Strung

WMW Zerbst DP 2000

Condition: excellent (used), Herringbone Gear Generator MDV 2000 MDV 2000 Characteristics: Max wheel diameter: 2000 mm Redpfefx Ibnjx Abbjt Min wheel diameter: 50 mm Max module: 12 Min module: 3

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Rsdpsfbbx Rsfx Abbot Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° Rsdpfx Ajvibc Hjbbot turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically Rjdpfxelpadyj Abbot very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Redsrtrzdepfx Abbet Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück Rodpfx Aoxz Avbobbot This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. *

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Rsdertrykspfx Abbst Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: not inspected (used), Forst RF 16 internal broaching machine -WKG 1371- Technical data: Rjdpfehu E N Dox Abbst Manufacturer: Forst Type: RF 16 Max. Tractive force: 16t Max. Stroke: 1200mm Max. Cutting speed: 5,6m/min Max. Workpiece diameter: Ø 700mm Max. Tool diameter: Ø 120mm Workpiece seat: Ø 70mm Note: control valve missing

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) Rsdehq Uklopfx Abbet 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR