Teach-in lathe

WEILER C30

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Bsnt8Plaeu0 Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: good (used), Turning diameter over bed 330 mm Fzjfxlo Center distance 750 mm Spindle speeds 1-4'500 rpm Control: WEILER C3

Condition: ready for operation (used), Year of construction: 2002, operating hours: 25,913 h, Functionality: fully functional, machine/vehicle number: 943, spindle bore: 66 mm, turning diameter: 570 mm, quill diameter: 80 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, workpiece weight (max.): 1,600 kg, TECHNICAL DETAILS Turning diameter: max. 570 mm Turning length: max. 1,000 mm Center height: 280 mm Rotation diameter over slide: max. 340 mm Rotation diameter in the offset: max. 600 mm Chuck diameter: 215 mm max. workpiece weight: 1,600 kg Spindle Spindle diameter (bearing): 100 mm spindle bore: 66 mm Spindle holder: MK 5 Speed range: 1 - 2,500 rpm Tailstock Pinole diameter: 80 mm Power and weight Total power requirement: 30 kW Machine weight: approx. 3 t Switch-on hours (as of October 2024): 25,913 h Cfqlwjztn8 EQUIPMENT - 215 3-jaw chuck RÖHM - Parat holder - Central lubrication - Coolant device - Tailstock

Condition: used, Year of construction: 2001, turning length 3.000 mm centre height 650 mm max. swing diameter over bed 1.300 mm Max. Circulation Ø over cross slide 930 mm max. rotation diameter in the crank 1.330 mm Length of the offset in front of the faceplate 230 mm max. workpiece weight 6.000 kg work spindle: spindle turning speed - stepless 1 - 900 U/min spindle head DIN 55027 spindle diameter in front bearing 235 mm faceplate diameter 1.100 mm max. torque 8.000 Nm spindle bore 165 mm chucking diameter 1.000 mm Support: worktool system AGW chisel cross-section 40 x 40 mm face stroke 590 mm tail stock: quill cone MK 6 dia. of quill 140 mm Dqn3Dr quill stroke 300 mm feeds: longitudinal slide min/max 0,001 - 20 mm/U cross slide min/max 0,001 - 20 mm/U rapid travel - longitudinal/face 10 / 5 m/min Installation data: connected load 55kVa/400V/50Hz In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. incl. face plate, see photos Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: good (used), Special prices for cover rotary table 380 -- Centrikator - Weiler 260 - Kellenberger U600 - SK 50 holders -- Bohrmaster Dqnsjp

Condition: good (used), Year of construction: 1996, Weiler lathe Cpyxz7Hbd3 Type Condor B Center height 165 mm Center width 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle head DIN 55027 size 5 Spindle bore 40 mm Inner taper main spindle MK 5 Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Weight 1040 kg 3 jaw lathe chuck 4 jaw lathe chuck Multifix B Rotating center punch

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, Lead and spindle lathe Weiler Commodor Ctf2W0In Item number: 04-03-106 Manufacturer: Weiler Very good general condition Machine workshop tested Delivery time: Subject to immediate prior sale Year of construction: approx. 1985 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Heidenhain Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter over support: approx. Ø190mm Max. turning length: approx. 1000mm Max. rod passage: approx. Ø56mm Spindle: Speed ​​range: approx. 25-2000 rpm Spindle nose: A2-6 Drive power: approx. 4 kW Automatic longitudinal & plan feeds: Feed range: approx. 0.011-0.80 mm/rev Suitable for threads: metric 0.30-10mm inch 80-2 3/4 G/'' Diametric pitch thread 80-5.5 Dp module 0.2-5 Tailstock: MK4 Accesories: 3-axis digital display Heidenhain 3-jaw chuck Ø 200mm Quick change holder size B+1 insert Bed stop Work light Coolant device Complete machine documentation Emergency stop switch Various tension wrenches Electric feed protection Further accessories on request Price and further technical data on request

Condition: used, Year of construction: 1982, greates pass round over bed 297 mm swing diameter over slide rest 160 mm turning length 500 mm centre distance 500 mm turning speeds 15 - 3550 U/min Dqnaxt spindle head Gr. 5 (DIN 55022) spindle bore 36 mm tailstock quill taper MT 3 tailstock quill stroke 90 mm tailstock adjustment 500 mm 1440 / 2830 1/min engine output 3 / 2,2 kW weight 0,8 t dimensions of the machine ca. 1,40 x 0,70 x 1,20 m Chuck protection device with electrical switch-off Tool cabinet with various contents

Condition: excellent (used), Functionality: fully functional, Weiler Primus lead and pull spindle lathe with 3 axis digital readout Fagor from training workshop !!! Technical data: >> Year of construction ca.1985 Machine-No.2455 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch Covbco0Juo >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital readout from Fagor >> 1 three-jaw chuck 125mm with 1 set of jaws >> Collet chuck device with collets from 1mm to 20mm 1 mm increasing >> Mulifix size A with 2 steel holders >> Electronic spindle guard >> Rear panel To the machine : We are offering a Weiler Primus lead and feed spindle lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: used, Year of construction: 1997, turning length 3.000 mm centre height 450 mm max. swing diameter over bed 900 mm Max. Circulation Ø over cross slide 530 mm max. rotation diameter in the crank 960 mm Length of the offset in front of the faceplate 230 mm max. workpiece weight 6.000 kg work spindle: spindle turning speed range 1.120 U/min spindle head DIN 55027 spindle diameter in front bearing 178 mm faceplate diameter 800 mm mm max. torque 6.000 Nm spindle bore 128 mm chucking diameter 500 mm Support: worktool system Parat chisel cross-section 40 x 40 mm face stroke 590 tail stock: quill cone MK 6 quill stroke 300 mm diameter of quill 140 mm feeds: longitudinal slide min/max 0,001 - 20 mm/U cross slide min/max 0,001 - 20 mm/U Cnu0Djk9Kq rapid travel - longitudinal/face 10 / 5 m/min Installation data: connected load 55kVA/400V/50Hz In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1980, turning diameter over bed 155 mm turning diameter over slide rest 330 mm turning length mm total power requirement 3 kW Cntpimkl3E weight of the machine ca. 1 t dimensions of the machine ca. m

Condition: used, turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning length 800 mm centre height 155 mm centre distance 800 mm spindle bore 38 mm spindle turning speed range 24 - 2800 U/min Cmfqwqsa8W spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,026 - 1,253 mm/U feeds - cross 0,013 - 0,628 mm/U dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 110 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of machine L x W x H 2,05 x 0,70 x 1,26 m Accessories: new 3-jaw chuck BISON, 160 mmø, with jaws for internal and external clamping, collet fixture with various collets, MULTIFIX-head, solid center, coolant

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, Lead and pull spindle lathe Weiler Intern 160 *Partially overhauled Item number: 04-03-218 Manufacturer: Weiler Delivery time on request Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kgDigital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter over support: approx. Ø198mm Max. turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed ​​range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW B0Nbwm2Feb Automatic longitudinal & plan feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm Inch 80 – 2 Gg/” Diametrically - pitch thread 200 - 5 Dp module 0.2 - 4 Tailstock: MK3 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 160mm *New* Quick-change holder size A + 1 insert Bed stop Work light *New* Coolant system *New* Complete documentation Emergency stop switch Various tension wrenches Machine feet Electric feed protection *New* Guide and pull spindle cover Drill chuck *Optional* Revolving tip *Optional* Collet device 386E *Optional* Collet set 386E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Condition: used, Year of construction: 1982, greates pass round over bed 297 mm swing diameter over slide rest 160 mm turning length 500 mm turning speeds 15 - 3550 U/min centre distance 500 mm spindle head Gr. 5 (DIN 55022) Co2Rwf220O spindle bore 36 mm tailstock quill taper MT 3 tailstock quill stroke 90 mm tailstock adjustment 500 mm 1440 / 2830 1/min engine output 3 / 2,2 kW weight 0,8 t dimensions of the machine ca. 1,40 x 0,70 x 1,20 m Chuck protection device with electrical switch-off Tool cabinet with various contents

Condition: excellent (used), Functionality: fully functional, D537 Weiler Primus lead and feed spindle lathe with 3 axis digital readout Fagor from training workshop !!! Technical data: >> year of construction approx. 1985 machine no. 2872 >> Center height 120 mm Bnqspfqaf3 >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital readout from Fagor >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1mm to 20mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Interchangeable wheels >> Electronic spindle protection >> Rear panel To the machine : We are offering a Weiler Primus lead and feed spindle lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: good (used), Year of construction: 1990, Technical data: Center width 2000 mm Center height 260 mm Spindle bore 71 mm Swing diameter over bed 535 mm Swing diameter over cross slide 345 mm . Speeds from up to 2550 rpm Speeds infinitely adjustable in each gear stage by means of frequency converter . Dql8Pv Drive power 7.5 kW .

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, machine/vehicle number: 2385, For sale: Weiler Praktikant 160 lathe Year of construction: 1990 Features: Equipment Weiler lathes: 3-jaw chuck with jaw chuck key 1 rotating turning center 1 drill chuck Dql8Lt 1 driving flange with turning center 2 tool holders with clamping wrench Collet set 3-axis Heidenhain digital readout Quick-change steel holder Multifix type A Chuck guard Technical data: Turning diameter over bed: 320 mm Turning diameter over support: 198 mm Turning length: 650 mm Bar passage: Ø 40 mm Speed range: 96 - 2500 rpm Feed range: 0.007 - 0.63 mm/rev Tailstock: MK 3 Total power requirement: 2.2 kW Weight: approx. 1000 kg Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Condition: The machine is in a ready-to-use condition. It can be demonstrated under power by arrangement. Price: On request Contact us for more information or to arrange a viewing!

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Lead and pull spindle lathe Weiler Commodor *partially overhauled* Item number: 04-03-117 Manufacturer: Weiler Delivery time on request Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter over bed: approx. Ø380mm Bi3Hohs3Zrk Max. turning diameter over support: approx. Ø190mm Max. turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed ​​range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic longitudinal & plan feeds: Feed range: approx. 0.011-0.80 mm/rev Suitable for threads: metric 0.30-10mm inch 80-2 3/4 G/'' Diametric pitch thread 80-5.5 Dp module 0.2-5 Tailstock: MK4 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 200mm *New* Quick-change holder size B + 1 insert Bed stop Work light *New* Coolant system *New* Complete documentation Emergency stop switch Various tension wrenches Machine feet Electric feed protection *New* Guide and pull spindle cover *New* Drill chuck *Optional* Revolving tip *Optional* Collet device 173E *Optional* Collet set 173E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe in toolmaker accuracy with 3-axis digital readout from Weiler CE compliant !!! Dqmcr9 Technical data: >> Year of construction 1998 Machine no. 2527 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from Weiler DZ >> 1 piece three-jaw chuck new 160mm 2 sets of jaws >> 1 piece four-jaw chuck 160mm 1 set of jaws >> Collet chuck device Collets from 3 to 26mm 1 mm increasing >> Machine lamp >> Mulifix size B with 3 steel holders >> Bed stop >> Coolant device To the machine : We are offering a used Weiler Condor B built in 1998 in very good condition with CE marking. The machine is of course fully functional. A very robust and powerful machine. The 3-axis digital display from Weiler makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This new generation of Weiler lathes is very user-friendly. Take the opportunity to view and try out this machine under power on site.

Condition: good (used), Year of construction: 1990, with frequency converter : Center distance 2000 mm Center height 260 mm spindle bore 71 mm Swing diameter over bed 535 mm Swing diameter over cross slide 345 mm Clv7Qpd9Xg . Speed series, max. 2500 rpm Speeds infinitely adjustable in each gear stage by means of frequency converter . Drive power 7.5 kW .

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 1838, For sale: Weiler Praktikant 160 lathe Year of manufacture: 1989 Features: Equipment Weiler lathes: 3-jaw chuck with jaw chuck key 1 rotating turning center 1 drill chuck 1 driving flange with turning center 2 tool holders with clamping wrench Collet set 3-axis Heidenhain digital readout Quick-change steel holder Multifix type A Chuck guard Technical data: Turning diameter over bed: 320 mm Turning diameter over support: 198 mm Turning length: 650 mm Bar passage: Ø 40 mm Dql8Lj Speed range: 96 - 2500 rpm Feed range: 0.007 - 0.63 mm/rev Tailstock: MK 3 Total power requirement: 2.2 kW Weight: approx. 1000 kg Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Condition: The machine is in a ready-to-use condition. It can be demonstrated under power by arrangement. Price: On request Contact us for more information or to arrange a viewing!

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Lead and pull spindle lathe Weiler Commodor – partially overhauled Item number: 04-03-111 Manufacturer: Weiler Model: Commodor Condition: Very good general condition, partially overhauled Year of construction: approx. 1991 Availability: On request, subject to prior sale Machine description: For sale is a Weiler Commodor lead and pull screw lathe in excellent condition. The machine has been partially overhauled and equipped with modern features such as a new 3-axis digital display and other useful accessories. It is ideal for precise machining tasks in metal processing and offers a reliable and long-lasting solution for workshops and industrial applications. Technical data: Dqmoqp Dimensions (L x W x H): approx. 2200 x 1200 x 1800 mm Weight: approx. 1500 kg Max. turning diameter over bed: approx. Ø380 mm Max. turning diameter over support: approx. Ø190 mm Max. turning length: approx. 1000 mm Rod passage: approx. Ø56 mm Speed ​​range: approx. 25-2000 rpm Drive power: approx. 4.0 kW Automatic feeds: longitudinal and planar feeds 0.011–0.80 mm/rev Threading: Metric 0.30-10mm, Inch 80-2 3/4 G/'' and other options Accessories included: New 3-axis digital display SINO New 3-jaw chuck 200 mm Quick-change holder (size B) with 1 insert Bed stop, work light (new), coolant system (new) Complete documentation, emergency stop, various clamping wrenches Electric feed protection (new) Optional accessories: Drill chuck, rotating tip, lead and pull spindle cover Collet device 173E, collet set 173E Additional quick-change holder Price and further technical details on request Errors and input errors excepted

Condition: like new (used), Functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated Cmbixmdsrc >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 1833, For sale: Weiler Praktikant 160 lathe Year of manufacture: 1989 Features: Equipment Weiler lathes: 3-jaw chuck with jaw chuck key 1 rotating turning center 1 drill chuck 1 driving flange with turning center 2 tool holders with clamping wrench Collet set 3-axis Heidenhain digital readout Quick-change steel holder Multifix type A Chuck guard Technical data: Turning diameter over bed: 320 mm Clvqphv3S0 Turning diameter over support: 198 mm Turning length: 650 mm Bar passage: Ø 40 mm Speed range: 96 - 2500 rpm Feed range: 0.007 - 0.63 mm/rev Tailstock: MK 3 Total power requirement: 2.2 kW Weight: approx. 1000 kg Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Condition: The machine is in a ready-to-use condition. It can be demonstrated under power by arrangement. Price: On request Contact us for more information or to arrange a viewing!

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 1333, For sale: Weiler Praktikant 160 lathe Year of construction: 1988 Features: Equipment Weiler lathes: 3-jaw chuck with jaw chuck key 1 rotating turning center 1 drill chuck 1 driving flange with turning center 2 tool holders with clamping wrench Collet set 3-axis Heidenhain digital readout Quick-change steel holder Multifix type A Chuck guard Technical data: Turning diameter over bed: 320 mm Dql8Kl Turning diameter over support: 198 mm Turning length: 650 mm Bar passage: Ø 40 mm Speed range: 96 - 2500 rpm Feed range: 0.007 - 0.63 mm/rev Tailstock: MK 3 Total power requirement: 2.2 kW Weight: approx. 1000 kg Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Condition: The machine is in a ready-to-use condition. It can be demonstrated under power by arrangement. Price: On request Contact us for more information or to arrange a viewing!