Unisign uniport 6000
Unisign uniport 6000

Name: Unisign uniport 6000
Brand: Unisign
Availability: InStock

Year of construction

2010

Condition

Used

Location

Germany

Unisign uniport 6000 Unisign uniport 6000

Machine data

Machine type:: Unisign uniport 6000

Manufacturer:: Unisign

Model:: uniport 6000

Year of construction:: 2010

Condition:: ready for operation (used)

Operating hours:: 55,000 h

Price & Location

Location:: , Germany

Call

Technical details

Travel distance X-axis:: 10,000 mm

Travel distance Y-axis:: 1,500 mm

Travel distance Z-axis:: 1,000 mm

Spindle speed (max.):: 6,000 rpm

Spindle motor power:: 36,000 W

Controller manufacturer:: SIEMENS

Controller model:: Sinumerik 840 D

Number of axes:: 3

Details about the offer

Listing ID:: A217-19178

Reference number:: DE-MIL-UNI-2010-00001

Update:: 15.04.2026

Description

This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details.

• Space requirement: approx. 12 x 11 m
• Passage: height 1,000 mm / width 1,500 mm
• Max torque: 720 Nm
• Gearbox: 2-stage, ratio 1:4
• Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min
• Construction: Gantry design with movable portal bridge and stationary clamping table
• Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted)
• Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head)
• Operation mode: Pendulum machining capability
• Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet
• Coolant system: Operated dry; pre-fitted/ready for coolant use
• Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023
• Installation: Machine recessed and anchored in a foundation pit

Additional equipment

• Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit
• Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe
• Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit
• 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture
• Chip conveyor: Hinged belt type
• Safety fence with Sick light grids
• Makrolon curtains on both sides of the bridge (motorized height adjustment)
• Separation wall with viewing window
• Setup and leveling elements
• Diverse spare parts
• Documentation included

Technical Specification
Taper Size SK 50
Godpoy A Ifmsfx Ai Sobr

Seller

Registered since: 2017

1,248 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

Gantry milling machine Unisign Uniport 6000

Germany

7,781 km

Gantry milling machine
UnisignUniport 6000

Call

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Gedpfx Aiozua N So Sjbr Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

See details

Listing

București

9,243 km

Gear hobbing machine
WMWZFWZ 6300x40

Call

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Gbjdpfsxln Iwex Ai Sor Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

See details

Listing

Bühl

7,895 km

Center Lathe
HEYLIGENSTAEDT400 Ea/4000

Call

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, Gbjdpfjxwp Ehex Ai Ser 1 running steady, running center, coolant

See details

Listing

Screw manufacturing machine Hilgeland CH1 KHA

Lüdenscheid

7,701 km

Screw manufacturing machine
HilgelandCH1 KHA

Call

Listing

Paper box production machinery HGHY EGG TRAY

Bátonyterenye

8,618 km

Paper box production machinery
HGHYEGG TRAY

€1,200,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, PLEASE ONLY SERIOUS ENQUIRIES REGARDING VIEWINGS OF THE PRODUCTION LINE! WE DO NOT INTEND TO DISMANTLE THE LINE IN JANUARY; THE ADVERT COULD NOT BE PROGRESSED OTHERWISE. Gbodpfoya Eh Esx Ai Sjr I am offering for sale a completely unique production line in Hungary. 1. The line manufactures trays suitable for storing 10 eggs, in either continuous or batch operation. From raw material preparation to final delivery, we are offering a complete system for sale. 2. The egg tray production line is located in Bátonyterenye, where a fully serviced industrial site provides all the infrastructure necessary for production. 3. The total output of the line is sold on the domestic market. The complete egg tray production line consists of several units: - Material preparation system, which processes waste paper into mouldable raw material. - HGHY egg tray forming unit, which finalises the trays by drying and hot-air pressing after moulding. - Palletising system, which makes the finished trays ready for transportation. - Auxiliary systems for air, vacuum, power, gas, and water supply.

See details

Listing

Europa

7,904 km

Fine Blanking Press
FEINTOOLHFA 320

Call

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm Gedpfjvwgl Nsx Ai Sjbr table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

See details

Listing

Floor Type Boring and Milling M/C - Hor. COLLET & ENGELHARDT BF 130 - 11

Metzingen

7,973 km

Floor Type Boring and Milling M/C - Hor.
COLLET & ENGELHARDTBF 130 - 11

Call

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Gbedpfst Hwt Ssx Ai Ser Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

See details

Listing

Sankt Margarethen im Lungau

8,333 km

Cylindrical grinding machine
WMWSU

€5,999

Fixed price plus VAT

Call

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Gbedswl A H Depfx Ai Ser Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

See details

Listing

REM CPAF 132 Table Boring Mill | Ø132mm | Fanuc 31iA | 37kW | 2016/2022 REM CPAF 132

Bacău

9,112 km

REM CPAF 132 Table Boring Mill | Ø132mm | Fanuc 31iA | 37kW | 2016/2022
REMCPAF 132

Call

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW Gbsdpfxsrwx U Ij Ai Ser ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

See details

Listing

Table unit from a gantry milling machine, clamping plate with T-slots made of cast steel/cast iron, DROOP & REIN

Hessisch Lichtenau

7,826 km

Table unit from a gantry milling machine, clamping plate with T-slots made of cast steel/cast iron,
DROOP & REIN

€16,000

~~€17,000~~

Fixed price plus VAT

Call

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Gbsdpfx Aisthuzpo Ssr Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

See details

Advertise here