Multipurpose milling machine

TOS FNK 25 A

Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, 800 mm X travel Todpfozi Hihjx Adqja 370 mm Y travel 450 mm Z travel automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 automatic feed and rapid traverse on X and Y axes electric rapid traverse on Z axis Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) machine weight approx. 1.7 tons. year of manufacture: 1986 Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa Tedpfx Ajdkdi Todqoa

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Feed range X – Y / Z: Tsdpfxsxpugne Adqja Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm - Year of construction 2023 Tsdpfoqgcq Hox Adqea - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Condition: used, mileage: 491,328 km, power: 320 kW (435.08 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 9,400 kg, maximum load weight: 6,600 kg, overall weight: 40,000 kg, tire size: 315 / 80 R 22.5 / 15mm, axle configuration: 4x2, wheelbase: 5,000 mm, next inspection (TÜV): 01/2025, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 9,500 mm, total width: 25,500 mm, total height: 38,000 mm, front tire size: 315 / 80 R 22.5 / 15mm, operation weight: 16,000 kg, Equipment: air conditioning,

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Tedpfx Adov Amrysqoa Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings Todpolcbkgefx Adqja - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Year of construction: 1974, condition: refurbished (used), INGRAMATIC RP2 REVISED like NEW M8x90/45 mm. Fixed die length: 115 mm. Moving die length: 130 mm. Die height: 65 mm. 410 ppm Range production: M3 - M8 Completely revised as new. Machine visible in Calolziocorte (LC) - Italy REVIEW ACCORDING TO CE. The review includes: - DISASSEMBLY AND CLEANING OF EVERY PIECE - REPLACEMENT OF ALL BEARINGS - RECTIFICATION OF GUIDES OR POSSIBLE REPLACEMENT IF NOT SUITABLE - REVIEW OF THE INTRODUCER GROUP - OVERHAUL OF THE SLIDE GROUP WITH REPLACEMENT OF BRONZE PARTS - NEW LUBRICATION SYSTEM WITH CONTROL UNIT HYDRAULICS COMPLETE WITH PUMP, LEVEL SWITCH, PRESSURE SWITCH AND DISTRIBUTORS - NEW WATER PUMP - NEW CUP VIBRATOR COMPLETE WITH PANEL VIBRATOR AND PHOTOCELL CONTROL FOR TOO FULL Todpfoipm Risx Adqoa - REVIEW OF THE ROLLER EVACUATION GROUP - PROTECTION CASE COMPLETE WITH LAMP AND MICRO - SOLENOID VALVE INSTALLATION WITH NEW AIR SYSTEM FOR VIBRATOR AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS WITH INVERTER - NEW ENGINE - BELTS REPLACEMENT - RAL PAINTING INDICATED BY YOU

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 7523/OC6199, Equipment: CE marking, Complete cement dosing silo with cement screw conveyor and control panel. The unit has operated for 10 hours. Hour counter on the control panel. Technical manual available. Tedpsyrywlofx Adqsa

Condition: used, functionality: fully functional, Lathe Type: Ucimu brf150 380V Distance between centers: 800 mm Spindle bore: 35 mm Tool height: 25 mm Swing diameter over cross slide: 180 mm Swing diameter over bed: 320 mm Tedpfxewurt Se Adqsa 4-jaw chuck MC2 in tailstock