X3100MM Specifications: WORKING AREA 2100X3100MM - Z-AXIS TRAVEL RANGE 300MM, EXPERT, PRO - OMRON SERVO AC HIGH-SPEED DRIVES (COMPLETE WITH PLANETARY GEARBOXES) 1.5KW ETHERCAT - 2131 RASTER VACUUM TABLE - POROUS SUPPORT PLATE (1200 X 2500 X 12 MM) - PNEUMATICALLY CONTROLLED VACUUM SECTION, 6 PCS - CONTROL SYSTEM FOR TWO PUMPS UP TO 11KW TOTAL (PROTECTIONS + SOFT START + PRESSURE RELIEF VALVE) - BUSCH MV 0312B -5.5KW VACUUM PUMP, CAPACITY 290M3/H, MAX. ULTIMATE PRESSURE 150MBAR (ABS) - INDUSTRIAL REAL-TIME CONTROL SYSTEM (MS) OSAI OPENSMART, CYCLE TIME BELOW 2MS, UP TO 16 AXES SUPPORT, ETHERCAT COMMUNICATION WITH A SMALL CONTROL CABINET - HITECO 7.5KW S6-ATC ELECTRO-SPINDLE SET, UP TO 24,000 RPM, FAN-COOLED, TOOL MOUNTING - LINEAR TOOL MAGAZINE, 6 POSITIONS - ACTIVE OSCILLATING KNIFE – PNEUMATIC - OPTION FOR OSCILLATING KNIFE: CREASING HEAD - OPTION FOR OSCILLATING KNIFE: DISC KNIFE (INSTEAD OF THE WRITING HEAD) - PNEUMATICALLY MOVED EXTRACTION FOOT (WITH OUTLET FOR CONNECTING AN EXTRACTION SYSTEM/VACUUM CLEANER) - PREMIUM COOLING MIST, 1 PCS - BASE POSITIONING CONTROL - POSITIONING BASE 25MM, 1 PCS (MINIMUM 3 PCS) - OSAI LASER FOR POSITIONING - AUTOMATIC CENTRAL LUBRICATION SYSTEM WITH SKF GREASE - CAD/CAM VECTRIC CUT 2D PRO - SAFETY ENCLOSURE WITH ELECTRONIC SAFETY SYSTEM - HSK-F63 STARTER KIT (5 HSK-F63 TAPER HOLDERS + 18 ER32 COLLETS IN THE RANGE OF 3-20MM) ELECTRIC CHAMBER OVEN FOR HEAT TREATMENT, SwissTherm PKK-7500 Specifications: Chamber Dimensions: 2500x1000x3300 Maximum Temperature: 180 Voltage: 3/N/PE AC 400/230 V, 60 kW, 100A Peel3 Scanner Software: DPS Software, SolidCam 3D, Solidworks Professional, DraftSight Enterprise Rsdjz Suyrjpfx Abaech Schmalz Conveyor Jumbo Ergo 65kg vacuum manipulator system with a lightweight aluminum boom for ergonomic operation HP A3500 ZBOOK FURY 16 G10 Mobile Workstation, 1TB, 132GB, NVIDIA RTX

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps. Rodsz H Rp Djpfx Abaoch

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Rcedpfex Nw Drjx Abaoh Condition: ready for operation Machine type: machining center If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1995, input voltage: 400 V, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: BWO, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 Rcedpfez R Dqqjx Abajh The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Collection from 41334 Nettetal, workshop edge. Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 302.11.021.16, functionality: fully functional, operating hours: 573 h, power: 12 kW (16.32 HP), input voltage: 400 V, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 12, For sale is our FORMAT4 profit H200 13.33, manufactured in 2016. The CNC machine was primarily used in our carpentry shop for furniture and interior design and has relatively few operating hours. Equipment includes: Redpsz Imtnsfx Abaech * 4-axis CNC * additional swivel unit * tool changer * console table with vacuum clamping system * vacuum pump included * control station including PC and handheld device * including tool set * only 572 operating hours The machine is being sold due to the closure of our carpentry shop for health reasons. It is currently connected and ready for operation and can be inspected and tested by appointment. Location: 48308 Senden Dismantling, loading, and transport will be carried out by the buyer at their own risk and expense. Price: €30,000.00 net, negotiable / €35,700.00 gross, including 19% VAT. An invoice with VAT will, of course, be issued.

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. Rjdpfxez R I U Ij Abasch ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-axis machine with a table length of 4,469 mm in the X-axis and 1,560 mm in the Y-axis, including 2 tool changers. Working dimensions: X-axis: 4,469 mm Y-axis: 1,560 mm Z-axis clearance: 180 mm Work table: 8 workpiece supports 8 rear workpiece stops, programmable, installed in each support 8 middle workpiece stops, programmable, installed in each support, positioned approximately 520 mm from the rear 1 + 1 lateral workpiece stops Lifting rails, pneumatic, programmable, for positioning heavy workpieces Vacuum pump 250 cbm/h Equipment for machining head: Drilling head with: 18 vertical drilling spindles, each individually controllable 2+2 horizontal drilling spindles in the X-direction 2+2 horizontal drilling spindles in the Y-direction Fixed nut saw in the X-direction 5-axis milling spindle 11 kW, HSK 63 F Rotational speed 1,000 - 24,000 rpm Bidirectional rotation Rjdpe Agu Akjfx Abasch Saw blade diameter, max. 300 mm Tool magazine, 12 positions, mounted on the machining support, moving in the X-direction Tool magazines, 10 positions, mounted laterally on the machine table on the left side Safety devices: * Support equipped with a bumper system * Protective fence on the side, rear, and left with an access door Control system: XILOG MAESTRO Without tools and aggregates Additional equipment: * Handheld terminal for controlling basic functions, such as manual movement, feed rate, and milling spindle speed

Condition: ready for operation (used), Year of construction: 2004, IMA Bima 210 Bouwjaar 2004 Freesbereik 3000 x 1200 Rjdjz E U A Sjpfx Abaech C-as Vloeistof gekoelde freesmotor Boorunit Vacuumpomp 6 supports Schmalz vacuumcups HSK 63-F Zaagunit Machine in nette conditie Haakse unit Beschikbaar eind December 2026

Condition: used, Year of construction: 2019, functionality: fully functional, This Biesse machine must be sold by the end of the year – a great opportunity to invest in 5-axis technology at an extremely attractive price! Many accessories are already included: tools, frame clamps, vacuum suction cups, and other equipment. Come and inspect the machine and request your personal quote; you can find more information on our website gsbern.swiss. Best regards, Renato and Joël GSBern – Consultants for Woodworkers Rsdo Afaapspfx Abajch

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Work area X: 4320 mm Work area Y: 1500 mm Z-axis workpiece clearance: 180 mm 13 kW, 5-axis electro-spindle, HSK F63 connection Rcodpfx Abj Agncksajh Vertical drilling heads: 20 Horizontal drilling heads X: 2 Horizontal drilling heads Y: 2 2 blades for grooving in X and Y directions 16-position revolving tool changer Work table with 8 stops NC-Hops 6.0 5-axis machine license, 1 × NC-Hops for office use, 1 × aCADemy 250 m3/h vacuum pump Chip conveyor belt Safety mats Protective screens Approximate weight: 3950 kg 3695 hours of 5-axis spindle operation and 2027 hours of drilling operation.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid Rcedpfx Absz Rrbwjaoh with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: used, Year of construction: 2016, CNC machining center Rcodps Ad Iw Tofx Abaeh Manufacturer: Biesse Type: Rover A1432 Year of manufacture: 2016 Technical data 3-axis machine HSD drilling head - Maximum motor speed: 6,000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80-120 mm Drive power: 17.3 kW Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Year of manufacture: 2016 Technical data Redpfxj Ad Iw Hj Abasch - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 80 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,490 mm, travel distance Y-axis: 1,930 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 3,090 mm, workpiece width (max.): 1,530 mm, workpiece height (max.): 85 mm, number of axes: 3, total length: 5,550 mm, total width: 3,850 mm, overall weight: 2,460 kg, table length: 3,090 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, For sale is a nearly unused Felder Format4 CNC profit H08 16.38 F4I CNC woodworking machine. The machine was manufactured in 2023. The package includes the machine, a Felder RL 250 dust extraction filter, and a scissor lift table. The machine was purchased and was unused. Rjdpfx Aozy Hdaobajch

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Rcsdpfx Abjzwcfzjaeh Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: used, Year of construction: 2013, functionality: fully functional, CNC machining center Biesse Rover A 4.30 with accessories and tooling, see photos. Year of manufacture 2013, fully equipped and in perfect working order. Equipped with a lock box unit, sawing unit, and tool changer with 24 positions. Rcede Aaz Svepfx Abajh Includes Palettcad software. Location: Freising Inspection is welcome. We have other used machines available. Please contact us.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 24406, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, input frequency: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working range (axis travel) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) Rjdoykn Dwspfx Abasch 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, and board nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Typical features and equipment • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling aggregate (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chips conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture commonly found in offers: approx. 2010–2016 (often 2014) • Applications: furniture production, MDF panels, HPL, solid wood, nesting

Condition: used, Year of construction: 2008, machine/vehicle number: 97457, functionality: fully functional, input voltage: 380 V, input current: 52 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, number of slots in tool magazine: 120, actuation type: electric, total height: 2,600 mm, total length: 6,500 mm, total width: 7,500 mm, overall weight: 12,000 kg, Equipment: CE marking, documentation/manual, FTT Insider R8 drilling center with transverse feed, equipped with 4 upper tool heads. Each head features: a) two sets of vertical drills with a 32mm spacing: 18 spindles in the Y-axis, 14 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 3.8 kW and an ISO30 chuck. The machine also has two horizontal drilling units, each consisting of two units equipped with 18 spindles with a 32mm spacing. Rcjdpfx Aozypnbobajh The machine is equipped with two chain-type tool magazines for vertical drills: 60 positions each. Belt conveyors at the inlet and outlet allow for manual loading of parts; it is also possible to operate the machine in a production line.