Used Bernardo Ebs 150 Gc for sale (225)

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position Lsdpfx Aisxabf Ee Rsag - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, capacity 90 degrees: round 100 mm capacity 45 degrees: round 65,0 mm capacity 90 degrees: flat 100 x 150 mm capacity 45 degrees: flat 60 x 100 mm dimensions of saw-band 1470 x 13,0 x 0,65 mm volt 230 V 45,0 m/min weight 26,0 kg Lajdjxaa Apspfx Ai Rog range L-W-H 700 x 320 x 420 mm scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm Ljdpfx Asxabkzei Reag total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, Special promotional price for in-stock items! While supplies last! Price ex warehouse, plus VAT. Belt sanding machine: Bernardo Type/Model: MS 150 x 2000 S-2 Condition: New Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 155 mm Platen sanding table: 460 x 150 mm Dust extraction connection Ø: 100 mm Motor output S1 100%: 2.1 / 2.8 kW Motor input S6 40%: 2.8 / 3.6 kW Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, ideal for sanding stainless steel - Universally applicable for sanding edges, surfaces and for round sanding - Graphite coating on the platen sanding surface increases the gliding properties of the sanding belt - Consistent belt tension thanks to spring-loaded tensioning device - User-friendly belt change, quick and easy - Good sanding performance thanks to high belt speed - Quick adjustment for horizontal and angled position - Universally applicable for crafts and industry - Large-sized platen sanding surface with protective cover - Including fine adjustment for parallel belt running Scope of delivery: - Sanding belt K 80 - Foldable protective disc - Sanding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized sanding roller - Graphite coating - Separate on/off switch - Base frame Promotional price ex warehouse Mindelheim, free on board. Art. 05-1249 Lajdpfx Aieb Hhh De Rsg

Condition: new, Bernardo belt grinder MS 150 x 2000 S-2 Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel diameter x width: 200 / 155 mm Flat grinding table: 460 x 150 mm Dust extraction port diameter: 100 mm Motor output power S1 100%: 2.1 / 2.8 kW Motor input power S6 40%: 2.8 / 3.6 kW Laodod Rw Rhjpfx Ai Reg Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h Ljdpfx Aspag Ttoi Reag speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, input voltage: 400 V, control type: manual, overall weight: 85 kg, Equipment: CE marking, Simple, ergonomic, and economical metal band saw EBS 128 CL by BERNARDO. Angle cutting is possible from -60° to +45°, adjustable via the saw arm. Cutting capacity at 90° up to 125 mm (flat piece 150x100 mm). The main advantage of this saw, besides setting the cutting angle with the saw arm instead of repositioning the material, is the integrated cooling system as standard. This makes the EBS 128 CL an ideal choice for semi-professional craftsmen – combining performance, ergonomics, and ease of use. Key features: • Mitre cuts possible within the range of (+45° to -60°) • Stepless adjustment of the saw arm with a hydraulic cylinder • Automatic end-of-cut shut-off – limit switch • Robust, torsion-resistant saw arm • Three cutting speeds adjustable by V-belt drive • Sturdy machine frame guarantees precise, quiet, and vibration-free operation • Supplied as standard with quick-action vice and workpiece stop • Standard integrated coolant system • Equipped to the latest safety standards with a separate emergency stop button (CE compliant) Technical Specifications: Cutting capacity round 90° 125 mm Cutting capacity flat 90° 100 x 150 mm Cutting capacity round 45° R 95 mm Cutting capacity flat 45° R 95 x 76 mm Cutting capacity round 60° 50 mm Cutting capacity flat 60° 50 x 56 mm Working height 740 mm Band saw blade dimensions 1638 x 13 x 0.65 mm Blade width 13 mm Cutting speed 23 / 35 / 55 m/min Motor power 0.75 kW Continuous rating S1 100% 0.55 kW Voltage 400 V Dimensions (W x D x H) 980 x 550 x 1100 mm Weight approx. 85 kg Scope of Delivery: • Band saw • Quick-action vice Laodpfx Asyr Nq Uji Rsg • Workpiece stop • Automatic end switch • Mobile machine base • Hydraulic cylinder • Cooling system • Separate emergency stop button (CE compliant)

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points Ljdpfx Aijxab Nqe Rjag - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: new, turning length 1500 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1400 kg range L-W-H 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 Ledpfx Aoxab Umsi Rjag - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 185 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Lodpfexaau Esx Ai Rsag Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, turning length 1500 mm turning diameter 410 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52,0 mm turning speeds 30 - 3000 U/min bed width 250 mm Ljdpjxaaldsfx Ai Roag spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 120 mm total power requirement 5,5 kW weight of the machine ca. 1400 kg. range L-W-H 2530 x 1000 x 1450 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2 centering points - Chip back wall - Operating tool * Images show identical machine

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25 - 1600 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 Lsdpfx Aexaam Iji Rsag quill: 5 MK weight of the machine ca. 2.370 kg. range L-W-H 2.840 x 1.150 x 1.460 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight approx.: 1845 kg Features - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including feed gearbox - Central, user-friendly control for feeds and threads with leadscrew and feed rod Ljdpfsxl Dyvex Ai Roag - Oversized, hardened and precision-ground gears - Simple, smooth, and precise speed and feed adjustment - Rapid traverse longitudinal and cross as standard to reduce non-productive times - One-piece, heavily ribbed machine bed for high torsional stiffness and vibration damping, providing the basis for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. through-hole dia. 150 mm • Follow steady – max. through-hole dia. 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake conforming to CE standards • Foot pedal with braking function, CE compliant • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Titan 560 x 1500 Pro Vario Technical Specifications Distance between centres: 1500 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill travel: 185 mm Quill taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions: length 2840 mm; width x height 1150 x 1610 mm Weight approx.: 2420 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, actual speed is displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of workpieces with large diameters • Standard with rapid traverse in both longitudinal and cross directions to reduce non-productive times Lasdsxl Tcyjpfx Ai Rjg • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is cast in one piece, extremely torsion-resistant and vibration-damping, ensuring the necessary prerequisites for precise turning • Tailstock can be offset for taper turning • Central lubrication of the carriage Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Follow rest – max. workpiece diameter 120 mm • Foot pedal with brake function according to CE • Safety guard for quick-change tool post • LED machine light • Initial filling with Shell Tellus 46 • Face plate 450 mm • 2 live centres • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Lodpexl Ta Sjfx Ai Roag Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: new, Bernardo Goliath 500 x 1500 Production Lathe Technical Specifications Centre distance: 1500 mm Centre height: 250 mm Swing diameter over bed: 500 mm Swing diameter over gap*: 720 mm Swing diameter over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (24 steps): 9 – 1600 rpm Longitudinal feed range (80 steps): 0.063 – 6.43 mm/rev Cross feed range (80 steps): 0.027 – 2.73 mm/rev Metric threads (46): 1 – 224 mm Inch threads (44): 1/8 – 28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L x W x H): 3020 x 1240 x 1550 mm Weight approx.: 3285 kg * Removable gap bed section length: 200 mm Features Laodjxl D Akepfx Ai Rsg • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • One-piece cast machine bed ensures maximum rigidity and minimal vibration, providing the essential prerequisite for precise turning • Modern precision angular contact ball bearing spindle bearings • Central, user-friendly feed and thread control, with lead and feed shafts • Rapid traverse in longitudinal and cross directions as standard to reduce idle time • Large-dimension, hardened and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with fine graduation (0.02 mm) • Electromechanical foot brake to minimise non-productive time • Excellent cutting performance, even during facing operations Scope of delivery • Slip clutch • Rapid traverse longitudinal and cross • LED machine lamp • 3-axis digital readout ES-12V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 400 mm • Fixed steady rest – max. through diameter 200 mm • Follow rest – max. through diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake as per CE standards • Foot pedal with brake function as per CE • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Reducing sleeve • Chip guard (rear) • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Laodoxl Dwuopfx Ai Reg Technical Specifications - Distance between centers: 1500 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mount: DIN 55029, D1–6 - Speed range (16 steps): 45 – 1,800 rpm - Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev - Cross feed range (17 steps): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 3.0 / 4.5 kW - Machine dimensions (L x W x H): 2570 x 900 x 1600 mm - Weight approx.: 1,400 kg Product Features • Prism bed made of grey cast iron, induction hardened and precision ground • Electromechanical foot brake for reduced auxiliary times • Central, user-friendly control for feeds and threading with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including feed gearbox • Simple, smooth, and precise adjustment of speed and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity 135 mm • Traveling steady rest – max. capacity 65 mm • Coolant device • Four-way tool post • Safety guard for tool post • Micrometer longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread indicator dial • Motor with electromagnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 dead centers • Chip guard • Service tools

Condition: new, Bernardo universal lathe Solid 460 x 1500 Pro Vario Ljdpfx Aionfu Ams Roag Technical specifications center width: 1500 mm center height: 230 mm Swing diameter over bed: 460 mm Swing diameter over cranking: 690 mm Swing diameter over cross slide: 274 mm bed width: 300 mm spindle bore: 80 mm spindle mounting: DIN 55029, D1 - 8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm range of longitudinal feeds: (42) 0,031 - 1,7 mm/rev Range face feeds: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm inch threads: (60) 2 - 112 Gg/1" Quill diameter: 60 mm quill travel: 130 mm quill mount: MK 4 Motor power: 5,5 kW (7,5 PS) Machine dimensions: (W x D x H) 2750 x 1080 x 1370 mm weight approx. 2050 kg Scope of delivery 3-axis digital display ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - passage diam. max. 150 mm Moving steady rest - passage diam. max. 110 mm Initial filling with Shell Tellus 46 Clamping disc 450 mm Quick-change toolholder with 4 inserts Safety device for quick-change toolholder Foot pedal with brake function according to CE Coolant device Frequency converter Slipping clutch Change gears Reducing sleeve 2 centering points Threaded clock LED machine light Chip rear wall Operating tool Rapid traverse longitudinal and plane

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 45 + 90 m/min saw band length 4290 x 34 x 1.1 mm work height max. 866 mm Lsdsz D Iufjpfx Ai Rjag voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 606 kg range L-W-H 2340 x 1430 x 1460 mm The MBS 600 DG is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: - Band saw guide via a combined roller-and-jaw guide system * with carbide inserts - Swiveling saw frame for double miter cuts * to the left (-45°) and right (60°) - 2 band saw speeds (45 / 90 m/min) for optimal cutting results - Robust construction, ensuring smooth and vibration-free operation - Professional band saw offering excellent value for the price - Optimal power transmission to the drive wheel via a hardened . and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the clamping . pressure of the saw arm - Sturdy gray cast iron vise with workpiece stop * Ideal for batch cutting - For cutting profiles, tubes, and solid materials made of iron . and non-ferrous materials Scope of Delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-stroke shut-off

Condition: new, cutting diameter 315 mm capacity 90 degrees: flat 400 x 250 mm capacity 90 degrees: square 270 x 270 mm capacity 45 degrees: flat RE 300 x 280 mm capacity 45 degrees: round RE 280 mm capacity 45 degrees: square RE 280 x 280 mm capacity 45 degrees: flat LI 280 x 200 mm capacity 45 degrees: round LI 250 mm capacity 45 degrees: square LI 220 x 220 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 140 x 140 mm turning speed range: 35 + 70 m/min saw band length 3460 x 34 x 1.1 mm work height max. 870 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 550 kg range L-W-H 2150 x 1400 x 1420 mm The MBS 400 DG model is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: - Professional band saws for general workshop use - for cutting hollow profiles and solid materials, stainless steel, ... - torsion-resistant, heavily dimensioned saw frame made of ductile iron - adjustable hydraulic cylinder for regulating the contact - pressure of the saw frame - Swiveling saw arm for double miter cuts * to the left (-45°) and right (60°) - Smooth, low-vibration operation thanks to the use of high-quality materials Laedpfx Aiez D It Uo Rjg - Sturdy vise made of gray cast iron with quick-release lock - Band saw guide with quick adjustment * to accommodate the workpiece width, ensuring optimal results - Automatic shut-off upon completion of the cut Scope of Delivery - Band saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-cut shut-off

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 20 - 80 m/min saw band length 4290 x 34 x 1.1 mm work height max. 865 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 686 kg range L-W-H 2340 x 1430 x 1550 mm The MBS 600 DGA-V model is a semi-automatic double-miter band saw for miter cuts up to 60°. The infinitely variable cutting speed and the hydraulic vise make for comfortable operation. Thanks to its solid construction, Lodjz D It Iopfx Ai Roag this model guarantees precise cuts when cutting hollow profiles, solid materials, stainless steel, tool steel, etc. This machine is used in metalworking shops, repair shops, mold and tool making, ... Features: - continuously variable cutting speed * for optimal adjustment to the workpiece (20â??80 m/min) - Increased cost-effectiveness thanks to semi-automatic operation - Choice of manual or semi-automatic sawing mode - Adjustable vise; clamping is manual or hydraulic - Swivel range of the saw frame (-45° to 60°) readable via a degree scale - Professional band saw offering good value for money - Smooth, vibration-free operation ensures high cutting accuracy - Optimal power transmission to the drive wheel * via a hardened and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the contact . pressure of the saw frame - Saw blade guidance via a combined roller-and-jaw guidance system * with carbide inserts Semi-automatic operation: - Hydraulic clamping of the vise - Hydraulic lowering of the saw frame - Lifting of the saw frame Scope of delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Hydraulic quick-clamping vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch

Condition: new, diameter of brush Ø 250 mm width of brush 80.0 mm turning speed range 1450 U/min bore Ø 24.0 mm Wire thickness 0.3 mm Dust suction hood 50.0 mm voltage 400 Volt engine output ca. 3.0 kW weight of the machine ca. 90.0 kg range L-W-H 820 x 450 x 1140 mm The BES 250 D brush deburring grinder is ideal for deburring the inner and outer edges of profiles and flat materials. Thanks to its powerful drive motor and robust construction, this machine is ideally suited for professional use in workshops. Product Features - Ball-bearing-mounted rotor ensures smooth operation and a long service life - Ideal for deburring cut edges, removing rust from metal surfaces, . and removing paint coatings,... - Comes standard with a 50 mm diameter suction port for connecting to a . dust extraction system Laodpfez D Itzsx Ai Rsg - Powerful and low-noise drive motor - Low-vibration operation thanks to a sturdy, torsion-resistant machine housing - Heavy-duty construction and high-quality components * Ideal for commercial and industrial use Scope of Delivery - Round wire brushes - Adjustable workpiece support - Base frame

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Lodpfx Aoxab Elji Rjag Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm Laedpfxexabiqj Ai Rsg throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Condition: new, 6,5 mm ST 40 3,5 mm VA 90° Grad blade length 250 x 250 mm table: 810 x 750 mm work height max. 950 mm engine output 4,0 Ledpsxcux Dofx Ai Rsag weight 630 kg range L-W-H 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop