Used Bernardo Ebs 128 C 400V for sale (221)

Condition: new, input voltage: 400 V, control type: manual, overall weight: 85 kg, Equipment: CE marking, Simple, ergonomic, and economical metal band saw EBS 128 CL by BERNARDO. Angle cutting is possible from -60° to +45°, adjustable via the saw arm. Cutting capacity at 90° up to 125 mm (flat piece 150x100 mm). The main advantage of this saw, besides setting the cutting angle with the saw arm instead of repositioning the material, is the integrated cooling system as standard. This makes the EBS 128 CL an ideal choice for semi-professional craftsmen – combining performance, ergonomics, and ease of use. Key features: • Mitre cuts possible within the range of (+45° to -60°) • Stepless adjustment of the saw arm with a hydraulic cylinder • Automatic end-of-cut shut-off – limit switch • Robust, torsion-resistant saw arm • Three cutting speeds adjustable by V-belt drive • Sturdy machine frame guarantees precise, quiet, and vibration-free operation • Supplied as standard with quick-action vice and workpiece stop • Standard integrated coolant system • Equipped to the latest safety standards with a separate emergency stop button (CE compliant) Hnjdpfx Aceyr Nq Ushsp Technical Specifications: Cutting capacity round 90° 125 mm Cutting capacity flat 90° 100 x 150 mm Cutting capacity round 45° R 95 mm Cutting capacity flat 45° R 95 x 76 mm Cutting capacity round 60° 50 mm Cutting capacity flat 60° 50 x 56 mm Working height 740 mm Band saw blade dimensions 1638 x 13 x 0.65 mm Blade width 13 mm Cutting speed 23 / 35 / 55 m/min Motor power 0.75 kW Continuous rating S1 100% 0.55 kW Voltage 400 V Dimensions (W x D x H) 980 x 550 x 1100 mm Weight approx. 85 kg Scope of Delivery: • Band saw • Quick-action vice • Workpiece stop • Automatic end switch • Mobile machine base • Hydraulic cylinder • Cooling system • Separate emergency stop button (CE compliant)

Condition: new, capacity 90 degrees: round 100 mm capacity 45 degrees: round 65,0 mm Hodjxaa Apopfx Achenp capacity 90 degrees: flat 100 x 150 mm capacity 45 degrees: flat 60 x 100 mm dimensions of saw-band 1470 x 13,0 x 0,65 mm volt 230 V 45,0 m/min weight 26,0 kg range L-W-H 700 x 320 x 420 mm scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm Hjdpfopag Tdox Achonp suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table Hedpfxspag Tts Achonp - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, Bernardo Universal Lathe Compact 400 V Technical Specifications Center distance 850 mm Center height 200 mm Swinging diameter over bed 400 mm Swinging diameter over cross slide 245 mm Bed width 260 mm Spindle bore 52 mm Spindle mount DIN 55029, D1-5 Speed range, 2 steps 50 - 450 / 450 - 2500 rpm Range of longitudinal feeds (20) 0.025 - 2 mm/rev Range of cross feeds (20) 0.012 - 1 mm/rev Metric threads (26) 0.2 - 14 mm Inch threads (42) 1 - 80 TPI Tailstock diameter 50 mm Tailstock travel 120 mm Tailstock mount MK 3 Motor power 5.5 kW (7.5 hp) Machine dimensions (W x D x H) 1900 x 1000 x 1610 mm Weight approx. 1185 kg Features Standard equipped with a Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load Infinitely variable speed control; the set speed is displayed on a digital display To minimize the effects of vibrations, the massive prism bed is additionally equipped with ribs Versatile applications in general mechanical engineering, production, and the manufacture of individual parts Modern main spindle bearing with angular ball bearings in a precision design The machine bed, cast in one piece, is extremely torsion-resistant and has low vibration, thus fulfilling an essential prerequisite for precise turning Space-saving installation possible thanks to a chip tray that can be pulled out to the front Standard equipped with a 52 mm spindle bore for machining large shaft diameters Scope of supply • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck PO3-200 mm / D5 • Faceplate 320 mm • Fixed steady rest - bore diam. max. 130 mm • Traveling steady rest - bore diam. max. 100 mm • Coolant system • Quick-change tool holder with 4 inserts • Safety device for quick-change tool holder Hnedpfxsd Ertrj Achjp • Micrometer length stop • Friction clutch • Motor with magnetic brake according to CE standard • Initial filling with Shell Tellus 46 • Frequency inverter • Digital speed display • Pull-out chip tray • LED machine light • Change gears • Reduction sleeve • 2 centers • Chip guard • Operating tools

Condition: new, Bernardo Panel Saw Classic 3200 C The Classic 3200 C panel saw with tilting saw blade meets all the requirements of modern workshops and is the ideal machine for cost-conscious small and medium-sized enterprises. Both the robust design and the generous dimensions of the machine ensure optimal working conditions for cutting solid timber or large panels; even decorative panels can be processed effortlessly using the standard scorer unit. Features • Aluminum sliding table with hardened guide rails • Standard table extension and table widening for handling larger panels • Stable outrigger table allows processing of large and heavy sheets without additional assistance • Powerful drive motor ensures optimal cutting performance even during extended operations • User-friendly degree scale directly readable from the handwheel • Scoring unit with independent drive included as standard • Extendable telescopic fence (up to 3100 mm), mountable on the outrigger table front and back • Rigid saw unit guarantees vibration-free and precise operation • Machine body constructed from torsion-resistant steel and cast iron combination • Hinged rip fence with robust 40 mm round bar guide Technical Specifications Table size: 935 x 620 mm Sliding table: 3200 x 370 mm Crosscut length: 3200 mm Max. saw blade diameter: 315 x 30 mm Max. cutting height 90° / 45°: 90 / 65 mm Cutting width at rip fence: 1295 mm Table height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Outrigger table with roller: 1210 x 860 mm Hedpfx Aceywxrgehonp Main saw blade speed: 4000 / 6000 rpm Scoring saw blade speed: 8000 rpm Scoring saw blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 4.0 kW (5.5 HP) Motor input S6 40%: 5.5 kW (7.5 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3445 x 3560 x 1570 mm Weight: approx. 710 kg Scope of Delivery • Saw blade guard with infeed roller • Mitre fence • Crosscut shoe • Table widening • Extendable telescopic fence • Longitudinal fence stops • Outrigger table with roller • Push stick • Scoring unit with independent motor • Operating tools

Condition: new, Bernardo Edge Sander KSM 3000 C with Veneer Sanding Attachment Technical Specifications Work table 960 x 350 mm Table height adjustment 210 mm Belt length 3000 mm Belt width 150 mm Sanding belt backing 1060 x 200 mm Sanding head swivels 90° - 45° Belt speed 20 m/s Additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0.25 kW (0.34 hp) Dust extraction connection Ø 120 mm Motor output S1 100% 3.0 kW (4.0 hp) Motor input S6 40% 4.5 kW (6.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding attachment Additional table Graphite coating Miter fence Sanding platen Dust extraction hose Features • Heavy-duty machine stand in a torsion-resistant and vibration-free design, extremely stable • Serrated infeed fence, ideal for sanding veneer overhangs • Double-sided dust extraction connection 80 / 100 mm for optimal chip extraction • Oscillating sanding belt ensures high material removal and a clean sanding finish • Maintenance-free sanding belt oscillation with separate gear motor, can be switched on as desired • Height-adjustable sanding table for utilizing the entire sanding belt • Standard veneer edge sanding attachment with fine adjustment Hnodpfx Aed N Tdmschsp • Quick changeover from veneer to solid wood sanding possible • Height adjustment of the work table or swiveling of the sanding head is done via handwheels • Spring-loaded belt tension, resulting in automatic compensation for belt length differences • Height-adjustable additional table with dust extraction for sanding radii

Condition: new, functionality: fully functional, input voltage: 400 V, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, rotational speed (max.): 6,000 rpm, overall weight: 710 kg, Equipment: CE marking, saw blade guard, Rod guideways – a solution previously found only in top-tier machines, now available as standard Slide table made of aluminum equipped with hardened guideways ensures smooth and precise movement Hnodpfxsyt I Are Achsp Table extension and widening as standard – ideal for supporting large sheet formats Robust support table enables processing of heavy and large panels without the need for additional support Powerful drive motor guarantees maximum cutting performance, even during intensive continuous operation Easy angle reading set directly on the handwheel – comfort and precision in adjustment Scoring unit with independent motor included as standard Extendable telescopic stop (up to 3100 mm), mountable at the front or rear of the support table – flexibility and convenient handling Stable saw unit ensures precise, clean cuts without vibration Machine body with reinforced, stable design made of steel and grey cast iron combination – ensures durability, rigidity, and precise operation even under heavy load. Parallel fence with a robust, round 40 mm guideway – the tilting option makes material loading easier Workspace – minimum required floor area is 5 × 6 m Technical specifications Table size – length: 935 mm Table size – width: 620 mm Sliding table length – panel/roller: 3200 mm Sliding table width – panel/roller: 370 mm Sliding table, carriage type: Panel Edge trimming length / table movement: 3200 mm Blade size: 315 x 30 mm Max. cutting height 90°: 90 mm Max. cutting height 45°: 65 mm Cutting width with guide: 1295 mm Working height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Extension table: 1210 x 860 mm Main saw rotation speed: 4000 / 6000 rpm Scoring saw rotation speed: 8000 rpm Scoring saw size: 120 x 20 mm Extraction port Ø: 100 mm Motor power: 5.5 kW Motor power S1 100%: 4 kW Scoring unit motor power: 0.75 kW Voltage: 400 V Dimensions – width: 3445 mm Dimensions – depth: 3560 mm Dimensions – height: 1570 mm Weight approx.: 710 kg

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Hnsdpfxoziww Ns Achsp Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: new, Year of construction: 2022, Band width: 150mm Band length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Swiveling sanding unit: yes Table size: 750mm x 290mm Dust extraction port: 120mm Hodpfx Acjiuld Dehonp Motor power: 3kW Machine length: 1700mm Machine width: 700mm Weight: 180kg

Condition: new, Year of construction: 2022, Belt width: 150 mm Belt length: 2740 mm Veneer sanding attachment: no Oscillation: yes Roller diameter: 115 mm Sanding unit swivels: yes / 90° - 0° Work table: 900 x 305 mm Auxiliary table: 290 x 260 mm Belt speed: 16 m/s Dust extraction connection: 100 mm Hodpfohq A H Dex Achenp Motor power: 3 kW / 400V Machine length: 1540 mm Machine width: 750 mm Weight: 220 kg

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension Hjdpozibdtjfx Achonp • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension Hnedpozibc Ajfx Achop • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo Dual-Column Bandsaw MBS 400 DG / 400 V Technical Specifications Cutting capacity, round / square 90°: 315 mm / 270 x 270 mm Hnodszibbxjpfx Achop Cutting capacity, flat 90°: 400 x 250 mm Cutting capacity, round / square 45° (right): 280 mm / 280 x 280 mm Cutting capacity, flat 45° (right): 300 x 280 mm Cutting capacity, round / square 45° (left): 250 mm / 220 x 220 mm Cutting capacity, flat 45° (left): 280 x 200 mm Cutting capacity, round / square 60° (right): 180 mm / 140 x 140 mm Working height: 870 mm Saw band dimensions: 3460 x 34 x 1.1 mm Cutting speeds: 35/70 m/min Coolant pump: 100 W Motor output (S1 100%): 2.2 kW Motor input (S6 40%): 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2150 x 1400 x 1420 mm Weight: approx. 550 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end stop

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw Hnedpfoza Hidsx Achep • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Hnjdoqzhxiopfx Achop Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 360 mm bore stroke 225 mm morse taper 4 MK table: 570 x 480 mm threading M 42 Stahl Hjdpfxexacc So Achjnp turning speeds 50-316 / 316-2200 U/min feed 0.08 - 0.50 mm/U column diameter 180 mm distance spindle /table max. 580 mm distance spindle/base plate max. 1185 mm total power requirement 3.0 kW weight 630 kg range L-W-H 1020 x 750 x 2340 mm Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - Motorized table stroke - Coolant device - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial filling with Shell Tellus 46 - LED machine light - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery Hnodpexaaqgsfx Achep - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. Hnodjxak H Sepfx Achjp dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides Hnsdpfxexaa Ais Achep - workpiece support

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 Hodpfx Acoxaa Thjhonp - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Hnodexaadyepfx Achjp Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: new, turning length 850 mm turning diameter 400 mm swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light Hsdpfexaaxwex Achonp - Change gears - Reduction sleeve - 2 centering points - Chip rear wall - Operating tool

Condition: new, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds, 400 V: 45 / 90 m/min Coolant pump, S1 100%: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 190 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for belt tension • Vise with quick-release mechanism • Coolant system Hjdpfx Asd Du T Iochjnp • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo Universal Milling Machine UWF 80 E incl. 3-axis digital display and y-axis feed Technical Specifications Table size 1000 x 240 mm Spindle taper ISO 40 Spindle speed vertical (8) 115 - 1750 rpm Spindle speed horizontal (9) 60 - 1350 rpm Quill travel 125 mm Travel along longitudinal axis (x) 590 mm Travel along transverse axis (y) 180 mm Travel along vertical axis (z) 320 mm Distance spindle / table 0 - 375 mm Overhang 230 - 685 mm Table swivel range -45° to +45° Spindle head swivel range -90° to +90° Feed range, longitudinal (8) 32 - 700 mm/min T-slot size 16 mm Motor power vertical 0.85 / 1.5 kW Motor power horizontal 1.5 kW Machine dimensions (W x D x H) 1500 x 1430 x 2100 mm Weight approx. 980 kg Scope of delivery • 3-axis digital display ES-12 H with LCD display • Draw-in spindle M 16 • LED machine light • Coolant system • Automatic milling table feed for x-axis • Automatic milling table feed for y-axis Hnjdsd Erttjpfx Achop • Adapter ISO 40/MK 3 • Adapter ISO 40/MK 2 • Adapter ISO 40/B 18 • Long milling arbor ISO40/27 mm • Adjustable safety device • Protective cover for horizontal milling • Horizontal support bearing