Used Accessories and spare parts for sale
7
Air capacity 129 m3/h
Engine power 4,0 kW
Power supply 50 Hz, 400 V
Bs9afek890
Noise level 76 dB(A)
Overall sizes L=873, B=470, H=336 mm
Weight 111 kg
5
milling spindle COLOMBO HSK63F 7,4KW 24000 upm at 400Hz
Begr3duodj
The E-spindle was completely refurbished
- new spindle bearings (ceramic, manufacturer GMN/ SKF)
- new balanced
- new motor winding
- new spring assembly
- new gaskets for the output cylinder
- sensor system adjusted
warranty 6 months in single shift operation
3
Operating panel
Touch display
Cazyccotpn
PC manufacturer -Beckhoff
7
Refurbished tool change spindle HSK F63,
incl. liquid circulation cooling:
Tool holder: for HSK taper
tool infeed: automatic
direction of rotation: right/left
Speed range: infinitely variable 12000 -
24.000 1/min, programmable
Bvhj7xqo9r
drive: frequency controlled
spindle lubrication: grease permanently lubricated
Cooling: liquid circulation cooling
Bearing: hybrid bearing (ceramic)
with C-axis support
Spindle is newly mounted and generally overhauled!
13
One servo motor is not working. Everything else was good. Selling for parts.
Xeftnint
Lots of spare parts are included.
10
Offered are all components of a functional Homag BAZ 20 with interchangeable gluing part. Machine has run until 2021 and has been replaced by a newer one.
- 2 milling units, one of them with electronic interface
- control cabinet and control panel
- gluing unit
- tool changer
B93nm7c3rz
- cable drag
- drive motors
- vacuum pump
- spare spindle
- various spare parts
9
High precision bearings Axial angular contact ball bearings
FAG Aerospace / Super Precision Bearings
Vtaxjq
4 pieces FAG Aerospace 7602030-TVP
ID 30mm, AD 62mm, width 16mm
6 pieces FAG Aerospace 7603020-TVP
ID 20mm, AD 52mm, width 15mm
Stock from the closure of a furniture factory.
The boxes were labeled with " Maka Z-axis". Therefore they are probably meant for Maka machining centers, but surely they can be used for other purposes as well.
The cartons have been partially opened, but the bearin...
6
Milling spindle scm, Morbidelli ISO 30 with gearing, 7,5KW, 18.000 upm
Version RTN INVER STC with Vector
Bcp0b8ch7f
**new bearing, balanced, cone ground, springs clamping set new**.
warranty 6 months
10
I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc.
B8zszzc7j0
n 12.000 rpm.
Radius R2mm.
HSK63 holder.
Available immediately.
3
LED units for table replacement or addition
Vqii0q
6
Milling spindle ES 919 , overhauled at company HSD;
Bzg8zw2isd
8
Becker type VTLF 2.250 vane - oil-free.
Rotary oil-free vacuum pumps.
Simplicity of execution, only one shaft and direct drive transmission - very durable vacuum pumps, characterized by low operating and maintenance costs.
These pumps are 100% oil-free.
They are equipped with long-life graphite blades, integrated air filters and regulating valves. This ensures trouble-free cooperation with additional accessories.
Compact housing guarantees low noise level and low heat emission.
The corrosi...
5
Milling spindle scm, Morbidelli ISO 30 with gearing, 7.5KW, 18,000 upm
Version RTN INVER STC without Vector
**new ball bearings ceramic, balanced, cone ground, springs clamping set new**.
Cfnsxzk8
Warranty 6 months
5
IMA computer for milling and / or gluing machines of the 310-680 series. Ideal as an exchange of the no longer available IMA computer and hard disk. Included in the delivery is a version IMAWOP 3.0 with software dongle. The computer is tested and stored for about 10 years.
Scope of delivery: Computer (PC)
keyboard
IMAWOP 3.0
software dongle
on request screen
against extra charge computer control cabinet
Bduwoac9n2
keypad
15
various spare parts for Biesse machines
Byyjtthbpy
2
Stop 25/70 Pneumax Prism without accessories
taken from a scm Record 110TV when it was scrapped
Bags23klox
2
Tool fixture: HSK F63, taper diameter = 38 mm
similar to DIN 69893
Tool feeder: automatic
Retracting force: 11000 N
Tool weight: max. 6 kg
Direction of rotation: right / left rotation,
programmable
Speed range: infinitely variable 1500 - 24000 rpm,
programmable
Drive: frequency controlled
Three-phase motor
Drive power: 7.5 KW in S-1 mode
Spindle lubrication: unique
Factory grease lubrication
Spindle cooling: water cooling
W7vebnz3f
Constant power of 12,000-24,000 rpm
Image is for orientati...
15
Sell various used parts for Biesse CNC.
- HSD original tool holder for HSK F63
-milling spindle ES 362L 5 axis , GENERAL OVERHauled
- Inverter Yaskawa
-various Servopack
-Servomotors
-stepping mat switchgear ....etc.
-machine computer, XNC control
-tool holder made of aluminium for ISO 30 / SK30
Niu3n
- Stops for work table (up to approx. year 2001)
-Suction trolley (up to approx. year 2001)
-milling spindle ES 919 SK30
-ring for the admission of angle aggregates (is screwed on the milling spin...
4
GRP0014478
Electric spindle CMS Hiteco HSK F63, 12 kW S1; 24000 rpm at 800Hz
water cooled
completely overhauled spindle
B9ymv7x973
Exchange price!
3
Spare part for IMA 680 / 480/ 980 ( 410 under reservation )
Edgebanding Unit
For edgebanding on shaped panels with fresh hot melt glue coating onto the
edging material within the machine.
Unit consisting of:
Pressure roller: 100 mm diameter
Pneumatically controlled post pressure roller: 35 mm diameter
Hot melt glue applicator for the coating of edging material with temperature control
Servo-drive for edge feeding with automatic adaptation to the path control
IR radiator 600 W at the decorated...
13
High end Vacuum suction cups for Biesse CNC
G7stajx
3
E-spindle Hiteco HSK F63, 8/12 kW; 24tupm at 800
Cooling by built-in fan
Fxddy7w
13
Main spindle Omlat
Tool holder: HSK F63 ., Cone diameter = 38 mm
similar to DIN 69893
Tool feed: automatic
Retraction force: 11000 N
Tool weight: max. 6 kg
Rotation: forward / reverse operation,
programmable
Speed range: infinitely from 1,500 to 18,000 rpm,
programmable
Drive: frequency controlled
Three-phase motor
Motor power: 12 KW in the S-1-operation
Spindle lubrication: unique
Ci03kne
Factory grease lubrication
Spindelkuehlung: Water cooling
Constant power of 12,000-18,000 rev / min.
S...
4
QE2 12/6 18 63F NL
B7e9kzwafb
Electric spindle Hiteco HSK F63, 12 kW S1; 18tupm at 600Hz
water cooled
completely overhauled spindle
Exchange price!
3
Milling spindle scm, Morbidelli ISO 30 with toothing, 7.5KW, 18,000 rpm
Version with 'ZERO SPEED' sensor
**new hybrid ball bearings, balanced, sensors adjusted**
Warranty 6 months
Eimtbriv
Exchange price, only applies to the return of an economically repairable defective part!
4
E- spindle scm prism KT-2 HSK63F 11kW 20,000 rpm
Jxmugi
29L0122737D 10L0122737C
The spindle is completely refurbished.
Exchange price!
2
Horizontal drilling head R100 / 110/130 Sx
taken from a scm Record 100 when it was scrapped.
2736217514G
Vut97q
4
E- spindle Hiteco HSK F63, 10/12 kW; 24tupm at 800Hz
cooling by integrated fan
10L0036762A
Oyd0b
Exchange price!
4
milling spindle scm HSK63F 8,5KW E1-NL with fan
ELECTROSPINDLE HSK63F 8,5KW E1 NL GREASE/AIR
**new ball bearings ceramic, balanced, cone ground, springs clamping set new**.
Bnd0t0mrwi
warranty 6 months
Exchange price, only valid for return delivery of an economically repairable defective part!
2
Vecktor flange scm Record 110 reconditioned
Warranty 6 months
Dgmwoeh
exchange price!!!
4
Milling spindle of scm HSK63F 7,5KW 18000 rpm with 600 Hz
The electric spindle was rebuilt completely
-new spindle bearings (ceramic, manufacturer GMN)
-new balance
-New spring package
-Seals expression cylinder new
-Set sensors
Warranty 6 months in single-shift operation
Hgpwltf
Exchange price, applies to only return of economically repairable defect part!
4
QE-1F 8/12 24 63F NC CB
E- Spindle Hiteco HSK F63, 8/9,5 kW; 24tupm at 800Hz
Cooling by integrated fan
completely overhauled spindle
Vth0rm
Exchange price!
2
Vecktor flange scm Record 220 and Routomat reconditioned
Warranty 6 months
Bv828vcc
Exchange price!!!
2
Vecktor flange scm Record 2 reconditioned
Bk9orw8h
Warranty 6 months
exchange price!!!
2
cylinder clamping/releasing E- spindle 11kW X5 prism
Expulsion cylinder
The cylinder was completely refurbished
- Seals new
- Air connections new
- Thrust piece new
Qnef3ugb
Warranty 12 months
Replacement price, applies only if an economically repairable defective part is returned!
4
E- Spindle Hiteco HSK F63, 10/12 kW; 24tupm at 800Hz
Cooling by integrated fan
Oelfv
29L0286113H
3
Cylinder feed stroke Spindle STC,
used, tested
Gruqqg9
taken from a Morbidelli Author 504 STC during its scrapping
4
SIRCO SSS4T075/S frequency inverter
Taken from a scm R9 Cn
Ntloj
used, tested
4
Ball screw Y Tech 100 Super L=1850 D=25 P=20 Used, tested, almost free of play
Hvoqzuqt
2
Cylinder load compensation Z-axle Morbidelli D=50 H=150
Manufacturer diottalevi, 9111102
D=50, H=150
Wztm3d7u3
reconditioned, new gaskets and piston rod
2 pieces in stock
4
Morbidelli author 600 tool changer servo motor
Bdtgc82k9u
Siboni 30PL082 DT14 worked on
3
Morbidelli author 510 tool changer servo motor
Siboni 30PL082 DT14 used, tested
Bdb9newyt2
3
Braking unit z axis from one scm record 120
Spare part number according to the spare parts list 2784750002 H
L9vfqmcl
features reclaimed second hand part, springs, gaskets, brake pad new!
6 months warranty
2
Cylinder load compensation Z-axis scm Record 1
Manufacturer Pneumax, article number according to type plate 2736232510G
L7vjb
The cylinder is reconditioned.
Exchange price!
2
Cylinder group hood control Morbidelli author 600
Article number according to the spare parts catalogue machine: 2731130260 B
features reclaimed second-hand parts, seals and Kolbenstangeb new
Delivery in Exchange, exchange price!
6 months warranty
Wgs9flq
2
Cylinder Vorlegehub spindle STC
University U3010214
completely rebuilt new seals, new pistons,
6 months warranty
Exchange price!
Myidj