Used Circular table saws for sale (68)

Call

Condition: excellent (used), Year of construction: 1983, Pull saw Mafell Erika year of construction 1983 Bh9gaonjufu 1,1 kw, 220 Volt Ø 280 saw blade

more

Listing

Rietberg

7,715 km

Fixed price VAT not applicable

WEINIG

€1,000

Call

Condition: ready for operation (used), The machine is in operation. Bacubmy0jk

more

Listing

Sierakowska Huta

8,052 km

Circular Saw

Condition: excellent (used), CATALOG NO. 7137 TECHNICAL DATA - maximum saw diameter 400mm - disc hole diameter 30mm - spindle locked - max cutting height 100mm - main dial adjustable up/down - shield cover - with sidecar - cutting length on the trolley 750mm Bexuizzpuiu - cutting width with the guide 1000mm - main engine 4kW - tabletop dimensions 950x735mm - diameter of the exhaust pipe 150mm - dimensions length/width/height 1380x2110x950mm - weight 602 kg ADVANTAGES – German production – with sidecar – used saw, very good condition Net price: PLN 6500 Net price: EUR 1461 depending on the price of EUR 4.45 (Prices may vary with higher fluctuations)

more

Listing

Gerolzhofen

7,947 km

sliding table saw

Holzstar FKS 315-2000 E

€2,899

TD-500 RP twin-shaft circular sawmill

Call

Condition: new, -NEW- - Standard with scoring device - Swiveling from -45° to 45°, telescopic fence with finely adjustable fence flap - Robust and precise design with sliding carriage - The cast iron work table allows low-vibration work - Saw blade height adjustment via hand wheel - Saw blade tilt adjustable from 90 to 45° via hand wheel with scale - Stable saw unit guarantees vibration-free and precise working - Solid cantilever table with roller and telescopic arm for maximum stability - Miter fence and hold-down over the entire carriage length movable - Large aluminum parallel fence on round rod guide with fine adjustment - Powerful drive motor for constant cutting speed, even at 100 mm cutting height - Large dimensioned working table and standard table extension for cutting widths up to 1220 m Technical data: length approx. 4330 mm Width/Depth approx. 4155 mm Height approx. 1150 mm Weight approx. 275 kg Suction port diameter 100 mm Suction port diameter saw blade guard 38 mm Input power 3.5 kW Supply voltage 400 V Mains frequency 50 Hz Cutting width with rip fence 1220 mm Trimming length 2000 mm 2iqd0 Saw blade inclination 90 - 45 ° Max. Cutting height 90° 100 mm Max. Cutting height 45° 80 mm Diameter saw blade 315 mm Speed saw blade 4000 min¯¹ Table length 680 mm Table width 580 mm Table height 870 mm Diameter saw blade scoring unit 90 mm Speed saw blade scoring unit 5800 min¯ Scope of delivery: - sliding table with extension arm - material roll at extension arm - rip fence with round bar guide and fine adjustment - table extension - table widening - folding fence - trimming shoe - eccentric clamp - scoring unit - saw blade protection hood with suction hose storage location 97447 Gerolzhofen -free loaded-

more

Listing

Karsin

8,083 km

Walter TD500RP

€7,800

Call

Condition: good (used), Functionality: fully functional, Minimum log length - 1200 mm Uwqishtfu Maximum diameter of the log - 450 mm Diameter of the saw blade - max 500 mm . Maximum number of saws up to 4 on each shaft

more

Listing

Maisach

8,114 km

Multi blade saw

John ABMI

€2,800

Call

Condition: used, John multi-blade saw Power: 22 KW Cutting width adjustment Ready for use Czfqkj8g

more

Listing

Lambsborn

7,809 km

Rapid PK100

€980

Call

Condition: excellent (used), Circular table saw PK 100 Cutting width to the right of the blade 850 mm Cyysm3zr saw blade 45° tiltable Saw blade diameter 200 mm Approx. 200 kg Suction duct connection bottom left

more

Listing

Erzgebirgskreis, Deutschland

8,053 km

Kity 619

€750

ONO plus VAT

Call

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Circular table saw with side-folding table with table extension Cutting width at rip fence 900 mm Motor power 1.5 kW Cutting height max. 85 mm, with saw blade diameter 250 mm Biiumzsfymp The machine is function-tested and cleaned before sale.

more

Listing

Sierakowska Huta

8,052 km

Circular Saw

VEB TK2

€1,169

Call

Condition: excellent (used), CATALOG NO. 7136 TECHNICAL DATA - maximum saw diameter 400mm - disc hole diameter 30mm - shield cover - max cutting height 100mm - main dial adjustable up/down - cutting width at the guide 400mm - angle-adjustable guide - main engine 3kW - tabletop dimensions 800x1000mm - brake - dimensions length/width/height 930x1130x1000mm - weight 425kg Bext28qzbuk ADVANTAGES – German production - brake – guide adjustable at an angle – used saw, very good condition Net price: PLN 5200 Net price: EUR 1169 depending on the price of EUR 4.45 (Prices may vary with higher fluctuations)

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

7,593 km

circular table saw

Magic

€1,800

Call

Condition: good (used), Saw Magic Bgolib7kprt Type:Bench circel saw Techn info: Work table 1000x900mm Saw blade max 400mm Cuting hight max 130mm Saw blade tiltable 90-45 degrees Cutting width 440mm Motor 7,5 Hp Power 400 volt, 50 Hz, 3 phase Dust nozzle 120mm Weight 450Kg Lager no:2001176BXM

more

Listing

Gerolzhofen

7,947 km

Circular sawing machines

Holzstar Typ FKS 255-1300 400 V

€1,639

PAUL 27 A0 hydraulic crosscut saw

Call

Condition: new, new- - Heavy cast iron work table for low vibration work and precise, straight cuts - Saw unit can be tilted up to 45 degrees, adjustment via handwheel - cutting plane directly on the saw blade - table arm with extendable telescopic fence and folding fence for panels and large workpieces - telescopic fence can be swivelled on both sides by 45 degrees - aluminum-rip fence on round bar guide with fine adjustment - Standard table widening and extension allow easy working with larger workpieces 7zz29ts2o - Large central suction port with 100 mm diameter Technical data: dimensions and weights length approx. 1320 mm width/depth approx. 1750 mm height approx. 1120 mm weight approx. 155 kg Connection suction Suction port diameter 100 mm Suction port diameter saw blade protection 30 mm Electrical data Input power 2,0 kW Total connected load 3,5 A Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Noise emission Sound pressure level 83,7 dB(A) Circular saw unit Cutting width with rip fence 610 mm Max. Cutting width left of saw blade 845 mm Trimming length 1250 mm Saw blade tilt 90 - 45 ° Max. Cutting height 90° 80 mm Max. Cutting height 45° 54 mm Diameter saw blade 254 mm Speed saw blade 4000 min¯¹[ Sliding carriage and table Trimming frame length 600 mm Trimming frame width 460 mm Format sliding carriage length 1320 mm Format sliding carriage width 238 mm Table length 790 mm Table width 350 mm Table height 835 mm Scope of delivery - trimming shoe - eccentric clamp - angle stop -45° to 45° - circular saw blade 254 x 30 x 3,0 mm Z40  

more

Listing

Arad

8,837 km

Paul 27 A0

€7,300

Call

Condition: ready for operation (used), Year of construction: 1995, zday good, We offer for sale a hydraulic crosscut saw manufactured by PAUL model 237 A0 equipped with two roller tables. To begin with, some useful information about the machine: D7sab7w * 7.5 kW motor * two infeed and outfeed tables included. * left table 4.1 m * right table 3,5 m * blade fi 800 mm * max cutting height 250 mm * maximum cutting width 700 mm * 1995 year of production

more

Listing

Lambsborn

7,809 km

Rapid PK100

€980

Call

Condition: excellent (used), Circular table saw PK 100 Cutting width to the right of the blade 850 mm saw blade 45° tiltable Saw blade diameter 200 mm D7svq8c approx. 200 kg

more

Listing

Délegyháza

8,629 km

grinding machine

Walter Walter 40NC

€1,000

Call

Condition: good (used), Year of construction: 1990, Originated walter grinding machine Ba3npivr

more

Listing

Sierakowska Huta

8,052 km

Crawler multisaw

TOS SVITAVY PKSN 32A 350/120

€11,089

Call

Condition: excellent (used), CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track Sfuwt - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 49900 Net price: 11089EUR Net price calculated according to the exchange rate of 4.5 PLN/EUR (with larger exchange rate fluctuations, the price may change)

more

Listing

Krauchenwies

8,004 km

Record Power TS2

Record Power TS 2

€3,248

Call

Condition: new, Year of construction: 2022, Record Power TS 2 Machine details: Main motor: 4kW voltage: 3x 400 V / 50 Hz maximum saw blade diameter: 315mm spindle diameter: 30mm speed: 4000 rpm max. cutting height with 315mm at 90deg: 95mm max. cutting height with 315mm at 45degrees: 67mm Pivotable: 0-45 degrees cutting width: 900mm Motor scoring: 0,75kW Diameter scoring: 120mm Speed scoring: 8000 rpm spindle diameter spindle: 20mm Jxsxtm carriage length: 1200mm cutting length: 1300mm carriage width: 310mm roller carriage adjustable in 50mm raster dimensions of casting table: 800x530mm diameter of suction nozzle: 250+55mm weight: approx. 400Kg Demonstration machine like new A swiveling top guard is available for an extra charge of 1249€.

more

Listing

Gerolzhofen

7,947 km

table circular saw

Holzstar Typ TKS 200/230 V

€789

Call

Condition: new, - NEW - DIY machine with maximum cutting depth 60 mm Top price-performance - Large machine table made of steel, galvanized as standard against corrosion - Table extension standard - Saw blade pivoting from 90 ° to -45 ° to the left, precise, precise to the degree and comfortably adjustable via Handwheel and scale - Height adjustment of the saw blade via handwheel - Stable suspension of the saw unit at the front and Rear allows precise cuts Fl0bcl7ik - Powerful motor with thermal Overload protection equipped - Large central suction connection Ø 100 mm - Saw blade guard with suction connection Delivery: - substructure - sliding table - Rip fence - Angle stop - Saw blade guard with suction hose - Table broadening - Saw blade 200 x 30 x 2.8 mm Z18 Technical specifications: Cutting width with rip fence 705 mm Max. Cutting width to the left of the saw blade 635 mm Saw blade tilt 45 - 90 degrees Max. Cutting height 90 ° 60 mm Max. Cutting height 45 ° 48 mm Diameter (main) saw blade 200 mm Speed (main) saw blade 4750 min-1 Sliding carriage length 400 mm Format slide carriage width 250 mm Table length 530 mm Table width 400 mm Table height 870 mm Power drive motor 0.75 kW Recording power 1.1 kW Diameter exhaust below 100 mm Diameter exhaust top 30 mm Supply voltage 230V Phase (s) 1 Ph Current type AC Mains frequency 50 Hz Total connected load 4.6 A Total power 1.1 kW Length 1430 mm Width / depth 1000 mm Height 1030 mm Weight (net) 80 kg Art. No. 5902020 Storage location 97447 Gerolzhofen

more

Listing

Verlhac-Tescou

7,766 km

Retractable blade saw

€1,500

Call

Condition: excellent (used), Circular sawing machine with retractable blade by pneumatic cylinder. Blade diameter 400 mm Wood passage dimension : 240 x 140 mm 400 volts three-phase Cukfb9lxqq Can be automated with stop or optical cell

more

Listing

Lambsborn

7,809 km

Ulmia 1612 SP

€1,100

Table saw with sliding carriage

Call

Condition: excellent (used), Year of construction: 1980, Circular table saw Type 1612SP Year of manufacture 1980 weight 344 kg underfloor traction circular saw 2,2 kw miter fence 45 Co0wlvkq Support widening right and left With attached suction

more

Listing

Bitburg

7,719 km

Scheppach TS 2500

€1,750

Call

Condition: excellent (used), Year of construction: 1996, Scheppach circular table saw with sliding carriage Jy3awm YEAR 1996 blade diameter: min.: 200 mm / max. 250 mm bore diameter: 30 mm motor power: 3,6 KW (P1) rip fence 1100 mm Sliding table with length stop extendable up to 1500 mm And miter adjustment sliding table: 1400 mm Table extension Location: Ex stock 54634 Bitburg - immediately available -

more

Listing

Sierakowska Huta

8,052 km

Format saw

REMA FX500 – 2osie

€12,775

Call

Condition: new, CATALOG NUMBER RE031 - new machine - CE certificate - professional - Polish production - 6kW main engine TECHNICAL DATA - max diameter of the main saw 300-450mm Vertical adjustment of the main saw: - for a saw ⌀300 0-75mm - for a saw ⌀350 0-100mm - for a saw ⌀400 20-125mm - for a saw ⌀450 45-150mm - for a saw ⌀500 (option) 90-175mm The height of the main saw adjustment at an angle of 45 °: - for a saw ⌀300 0-50mm - for a saw ⌀350 0-70mm - for a saw ⌀400 12-85mm - for a saw ⌀450 30-105mm - for a saw ⌀500 (option) 63-122mm - Saw blade tilt 0-45 ° / (optional) 0-46 ° - Length of sawing with an auxiliary table - with a strip at the back of the table for a movable table 300 = 3000mm Cutting width at the guide: - Bumper 50-1750mm - Extension (from - to) 1965-3200mm - Bumper with digital readout 50-1630mm - Max. distance of the longitudinal guide from the saw 1400mm - Main engine power 6kW (option 7.5kW) - Power of the undercutting spindle motor 0.75kW - Diameter of the circular saw undercutting spindle 120-130mm - Rotational speed of the undercutting spindle 8500 rpm - Diameter of the main spindle tip 30mm - Diameter of the cutting spindle tip 20mm - Main spindle speed 3500/4500/6000 rpm - Dimensions of the movable table table 300: 416x3010mm - Locking the movable table - Dimensions of the fixed table: 705x1500mm - Working height of the table 890mm Overall dimensions of the saw: - length for the table 300: 3500mm - width 3900 + extension (total 5000mm) - maximum height 1950mm - The outer diameter of the sawdust extraction - top cover 80mm - The outer diameter of the sawdust extraction - lower suction cup 125mm - Lower suction air consumption 900 m3 / h - Top cover air consumption 360 m3 / h - Air speed in the suction nozzles 28m / s - Weight 1250 kg The price is for the model - Fx500 2 axes - electric control for lifting and tilting the main saw. With electronic reading for height and angle. A desktop in the body of the machine. Optional accessories: - angular ruler - with an aluminum strip - additional support table - additional start / stop on the sliding table - electronic reader of the cutting width on the rip fence - electronic reader of the cutting width on the auxiliary table - 3200mm, 3900mm, 2500mm sliding table Net price: PLN 56850 Net price: EUR 12775 Net price, calculated at the rate of 4.45 PLN / EUR (with larger exchange rate fluctuations, the price may change) Bp27fsuhhy - we send machines to every corner of the country - the possibility of leaving another machine in the settlement. The given prices are net prices. Net price given for international transactions, EU customers with EU NIP. Please confirm availability and current price before placing an order for a new product.

more

Listing

Szendehely

8,587 km

Revolving cross cut saw

AVOLA gama 65 v

€16,000

Call

Condition: like new (used), Year of construction: 2006, Carpenter's circular saw in mint condition. Bbgqybdulaj Digital size marking on the ruler. can be tilted and rotated! The diameter of the circular saw blade is 650 mm.

more

Listing

Gerolzhofen

7,947 km

table circular saw

Holzstar Typ TKS 254 E/400 V

€999

Decoupling saw with table circular saw

Call

Condition: new, - NEW - - Large-sized steel machine table, standard galvanized against corrosion - Saw blade swiveling from 90 ° to -45 ° to the left, precise, accurate to the degree and convenient adjustable via handwheel and scale Coecx93lav - Large central suction connection Ø 100 mm - The saw blade height is also adjusted via a handwheel from the operator front - The stable suspension of the saw unit front and back enables precise cuts - With powerful motor and thermal Overload protection - Incl. Saw blade protection hood with integrated Suction connection - Exact saw blade swiveling from 90 ° to -45 ° to the left - High stability for precise cuts Technical specifications: Dimensions and weights Length approx. 1430 mm Width / depth approx. 1000 mm Height about 1030 mm Weight about 105 kg Suction connection Extraction nozzle diameter 100 mm Suction nozzle diameter saw blade protection 30 mm Electrical data Power drive motor 1.5 kW Power consumption 2.0 kW Total power 2.1 kW Total connected load 3.5 A. 400 V supply voltage Phase (s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound pressure level 84.7 dB (A) Circular saw unit Cutting width with rip fence 680 mm Max. Cutting width to the left of the saw blade 650 mm Saw blade inclination 45 - 90 ° Max. Cutting height 90 ° 80 mm Max. Cutting height 45 ° 58 mm Saw blade diameter 254 mm Saw blade speed 4000 rpm Sliding carriage and table Sliding table length 400 mm Sliding table width 250 mm Table length 635 mm Table width 420 mm Table height 850 mm Storage location 97447 Gerolzhofen

more

Listing

Karlholmsbruk

7,605 km

Circular Saws

Tegle & Soner

Call

Condition: used, Circular saw is in working condition, top frame is moving. Can saw in angle. Bt7zmw87nx

more

Listing

Hövelhof

7,729 km

Behrens CB 3121

€2,250

Call

Condition: good (used), Year of construction: 1975, A decoupling saw with a table circular saw from Behrens is offered here. Type: CB 3121 Built: 1975 Dimensions: 2010 x 1000 mm Motor speed of the decoupling saw: 600-1000 upm/rpm infinitely variable Cutting height: 40mm Extension: 1700 mm Cutting height of the table circular saw: 35mm Saw blade diameter: 250mm The circular saw is foldable and is equipped with a suction system. Bfjijxfu7i

more

Listing

Bad Sooden-Allendorf

7,837 km

Table saw / bench saw

ROJEK PK 315 A

Call

Condition: new, Year of construction: 2023, Engine power 4.4 kW Motor power of the separate scoring unit 0.75 kW Max. cutting height of the saw blade 315 90°/45°: 102/71 mm Saw blade tilting 90° - 45°. Dzuasflzkh Table size 400 x 955 mm Cutting width 800 mm Cutting length 1200 mm

more

Listing

Gerolzhofen

7,947 km

Holzstar FKS 255-1300 230 V

€1,639

Call

Condition: new, - NEW - DESCRIPTION Heavy work table made of gray cast iron for low-vibration work and precise, straight cuts Saw unit can be swiveled up to 45 degrees, adjustment via handwheel Cutting plane directly on the saw blade Table extension arm with extendable telescopic stop and two Folding stops for panels and large workpieces Telescopic stop can be swiveled 45 degrees on both sides Aluminum rip fence on round rod guide with fine adjustment Enabling standard table widening and extension easy work with larger workpieces Large central suction connection with a diameter of 100 mm TECHNICAL SPECIFICATIONS Dimensions and weights Length (product) approx. 1320 mm Height (product) approx. 1120 mm Width / depth (product) approx. 1750 mm Weight (net) approx. 155 kg Connection suction Extraction nozzle diameter 100 mm Suction nozzle diameter saw blade protection 30 mm Electrical data Connection voltage 230 V Output power 1.5 kW Mains frequency 50 Hz Total connected load 9.3 A. Input power 2.1 kW Motor speed 2800 rpm Pqy0f Sliding carriage and table Edging frame length 600 mm Table length 790 mm Trimming frame width 460 mm Table width 350 mm Format sliding carriage length 1320 mm Table height 835 mm Format sliding carriage width 238 mm Noise emission Sound pressure level 83.7 dB (A) Circular saw unit Cutting width with rip fence 610 mm Max. Cutting height 90 ° 80 mm Max. Cutting width to the left of the saw blade 845 mm Max. Cutting height 45 ° 54 mm Trimming length 1250 mm Saw blade diameter 254 mm Saw blade inclination 90 - 45 ° Saw blade speed 4000 rpm FURNISHING Handle for sliding carriage Table extension Rip fence with round bar guide Saw blade guard Table extension

more

Listing

Karlholmsbruk

7,605 km

Circular Saws

Adema

Call

Condition: used, Saw is in working condition. C3cee2f7

more

Listing

Gerolzhofen

7,947 km

Holzstar FKS315-1500 E

€2,299

Call

Condition: new, -new- Robust and precise design with format- sliding carriage - The cast iron work table allows low-vibration work - Swiveling from -45° to 45°, extendable telescopic fence - Saw blade swiveling from 0° to 45° adjustable via hand wheel with scale - Saw blade height adjustment is made via a hand wheel - Large central suction connection-D. 100 mm Rxk3j - Saw blade hood with integrated suction connection D. 38 mm Technical data: Max. saw blade dia. 315 mm Max.-Cutting height 90°/45° 100/75 mm Cutting width with fence 940 mm Saw blade inclination 0-45° Table dimensions 350 x 760 mm Trimming length 1370 mm Table extension 350 x 500 mm Speed 4250 min/1 Motor power 400 V / 50 Hz 3,0 kW Exhaust port dia. top 40 mm suction port dia. bottom 100 mm weight 194 kg scope of supply: - sliding table with extension arm - trimming shoe - rip fence with round bar guide and fine adjustment - saw blade protection hood with suction hose . 590 0315 place of storage 97447 Gerolzhofen -free loaded-

more

Listing

Karlholmsbruk

7,605 km

Circular Saws

Randek 5SM

Call

Condition: used, Cutting height: 700 mm O9nx9 The saw is in working condition.

more

Listing

Gerolzhofen

7,947 km

Sizing saw

Altendorf F45 Elmo CE

€10,500

Call

Condition: used, Year of construction: 2001, with CNC - stop used, top condition, top equipment Dloc02 make Altendorf type F45 Elmo CE year of construction 2001 Masch.-Nr. 01-06-193 GS-tested CE-type tested GS-wood dust tested engine 5,5 kW steel guides carriage length approx. 3000 mm cutting width approx. 1300 mm max. blade diameter 450 mm swivels up to 45° scoring unit electrically adjustable 2 axes control panel swivels on top rip fence with automatic control table top extension anodized aluminum parts height adjustment electrically swivel adjustment electrically positioning control 3 axes digital display: - height - cutting angle - rip fence - speed suction connection 120 / 80 mm space requirement approx. 3000 mm x 2300 mm x 1800 mm weight approx. 1100 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

more

Listing

Gerolzhofen

7,947 km

SCM / Holzkraft minimax SC 3 classic 23

€5,199

Call

Condition: new, - NEW- description Cutting plane directly on the saw blade Heavy steel and cast iron construction Precision-guided format sliding carriage made of aluminium, anodized as standard Large-area table extension guided on a telescopic arm and longitudinally adjustable Extendable aluminum telescopic fence, angle adjustable with professional stop flaps Rip fence with quick release and fine adjustment Large work table made of milled gray cast iron stays permanently flat The standard table extension and table extension enable easy work with larger workpieces Quiet running and precise cuts Equipped with a powerful three-phase motor The large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service life Maximum cutting height is also achieved with the built-in scoring device Equipment details: Double cradle saw unit Generously dimensioned, made of steel/cast iron Close to the saw blade, supported on both sides for precision, smooth running and a long service life Adjustable in height and up to 45° with a crank Maximum cutting height is also achieved with the built-in scoring device Also available with scoring unit telescopic stop Extendable telescopic stop up to max. 2550 mm Angle adjustable With professional stop flaps Aluminum sliding carriage With a thousand times proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10-year Holzkraft guarantee on wear and tear on the guideways Rip fence with round rod guide With fine adjustment and quick release Stable round rod guide made of ground steel with a diameter of 45 mm Can be folded down as standard for cutting large workpieces Technical specifications: Dimensions and weights Weight (net) approx. 380 kg Connection suction Suction connection diameter 120 mm Suction connection diameter saw blade protection 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Coeecasejc Space required length 5118 mm Space requirement width/depth 3830 mm electrical data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Nominal operating mode drive motor S6 Type of current AC Duty cycle drive motor 40% Mains frequency 50 Hz Sliding carriage and table Format slide length 2250 mm Table length 840 mm Format sliding carriage width 270 mm Table width 560 mm Format sliding carriage height 124 mm Table height 900 mm circular saw unit Cutting width with rip fence 900 mm Max. cutting height 90° 90 mm Max. cutting width to the left of the saw blade 2310 mm Max. cutting height 45° 63 mm trimming length 2250 mm Saw blade diameter 315 mm Saw blade inclination 90 - 45° Saw blade speed 4000 rpm Art. No. 5504323 Ausziehbarer Teleskop-fence to max. 2550 mm Winkeladjustable Mit Profi-Anschlagklappen Aluminium-sliding table Mit tausendfach bewährtem Kugelkontaktsystem Staub- and schmutzunempfindlich du

more

Listing

Gerolzhofen

7,947 km

SCM / Holzkraft sc 3 c 26

€5,459

Call

Condition: new, - New- - Cutting plane directly on the sliding carriage - Heavy steel and cast iron construction - Precision-guided format sliding carriage made of aluminium, anodised as standard - Large table extension on telescopic arm guided and longitudinally displaceable - Extendable aluminum telescopic stop, angle-adjustable with professional stop flaps - Rip fence with quick release and fine adjustment - Large work table made of milled gray cast iron remains permanently plan - The standard table extension and table extension extension make it easy to work with larger ones workpieces - Quiet running and precise cuts - Equipped with a powerful three-phase motor - The large dimensioned saw aggregate Gray iron is doubly fixed to the cast iron table and is a guarantee for stability, precision, smooth running and long lifetime - Maximum cutting height is also when installed scoring device reached Made in Italy Equipment details: Double cradle saw unit - Oversized, made of steel/cast iron - Close to the saw blade, supported on both sides for precision, smooth running and a long service life - Adjustable in height and up to 45° using a crank - Maximum cutting height is also when installed scoring device reached - Also available with scoring unit telescopic stop - Extendable telescopic stop up to max. 2550 mm - Angle adjustable - With professional stop flaps Aluminum sliding carriage - With a thousand times proven ball contact system - Resistant to dust and dirt minimum point of contact between ball and trapeze rail - 10-year Holzkraft guarantee against wear and tear guideways Rip fence with round rod guide - With fine adjustment and quick release - Stable round rod guide made of ground 45mm diameter steel - Foldable as standard for cutting large ones workpieces Technical specifications: Dimensions and weights Weight approx. 385 kg Dust extraction connection Suction connection diameter 120 mm Suction connection diameter saw blade protection 60 mm electrical data Coedhgij8i Drive motor power 5.0 kW Connection voltage 400 V Format sliding carriage and table Format slide length 2600 mm Format sliding carriage width 270 mm Format sliding carriage height 124 mm Table length 840 mm Table width 560 mm Table height 900 mm circular saw unit Cutting width with rip fence 900 mm Max. cutting width to the left of the saw blade 2310 mm trimming length 2600 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Diameter (main) saw blade 315 mm Speed of (main) saw blade 4000 rpm PU 1 Scope of delivery: Table extension and table widening Anodized aluminum format sliding carriage Aluminum folding stops Rip fence with round rod guide and fine tuning Item No. 5504326

more

Listing

Gerolzhofen

7,947 km

SCM / Holzkraft sc 2c

€4,199

Call

Condition: new, - NEW - - Cutting plane directly on the saw blade - Large dimensioned cast iron saw unit double on the cast iron table fastened - guarantee for stability, precision, smooth running and long service life - Precision-guided format sliding carriage made of aluminium, standard anodized - 10-year HOLZKRAFT guarantee on wear and tear on the guideways of the sliding carriage - Rip fence with round rod guide and fine adjustment as standard - Large work table made of milled gray cast iron - Quiet running and precise cuts - Enable standard table widening and table extension easy work with larger workpieces - Extendable aluminum telescopic fence with angle adjustment and two professional folding stops -Made in Italy TECHNICAL SPECIFICATIONS Dimensions and weights Weight (net) approx. 295 kg Connection suction Suction connection diameter 120 mm Suction connection diameter saw blade protection 60 mm installation information Transport width 700 mm Machine body length 802 mm Machine body width/depth 615 mm Space required length 3860 mm Space requirement width/depth 2750 mm Explanation of space requirements The dimensions take into account maximum travel distances or usable lengths Working area length 1000 mm Working area width/depth 2000 mm Explanation of work area Please add the specified dimensions to the space required to calculate the to obtain the recommended free installation space for the machine. electrical data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 4.0 kW Rated operating mode drive motor S 6 Duty cycle drive motor 40% Sliding carriage and table Format slide length 1600 mm Format sliding carriage width 270 mm Format sliding carriage height 124 mm Table length 1020 mm Table width 325 mm Rxks7 Table height 860 mm circular saw unit Cutting width with rip fence 900 mm Max. cutting width to the left of the saw blade 1660 mm trimming length 1600 mm Saw blade inclination 90 - 45° Max. cutting height 90° 100 mm Max. cutting height 45° 79 mm Saw blade diameter 315 mm Saw blade speed 4000 rpm FURNISHING Anodized aluminum format sliding carriage Handle for sliding carriage trimming frame Saw rip fence with round rod guide Stops Two professional folding stops trimming shoe eccentric clamp table extension table extension saw blade guard  

more

Listing

Gerolzhofen

7,947 km

Sizing saw

Holzkraft FKS 550-3200 PRO

€15,390

Call

Condition: new, - new - Description: - Saw blade tilt and height adjustment is manual - Max. Cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ - High dead weight ensures vibration-free running - Large cantilever table with material roller - Rip fence with round bar guide - Extendable aluminum longitudinal fence with two folding stops - 7,5 kW main motor mounted on robust cast iron frame - Quadruple bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity - Multiple locking device on sliding table - Standard with table widening and table extension made of sheet steel - Large pendulum protection hood conveniently swivels up with the help of a gas pressure spring - Saw blade clamping via tool-free Rapid system Technical data: Dimensions and weights Mvgoftvg0 Length approx. 3386 mm Height approx. 1330 mm Width/Depth approx. 3703 mm Weight approx. 1102 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade guard 80 mm Electrical data Supply voltage 400 V Input power 8,3 kW Motor speed 2800 min¯¹ Mains frequency 50 Hz Output power 7,5 kW Sliding carriage and table Format sliding carriage length 3200 mm Format sliding carriage height 890 mm Table width 685 mm Format sliding carriage width 416 mm Table length 1255 mm Table height 890 mm Noise emission Sound pressure level 96,5 dB(A) Circular saw unit Cutting width with rip fence 1450 mm Saw blade inclination 90 - 45° Max. Cutting height 45°140 mm Speed of saw blade 2800/3665/4800 min¯¹[Max. Cutting width to the left of the saw blade 3200 mm Max. Cutting height 90° 200 mm Diameter saw blade 550 mm Scoring unit Diameter scoring saw blade 120 - 130 mm Speed scoring saw blade 8000 min¯¹ Item no.: 5200550

more

Listing

Gerolzhofen

7,947 km

SCM / Holzkraft Typ sc 1g

€3,299

Call

Condition: new, The work table made of heavily ribbed gray cast iron and guarantee the base made of welded steel Torsion resistance and vibration-free working High quality machine at a real entry-level price Unique in this performance class: - Format sliding carriage made of anodized aluminum for the highest cutting precision - Cutting plane directly on the saw blade - Swiveling saw blade unit from 90 - 45 ° - Table bracket with aluminum crosscut fence and adjustable Stop flap for plates and large workpieces - Rip fence with round bar guide and fine adjustment - Powerful engine - Made in Europe Dimensions and weights Weight (net) approx. 170kg Dust extraction connection Extraction nozzle diameter 120mm Exhaust nozzle diameter saw blade protection 60mm Transport width 680 mm Working area 1600 mm x 2300 mm Space requirement 2613.5 mm x 2134 mm Please add the specified dimensions with the space required to obtain the recommended free space for the machine. The dimensions take into account maximum travels or usable lengths Electrical data 400 V supply voltage Drive motor 1.8 kW Phase (s) 3 Ph Nominal operating mode drive motor S6 Current type AC Duty cycle drive motor 40% Mains frequency 50 Hz Sliding carriage and table Format sliding table 1140 mm x 200 mm x 70 mm Table 1024 mm x 224 mm x 900 mm saw unit Cutting width with rip fence 700 mm Max. Cutting height 90 ° 67mm Max. Cutting width to the left of the saw blade 1200 mm Max. Cutting height 45 ° 40mm Edging length 1200 mm Saw blade diameter 250mm Saw blade inclination 90 - 45 ° Saw blade speed 3900min¯¹ scope of delivery table extension Anodized aluminum sliding table Rip fence with round bar guide and fine adjustment Aluminum folding stop Eccentric 0immgyy2 Item No. 5504113

more

Listing

Gerolzhofen

7,947 km

SAC CS 450

€11,500

Call

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mm used, top condition, top equipment Make SAC Type CS 450 Year of construction 2003 Machine no. LD 2206 CE-type tested Motor 5.5 kW Steel guides Car length approx. 3200 mm Cutting width approx. 1550 mm de diameter 450 mm swiveling up to 45 ° Scoring unit Control panel can be swiveled at the top Rip fence with automatic control Table top extension approx. 940 mm x 650 mm Electric height adjustment Positioning control 3 axes Digital display: - Height - cutting angle - Rip fence - Rotation speed Extraction connection D 100 mm / 120 mm Required space approx. 3400 mm x 3700 mm x 1800 mm Weight approx. 1500 kg Total connected load approx. 6.25 kW Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, Dgmsnhh without guarantee and warranty

more

Listing

Gerolzhofen

(dealership location)

7,947 km

Steton Typ SC 400/3200

Call

Condition: used, used, good conditionMake StetonType SC 400 / 3200CE type testedMotor boosted 6.5 kWTrolley length approx. 3200 mmCutting width approx. 1300 mmmax. blade diameter 400 mmswiveling up to 45°scoring unitparallelogram protectioncontrol panel aboveRip fence with electrical adjustmentTable top extension approx. 400 x 800 mmElectric height adjustmentSwivel adjustment electricDigital display:- cutting angle- Rip fence- Rotational speedExtraction connection D 120 / 60 mmSpace requirement approx. LxWxH mm3400x2300x1700Weight approx. 1000 kgStorage location 97447 GerolzhofenHandover in the current condition as seen- free loaded - Ffcal0z

more

Listing

Gerolzhofen

(dealership location)

7,947 km

Panhans Typ 688

€5,500

Call

Condition: used, Year of construction: 1989, with electrical height and swivel adjustment used, great conditionPanhans makeType 688Year of manufacture 1989Machine no. 287GS-approvedMotor 5.5 kWbrakeCutting width approx. 1250 mmCutting length approx. 2700 mmswiveling up to 45 °Scoring unitParallelogram protectionElectric height adjustmentElectric swivel adjustmentAngle stop as a miter stopExtraction connection D 120 mm / 80 mmRequired space approx. 2800 mm x 3400 mm x 1400 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Bsecjyqfp7

more

Listing

Gerolzhofen

7,947 km

panel saw

Kölle KS 340

€8,200

Call

Condition: used, Year of construction: 1998, with parallelogram cross table Digital used, good condition Make Koelle Type KS 340 Year of construction 1998 CE type tested Trolley length approx. 3115 mm Cutting width approx. 1000 mm Ffbgdar swiveling up to 45° scoring unit Digital display: - Rip fence - angle stop - Parallelogram table Extraction connection D 120/80 mm Required space approx. 3300 mm x 1900 mm x 1600 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

more

Listing

Gerolzhofen

7,947 km

Panel saw

Altendorf F90

€2,700

Call

Condition: used, Year of construction: 1973, used, good condition Gw3jrsa make Altendorf type F90 year of construction 1973 machine no. 73-6-88 carriage length approx. 3000 mm cutting width approx. 800 mm parallelogram protection suction connection D 80/120 mm space requirement approx. 3000 mm x 1200 mm x 1600 mm weight approx. 1000 kg storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

more

Listing

Gerolzhofen

7,947 km

panel saw

SCM nova si 400ep

€14,900

Call

Condition: new, Basic equipment and accessories 10-year guarantee on the guide system of the saw carriage - Saw carriage with anodized aluminum profile guide made of hardened, ground and flanged steel guides - Saw carriage length 3200mm - "READY" electronic control; 2-axis control (3rd axis on request) with: - Height adjustment and inclination of the saw unit (control of the rip fence on request) - Management of the tool data with automatic correction of the Cutting height in relation to the angle of inclination of the saw blade - Manual, semi-automatic and automatic mode with 99 storable work programs - Additional functions: calculator and hour meter - Trimming frame for quick positioning of the stop miter cuts - Table extensions in the outlet - Cutting length at the rip fence 1270 mm - 2-axis control with 99 programs Motor 7kW 50Hz (8kW 60Hz) - Motor with direct connection with push buttons - Three main saw blade speeds - Scoring unit with independent motorization, externally adjustable and Stops for easy saw blade positioning Security/Protection - Emergency stop button on the front - Emergency stop button on the side near the rip fence (Version CE) - Thermal protection switch - Saw blade swing protection (version CE) integrated suction, suction nozzle with a diameter of 80 mm - Saw blade swing protection with integrated suction, suction nozzle with 80 mm diameter - Automatic motor brake on the main saw blade (CE version) - Lockable main switch - 110 V auxiliary circuit - CE Declaration of Conformity (CE version) Technical specifications Max cutting height at 90° (mm) 140 with blade 400 Max cutting height at 45° (mm) 97 with blade 400 Saw blade tilt (degrees) 45 Programmed lifting and swiveling of the saw blade unit Dzwvwm Saw blade speed (rpm) 3000- 4000- 5000 Scorer speed (rpm) 8500 Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5) Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7) Format cuts: - with trolley 1600 (mm) n.a. - with trolley 3200 (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Suction nozzle diameter: - on frame (mm) 120 - on the saw blade guard (mm) 80 - on the riving knife (mm) n.a. Net weight base machine (kg) 1050 109999 Execution according to safety regulations R10078 nova si 400ep CE version 930731 volts 400 EU 931201 Frequency 50 Hz 570343 Digital readout for rip fence Complete with: - Digital display and magnetic tape 570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60) 083202 base 109993 MACHINE LANGUAGE: German

more

Listing

Gerolzhofen

7,947 km

Construction table saw

Holzkraft Typ BKS 500

€869

Call

Condition: new, - NEW - Description: - Optimal user safety due to the pendulum safety- Protective cover - meeting the strictest requirements and approval by BG - Transparent protective cover for an optimal view of the cutting line - Angle-adjustable cross-cutting device with wedge-cutting jig Round rod guided over maintenance-free plain bearings - Aluminum parallel stop with high and flat application edge and Eccentric clamping allows the trimming of boards, Cuttings, bevel and angle cuts - Folding table extension for long workpieces - Durable cutting precision of the highest quality powerful engine Equipment: -penetric safety guard, transparent -Stable, foldable tubular frame, galvanized and powder-coated -Green, non-slip rubber foot plates Angle-adjustable cross-cutting device with wedge-cutting jig, foldable - Aluminum parallel stop with high and flat application edge - Table extension (800 x 400 mm), can be folded down - Large crane eyelets - Phase inverter - Brackets for aluminum parallel stop and assembly tool Delivery: - HM saw blade Ø500mm Z44 - Hinged table extension 800 x 400mm - Pendulum safety guard - Sliding block - Push handle - Tool for changing saw blades Coeetafe82 Technical specifications: Saw Blade-D 500 mm Z44 Max. Cutting height 90 ° 150 mm Cutting width with longitudinal stop 370 mm Cutting depth before saw blade with cross-cutting jig 250 mm Speed of main saw blade 2800 mm Sound power level at idle 103 dB Power consumption 4.2 kW Connection voltage 400V / 50 Hz Suction nozzle-D top / bottom 50 mm / 95 mm Table size (LxW) 1000x660 mm Working height 860 mm Dimensions (LxBXH max.) 1870x810x1170 mm Weight 103 kg No. 5740500 Availability on request

more

Listing

Gerolzhofen

7,947 km

sliding table saw

Altendorf WA 80 TE

€18,630

Call

Condition: new, - New - Basic equipment: - Electromotive height and Swivel adjustment 0 - 46 ° for the main saw blade - Sliding trolley, trolley length 3000 mm - rip fence with manual adjustment, adjustable via measure cocoa, including manual fine adjustment, - cutting width, 1000 mm - Angle stop with a fixed 90 ° position, manually adjustable using a measuring scale up to 3200 mm - Saw blade protrusion max. 150 mm - Saw blade diameter max. 450 mm - Drive motor 4 kW (5.5 PS) with 1 speeds 4000 rpm - AKE tool clamping system for the main saw blade Item No. M19308 included: - sliding table with a length of 3200 mm Item No. M34302 - Motor surcharge 5.5 kW (7.5 HP) 3 speeds Item No. M51061 - Crosscut miter fence lengths up to 3500 mm Yrij02g3 Item No. M44071

more

Listing

Gerolzhofen

7,947 km

panel saw

Altendorf WA 6

€7,560

Call

Condition: new, -New- CE version - The WA 6 is the smallest Altendorf sliding table saw, that exist. - Despite its smaller dimensions, it impresses great achievements. B93vesd9xy - She trumps herself with her strong equipment big in the smallest space. - The cutting quality and flexibility are outstanding in daily use. Technical specifications: Double trolley length 2000 mm Motor 4 kW, speed 4200 rpm. Scoring unit 0.37 kW Cutting height max. 100 mm, at 45° max. 72 mm manual height and swivel adjustment 0-45° Cutting width 1000 mm, manually adjustable Cut to length on the miter stop up to 2600mm Suction connection top/bottom 50/100 mm Working height 910 mm Weight from 450 kg

more

Listing

Gerolzhofen

7,947 km

sliding table saw

Altendorf WA 80 TE

€17,500

Call

Condition: new, - New - Basic equipment: - Electromotive height and Swivel adjustment 0 - 46 ° for the main saw blade - Sliding trolley, trolley length 3000 mm - rip fence with manual adjustment, adjustable via measure cocoa, including manual fine adjustment, - cutting width, 1000 mm - Angle stop with a fixed 90 ° position, manually adjustable using a measuring scale up to 3200 mm - Saw blade protrusion max. 150 mm - Saw blade diameter max. 450 mm - Drive motor 4 kW (5.5 PS) with 1 speeds 4000 rpm - AKE tool clamping system for the main saw blade Item No. M19308 included: - sliding table with a length of 3200 mm Item No. M34302 - Motor surcharge 5.5 kW (7.5 HP) 3 speeds Item No. M51061 C7ozwkz

more

Listing

Gerolzhofen

7,947 km

Altendorf F25 Typ 3 Version 3

€12,040

Call

Condition: new, The Altendorf F 25 offers everything in a small space, what a sliding table saw must be able to do. And that in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: - Manual height and swivel adjustment 0 - 46 ° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. By9cvudwed - Sliding trolley, trolley length 3200 mm - Crosscut-miter fence, lengths up to 3450 mm - Braking device, illuminated button - saw blade diameter max. 315 mm, - Saw blade protrusion max. 104 mm - Cutting height 100 mm, 70 mm at 45 ° - Machine height 88 cm Package 3 including: - 5.5 kW (7.5 HP), 2 speeds - DIGIT X rip fence, 1000 mm - Large suction hood (PSV) - Basic scorer with LED lighting

more

Listing

Gerolzhofen

7,947 km

Altendorf F25 CE 50 Hz, Typ 6

€8,580

Call

Condition: new, The Altendorf F 25 offers everything in a small space, what a sliding table saw must be able to do. And that in uncompromising Altendorf quality. A machine for beginners and professionals alike. basic equipment: - Manual height and swivel adjustment 0 – 46° of the saw blade, with digital display - drive power 4 kW (5.5 hp) with a speed, 4200 rpm. - Double trolley, trolley length 3200 mm - Miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - saw blade diameter max. 315 mm, - Saw blade overhang max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Package 6 including: - 4 kW (5.5 hp), 1 speed - Rip fence, 1000 mm* - Splitting wedge extraction hood - Without scorer (prepared for the subsequent installation of a Poal2 scoring unit) M18200

more

Listing

Gerolzhofen

7,947 km

Altendorf F25 CE Typ 5 Paket 5

€10,850

Call

Condition: new, A machine for beginners and professionals alike. basic equipment: - Manual height and swivel adjustment 0 – 46° of the saw blade, with digital display - drive power 4 kW (5.5 hp) with a speed, 4200 rpm. - Double trolley, trolley length 3200 mm - Miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - saw blade diameter max. 315 mm, - Saw blade overhang max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Bsjhzk7fpg Package 5 including: - 5.5 kW (7.5 hp), 2 speeds - Rip fence DIGIT X, 1000 mm* - Large extraction hood (PSV) - Without scorer (prepared for the subsequent installation of a scoring unit)

more

Listing

Gerolzhofen

7,947 km

Altendorf WA 6

€7,760